[PATCH 01/12] ARM: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch]
Kukjin Kim
kgene.kim at samsung.com
Tue Dec 20 07:48:25 EST 2011
This patch introduces common.[ch] which are used only in the
arch/arm/mach-s3c64xx/ directory. The common.c file merges
the cpu.c, irq.c and irq-eint.c which are used commonly on
S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h
and plat/s3c6410.h files.
Cc: Ben Dooks <ben-linux at fluff.org>
Cc: Russell King <rmk+kernel at arm.linux.org.uk>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
arch/arm/mach-s3c64xx/Makefile | 65 ++++-----
arch/arm/mach-s3c64xx/clock.c | 4 +-
arch/arm/mach-s3c64xx/{irq-eint.c => common.c} | 182 ++++++++++++++++++++++--
arch/arm/mach-s3c64xx/common.h | 55 +++++++
arch/arm/mach-s3c64xx/cpu.c | 161 ---------------------
arch/arm/mach-s3c64xx/irq.c | 47 ------
arch/arm/mach-s3c64xx/mach-anw6410.c | 3 +-
arch/arm/mach-s3c64xx/mach-crag6410.c | 3 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 3 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 3 +-
arch/arm/mach-s3c64xx/mach-ncp.c | 3 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 3 +-
arch/arm/mach-s3c64xx/mach-smartq.c | 2 +
arch/arm/mach-s3c64xx/mach-smartq5.c | 2 +-
arch/arm/mach-s3c64xx/mach-smartq7.c | 2 +-
arch/arm/mach-s3c64xx/mach-smdk6400.c | 3 +-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 3 +-
arch/arm/mach-s3c64xx/s3c6400.c | 5 +-
arch/arm/mach-s3c64xx/s3c6410.c | 6 +-
arch/arm/plat-samsung/include/plat/cpu.h | 4 -
arch/arm/plat-samsung/include/plat/s3c6400.h | 36 -----
arch/arm/plat-samsung/include/plat/s3c6410.h | 29 ----
22 files changed, 285 insertions(+), 339 deletions(-)
rename arch/arm/mach-s3c64xx/{irq-eint.c => common.c} (51%)
create mode 100644 arch/arm/mach-s3c64xx/common.h
delete mode 100644 arch/arm/mach-s3c64xx/cpu.c
delete mode 100644 arch/arm/mach-s3c64xx/irq.c
delete mode 100644 arch/arm/plat-samsung/include/plat/s3c6400.h
delete mode 100644 arch/arm/plat-samsung/include/plat/s3c6410.h
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index cfc0b99..f37016c 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -10,54 +10,49 @@ obj-m :=
obj-n :=
obj- :=
-# Core files
-obj-y += cpu.o
-obj-y += clock.o
+# Core
-# Core support for S3C6400 system
+obj-y += common.o clock.o
+
+# Core support
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
-obj-y += irq.o
-obj-y += irq-eint.o
+# PM
+
+obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o
# DMA support
obj-$(CONFIG_S3C64XX_DMA) += dma.o
-# Device setup
+# Device support
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
-obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-y += dev-uart.o
+obj-y += dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
-# PM
+# Device setup
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_PM) += irq-pm.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
+obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# Machine support
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
-obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
-obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
-obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
-obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
-obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
-obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
-
-# device support
-
-obj-y += dev-uart.o
-obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
+obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 39c238d..625219b 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -705,7 +705,7 @@ static struct clksrc_clk *init_parents[] = {
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-void __init_or_cpufreq s3c6400_setup_clocks(void)
+void __init_or_cpufreq s3c64xx_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long xtal;
@@ -804,7 +804,7 @@ static struct clk *clks[] __initdata = {
* as ARMCLK as well as the necessary parent clocks.
*
* This call does not setup the clocks, which is left to the
- * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * s3c64xx_setup_clocks() call which may be needed by the cpufreq
* or resume code to re-set the clocks if the bootloader has changed
* them.
