[PATCH 02/10] ARM: OMAP1: ams-delta: Convert latches to basic_mmio_gpio
Janusz Krzysztofik
jkrzyszt at tis.icnet.pl
Sun Dec 11 15:12:00 EST 2011
Once done, ams-delta specific device drivers currently calling custom
ams_delta_latch[12]_write() functions can call generic gpio_set_value()
instead, which will make them less platform dependent. Even more, some
custom ams-delta only drivers perhaps can be dropped from the tree after
converting selected ams-delta platform devices to follow generic GPIO
based device models.
Created against linux-3.2-rc5.
Requires patch 1/10 "GPIO: gpio-generic: Move initialization up to
postcore" to work correctly.
Signed-off-by: Janusz Krzysztofik <jkrzyszt at tis.icnet.pl>
---
arch/arm/mach-omap1/Kconfig | 1 +
arch/arm/mach-omap1/board-ams-delta.c | 235 ++++++++++++++++++---
arch/arm/plat-omap/include/plat/board-ams-delta.h | 43 +++-
3 files changed, 241 insertions(+), 38 deletions(-)
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 73f287d..1b5f283 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -154,6 +154,7 @@ config MACH_NOKIA770
config MACH_AMS_DELTA
bool "Amstrad E3 (Delta)"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
+ select GPIO_GENERIC_PLATFORM
select FIQ
help
Support for the Amstrad E3 (codename Delta) videophone. Say Y here
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index b0f15d2..d88419e 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,6 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/basic_mmio_gpio.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -40,9 +41,6 @@
#include <mach/ams-delta-fiq.h>
-static u8 ams_delta_latch1_reg;
-static u16 ams_delta_latch2_reg;
-
static const unsigned int ams_delta_keymap[] = {
KEY(0, 0, KEY_F1), /* Advert */
@@ -121,39 +119,32 @@ static const unsigned int ams_delta_keymap[] = {
KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
};
-void ams_delta_latch1_write(u8 mask, u8 value)
-{
- ams_delta_latch1_reg &= ~mask;
- ams_delta_latch1_reg |= value;
- *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg;
-}
-
-void ams_delta_latch2_write(u16 mask, u16 value)
-{
- ams_delta_latch2_reg &= ~mask;
- ams_delta_latch2_reg |= value;
- *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg;
-}
+#define _LATCH1_PHYS 0x01000000
+#define _LATCH1_VIRT 0xEA000000
+#define _MODEM_PHYS 0x04000000
+#define _MODEM_VIRT 0xEB000000
+#define _LATCH2_PHYS 0x08000000
+#define _LATCH2_VIRT 0xEC000000
static struct map_desc ams_delta_io_desc[] __initdata = {
/* AMS_DELTA_LATCH1 */
{
- .virtual = AMS_DELTA_LATCH1_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS),
+ .virtual = _LATCH1_VIRT,
+ .pfn = __phys_to_pfn(_LATCH1_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_LATCH2 */
{
- .virtual = AMS_DELTA_LATCH2_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS),
+ .virtual = _LATCH2_VIRT,
+ .pfn = __phys_to_pfn(_LATCH2_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_MODEM */
{
- .virtual = AMS_DELTA_MODEM_VIRT,
- .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS),
+ .virtual = _MODEM_VIRT,
+ .pfn = __phys_to_pfn(_MODEM_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
}
@@ -173,6 +164,195 @@ static struct omap_board_config_kernel ams_delta_config[] __initdata = {
{ OMAP_TAG_LCD, &ams_delta_lcd_config },
};
+static struct resource _latch1_resources[] __initconst = {
+ [0] = {
+ .name = "dat",
+ .start = _LATCH1_PHYS,
+ .end = _LATCH1_PHYS + ((AMS_DELTA_LATCH1_NGPIO - 1) / 8),
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct bgpio_pdata _latch1_pdata __initconst = {
+ .base = AMS_DELTA_LATCH1_GPIO_BASE,
+ .ngpio = AMS_DELTA_LATCH1_NGPIO,
+};
+
+static struct platform_device _latch1_device = {
+ .name = "basic-mmio-gpio",
+ .id = 0,
+ .resource = _latch1_resources,
+ .num_resources = ARRAY_SIZE(_latch1_resources),
+ .dev = {
+ .platform_data = &_latch1_pdata,
+ },
+};
+
+static struct resource _latch2_resources[] __initconst = {
+ [0] = {
+ .name = "dat",
+ .start = _LATCH2_PHYS,
+ .end = _LATCH2_PHYS + ((AMS_DELTA_LATCH2_NGPIO - 1) / 8),
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct bgpio_pdata _latch2_pdata __initconst = {
+ .base = AMS_DELTA_LATCH2_GPIO_BASE,
+ .ngpio = AMS_DELTA_LATCH2_NGPIO,
+};
+
+static struct platform_device _latch2_device = {
+ .name = "basic-mmio-gpio",
+ .id = 1,
+ .resource = _latch2_resources,
+ .num_resources = ARRAY_SIZE(_latch2_resources),
+ .dev = {
+ .platform_data = &_latch2_pdata,
+ },
+};
+
+static struct platform_device *_latch_devices[] __initconst = {
+ &_latch1_device,
+ &_latch2_device,
+};
+
+static struct gpio _latch_gpios[] __initconst = {