*/
diff --git a/arch/arm/mach-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/common.c
similarity index 51%
rename from arch/arm/mach-s3c64xx/irq-eint.c
rename to arch/arm/mach-s3c64xx/common.c
index 4d203be..8ae5b16 100644
--- a/arch/arm/mach-s3c64xx/irq-eint.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -1,11 +1,13 @@
-/* arch/arm/plat-s3c64xx/irq-eint.c
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
- * Ben Dooks <ben at simtec.co.uk>
- * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben at simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
*
- * S3C64XX - Interrupt handling for IRQ_EINT(x)
+ * Common Codes for S3C64XX machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,21 +15,182 @@
*/
#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/sysdev.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
#include <asm/hardware/vic.h>
-#include <plat/regs-irqtype.h>
+#include <mach/map.h>
+#include <mach/hardware.h>
#include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-#include <mach/map.h>
#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
#include <plat/pm.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irq-uart.h>
+#include <plat/irq-vic-timer.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+/* uart registration process */
+
+void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
+
+/* table of supported CPUs */
+
+static const char name_s3c6400[] = "S3C6400";
+static const char name_s3c6410[] = "S3C6410";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S3C6400_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6400_map_io,
+ .init_clocks = s3c6400_init_clocks,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6400_init,
+ .name = name_s3c6400,
+ }, {
+ .idcode = S3C6410_CPU_ID,
+ .idmask = S3C64XX_CPU_MASK,
+ .map_io = s3c6410_map_io,
+ .init_clocks = s3c6410_init_clocks,
+ .init_uarts = s3c64xx_init_uarts,
+ .init = s3c6410_init,
+ .name = name_s3c6410,
+ },
+};
+
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s3c64xx/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xfffff)
+
+static struct map_desc s3c_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_MEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
+ .pfn = __phys_to_pfn(S3C_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S3C_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_GPIO,
+ .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C64XX_VA_MODEM,
+ .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+ .length = SZ_1K,
+ .type = MT_DEVICE,
+ },
+};
+
+struct sysdev_class s3c64xx_sysclass = {
+ .name = "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+ .cls = &s3c64xx_sysclass,
+};
+
+/* read cpu identification code */
+
+void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
+ iotable_init(mach_desc, size);
+ init_consistent_dma_size(SZ_8M);
+
+ /* detect cpu id */
+ s3c64xx_init_cpu();
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+static __init int s3c64xx_sysdev_init(void)
+{
+ sysdev_class_register(&s3c64xx_sysclass);
+ return sysdev_register(&s3c64xx_sysdev);
+}
+core_initcall(s3c64xx_sysdev_init);
+
+/*
+ * setup the sources the vic should advertise resume
+ * for, even though it is not doing the wake
+ * (set_irq_wake needs to be valid)
+ */
+#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
+#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
+ 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
+
+void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
+{
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
+ vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
+
+ /* add the timer sub-irqs */
+ s3c_init_vic_timer_irq(5, IRQ_TIMER0);
+}
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
#define eint_irq_to_bit(irq) ((u32)(1 << eint_offset(irq)))
@@ -209,5 +372,4 @@ static int __init s3c64xx_init_irq_eint(void)
return 0;
}
-
arch_initcall(s3c64xx_init_irq_eint);
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
new file mode 100644
index 0000000..9f523a2
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben at simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Common Header for S3C64XX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C64XX_COMMON_H
+#define __ARCH_ARM_MACH_S3C64XX_COMMON_H
+
+void s3c64xx_init_irq(u32 vic0, u32 vic1);
+void s3c64xx_init_io(struct map_desc *mach_desc, int size);
+
+void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+void s3c64xx_setup_clocks(void);
+
+extern struct syscore_ops s3c64xx_irq_syscore_ops;
+extern struct sysdev_class s3c64xx_sysclass;
+
+#ifdef CONFIG_CPU_S3C6400
+
+extern int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
+extern void s3c6400_map_io(void);
+extern void s3c6400_init_clocks(int xtal);
+
+#else
+#define s3c6400_init_clocks NULL
+#define s3c6400_map_io NULL
+#define s3c6400_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C6410
+
+extern int s3c6410_init(void);
+extern void s3c6410_init_irq(void);
+extern void s3c6410_map_io(void);
+extern void s3c6410_init_clocks(int xtal);
+
+#else
+#define s3c6410_init_clocks NULL
+#define s3c6410_map_io NULL
+#define s3c6410_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
deleted file mode 100644
index de085b7..0000000
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/cpu.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben at simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX CPU Support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* table of supported CPUs */
-
-static const char name_s3c6400[] = "S3C6400";
-static const char name_s3c6410[] = "S3C6410";
-
-static struct cpu_table cpu_ids[] __initdata = {
- {
- .idcode = S3C6400_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6400_map_io,
- .init_clocks = s3c6400_init_clocks,
- .init_uarts = s3c6400_init_uarts,
- .init = s3c6400_init,
- .name = name_s3c6400,
- }, {
- .idcode = S3C6410_CPU_ID,
- .idmask = S3C64XX_CPU_MASK,
- .map_io = s3c6410_map_io,
- .init_clocks = s3c6410_init_clocks,
- .init_uarts = s3c6410_init_uarts,
- .init = s3c6410_init,
- .name = name_s3c6410,
- },
-};
-
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xfffff)
-
-static struct map_desc s3c_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S3C_VA_SYS,
- .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_MEM,
- .pfn = __phys_to_pfn(S3C64XX_PA_SROM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS),
- .pfn = __phys_to_pfn(S3C_PA_UART),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC0,
- .pfn = __phys_to_pfn(S3C64XX_PA_VIC0),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)VA_VIC1,
- .pfn = __phys_to_pfn(S3C64XX_PA_VIC1),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(S3C_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C64XX_VA_GPIO,
- .pfn = __phys_to_pfn(S3C64XX_PA_GPIO),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C64XX_VA_MODEM,
- .pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
- .length = SZ_1K,
- .type = MT_DEVICE,
- },
-};
-
-
-struct sysdev_class s3c64xx_sysclass = {
- .name = "s3c64xx-core",
-};
-
-static struct sys_device s3c64xx_sysdev = {
- .cls = &s3c64xx_sysclass,
-};
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
-
-/* read cpu identification code */
-
-void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
-{
- /* initialise the io descriptors we need for initialisation */
- iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
- iotable_init(mach_desc, size);
- init_consistent_dma_size(SZ_8M);
-
- /* detect cpu id */
- s3c64xx_init_cpu();
-
- s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
-
-static __init int s3c64xx_sysdev_init(void)
-{
- sysdev_class_register(&s3c64xx_sysclass);
- return sysdev_register(&s3c64xx_sysdev);
-}
-
-core_initcall(s3c64xx_sysdev_init);
diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
deleted file mode 100644
index b07357e..0000000
--- a/arch/arm/mach-s3c64xx/irq.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben at simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX - Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* setup the sources the vic should advertise resume for, even though it
- * is not doing the wake (set_irq_wake needs to be valid) */
-#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE))
-#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \
- 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \
- 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE))
-
-void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
-{
- printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
- /* initialise the pair of VICs */
- vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
- vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
- /* add the timer sub-irqs */
- s3c_init_vic_timer_irq(5, IRQ_TIMER0);
-}
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 2bbc14d..bad1d0d 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -46,13 +46,14 @@
#include <plat/fb.h>
#include <plat/regs-fb-v4.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
+#include "common.h"
+
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 988ac2e..b7350b0 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -51,7 +51,6 @@
#include <mach/regs-gpio-memport.h>
-#include <plat/s3c6410.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
@@ -67,6 +66,8 @@
#include <plat/iic.h>
#include <plat/pm.h>
+#include "common.h"
+
/* serial port setup */
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index c5955f3..df38602 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -38,12 +38,13 @@
#include <plat/fb.h>
#include <plat/nand.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 4415c85..72ebe5d 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -34,7 +34,6 @@
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -46,6 +45,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 9b2c610..8bec707 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -40,12 +40,13 @@
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index dbab49f..853c41e 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -35,7 +35,6 @@