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_CAMERA,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_camera",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_ADVERT,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_advert",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_EMAIL,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_email",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_HANDSFREE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_handsfree",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_VOICEMAIL,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_voicemail",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LED_VOICE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "led_voice",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 6,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "dockit1",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH1_GPIO_BASE + 7,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "dockit2",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "lcd_vblen",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "lcd_ndisp",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_nce",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_nre",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_nwp",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_nwe",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_ale",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_cle",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "keybrd_pwr",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "keybrd_dataout",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "scard_rstin",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "scard_cmdvcc",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "modem_nreset",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "modem_codec",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "hookflash1",
+ },
+ {
+ .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "hookflash2",
+ },
+};
+
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
+{
+ int bit;
+ u16 bitpos;
+
+ for (bit = 0; bit < ngpio; bit++) {
+ bitpos = 1 << bit;
+ if (mask & bitpos)
+ gpio_set_value(base + bit, (value & bitpos) != 0);
+ }
+}
+EXPORT_SYMBOL(ams_delta_latch_write);
+
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
@@ -307,8 +487,8 @@ static void __init ams_delta_init(void)
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
- /* Clear latch2 (NAND, LCD, modem enable) */
- ams_delta_latch2_write(~0, 0);
+ platform_add_devices(_latch_devices, ARRAY_SIZE(_latch_devices));
+ BUG_ON(gpio_request_array(_latch_gpios, ARRAY_SIZE(_latch_gpios)));
omap1_usb_init(&ams_delta_usb_config);
omap1_set_camera_info(&ams_delta_camera_platform_data);
@@ -325,8 +505,8 @@ static void __init ams_delta_init(void)
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
- .membase = IOMEM(AMS_DELTA_MODEM_VIRT),
- .mapbase = AMS_DELTA_MODEM_PHYS,
+ .membase = IOMEM(_MODEM_VIRT),
+ .mapbase = _MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
@@ -387,6 +567,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.init_machine = ams_delta_init,
.timer = &omap1_timer,
MACHINE_END
-
-EXPORT_SYMBOL(ams_delta_latch1_write);
-EXPORT_SYMBOL(ams_delta_latch2_write);
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102d..1b8e759 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -28,13 +28,6 @@
#if defined (CONFIG_MACH_AMS_DELTA)
-#define AMS_DELTA_LATCH1_PHYS 0x01000000
-#define AMS_DELTA_LATCH1_VIRT 0xEA000000
-#define AMS_DELTA_MODEM_PHYS 0x04000000
-#define AMS_DELTA_MODEM_VIRT 0xEB000000
-#define AMS_DELTA_LATCH2_PHYS 0x08000000
-#define AMS_DELTA_LATCH2_VIRT 0xEC000000
-
#define AMS_DELTA_LATCH1_LED_CAMERA 0x01
#define AMS_DELTA_LATCH1_LED_ADVERT 0x02
#define AMS_DELTA_LATCH1_LED_EMAIL 0x04
@@ -66,10 +59,42 @@
#define AMS_DELTA_GPIO_PIN_CONFIG 11
#define AMS_DELTA_GPIO_PIN_NAND_RB 12
+#define AMS_DELTA_GPIO_PIN_LED_CAMERA 232
+#define AMS_DELTA_GPIO_PIN_LED_ADVERT 233
+#define AMS_DELTA_GPIO_PIN_LED_EMAIL 234
+#define AMS_DELTA_GPIO_PIN_LED_HANDSFREE 235
+#define AMS_DELTA_GPIO_PIN_LED_VOICEMAIL 236
+#define AMS_DELTA_GPIO_PIN_LED_VOICE 237
+
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE 243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP 244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE 245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE 246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE 247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
+
+#define AMS_DELTA_LATCH1_GPIO_BASE AMS_DELTA_GPIO_PIN_LED_CAMERA
+#define AMS_DELTA_LATCH1_NGPIO 8
+#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO 16
+
#ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
#endif
+#define ams_delta_latch1_write(mask, value) \
+ ams_delta_latch_write(AMS_DELTA_LATCH1_GPIO_BASE, \
+ AMS_DELTA_LATCH1_NGPIO, (mask), (value))
+#define ams_delta_latch2_write(mask, value) \
+ ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+ AMS_DELTA_LATCH2_NGPIO, (mask), (value))
#endif /* CONFIG_MACH_AMS_DELTA */
--
1.7.3.4
More information about the linux-arm-kernel
mailing list