#include <mach/regs-modem.h>
#include <mach/regs-srom.h>
-#include <plat/s3c6410.h>
#include <plat/adc.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -47,6 +46,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index cb1ebeb..ce31db1 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -40,6 +40,8 @@
#include <video/platform_lcd.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 0539452..2804526 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -24,13 +24,13 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
#include "mach-smartq.h"
static struct gpio_led smartq5_leds[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index a58d1ba..a0f9d1a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -24,13 +24,13 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
#include "mach-smartq.h"
static struct gpio_led smartq7_leds[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index be28a59..57a7eaa 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -32,12 +32,13 @@
#include <plat/regs-serial.h>
-#include <plat/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 0830915..cba6714 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -64,7 +64,6 @@
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -74,6 +73,8 @@
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include "common.h"
+
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 7a3bc32..3336658 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -38,7 +38,8 @@
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
+
+#include "common.h"
void __init s3c6400_map_io(void)
{
@@ -60,7 +61,7 @@ void __init s3c6400_map_io(void)
void __init s3c6400_init_clocks(int xtal)
{
s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
- s3c6400_setup_clocks();
+ s3c64xx_setup_clocks();
}
void __init s3c6400_init_irq(void)
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 4117003..fba71bd 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -41,8 +41,8 @@
#include <plat/adc-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+
+#include "common.h"
void __init s3c6410_map_io(void)
{
@@ -66,7 +66,7 @@ void __init s3c6410_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
- s3c6400_setup_clocks();
+ s3c64xx_setup_clocks();
}
void __init s3c6410_init_irq(void)
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 40fd7b6..abbdadb 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -152,11 +152,9 @@ extern void s3c_init_cpu(unsigned long idcode,
/* core initialisation functions */
extern void s3c24xx_init_irq(void);
-extern void s3c64xx_init_irq(u32 vic0, u32 vic1);
extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-extern void s3c64xx_init_io(struct map_desc *mach_desc, int size);
extern void s5p_init_io(struct map_desc *mach_desc,
int size, void __iomem *cpuid_addr);
@@ -183,7 +181,6 @@ extern struct syscore_ops s3c2410_pm_syscore_ops;
extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
extern struct syscore_ops s3c244x_pm_syscore_ops;
-extern struct syscore_ops s3c64xx_irq_syscore_ops;
/* system device classes */
@@ -195,7 +192,6 @@ extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
extern struct sysdev_class s3c2443_sysclass;
extern struct sysdev_class s3c6410_sysclass;
-extern struct sysdev_class s3c64xx_sysclass;
extern struct sysdev_class s5p64x0_sysclass;
extern struct sysdev_class s5pv210_sysclass;
extern struct sysdev_class exynos4_sysclass;
diff --git a/arch/arm/plat-samsung/include/plat/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h
deleted file mode 100644
index 37d428a..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c6400.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben at simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6400 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S3C6400 related SoCs */
-
-extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_setup_clocks(void);
-
-extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-
-#ifdef CONFIG_CPU_S3C6400
-
-extern int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
-
-#define s3c6400_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6400_init_clocks NULL
-#define s3c6400_init_uarts NULL
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
diff --git a/arch/arm/plat-samsung/include/plat/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h
deleted file mode 100644
index 20a6675..0000000
--- a/arch/arm/plat-samsung/include/plat/s3c6410.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben at simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * Header file for s3c6410 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C6410
-
-extern int s3c6410_init(void);
-extern void s3c6410_init_irq(void);
-extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
-
-#define s3c6410_init_uarts s3c6400_common_init_uarts
-
-#else
-#define s3c6410_init_clocks NULL
-#define s3c6410_init_uarts NULL
-#define s3c6410_map_io NULL
-#define s3c6410_init NULL
-#endif
--
1.7.4.4
More information about the linux-arm-kernel
mailing list