[PATCH 1/1] net/fec: add KSZ9021RN phy fixup

Richard Zhao richard.zhao at linaro.org
Mon Dec 12 05:09:18 EST 2011


For imx6q sabrelite board, set phy RGMII pad skew.

Signed-off-by: Richard Zhao <richard.zhao at linaro.org>
---
 drivers/net/ethernet/freescale/fec.c |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 112af9b..d3b4463 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -1513,6 +1513,21 @@ static inline void fec_reset_phy(struct platform_device *pdev)
 }
 #endif /* CONFIG_OF */
 
+/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
+static int ksz9021rn_phy_fixup(struct phy_device *phydev)
+{
+	/* min rx data delay */
+	phy_write(phydev, 0x0b, 0x8105);
+	phy_write(phydev, 0x0c, 0x0000);
+
+	/* max rx/tx clock delay, min rx/tx control delay */
+	phy_write(phydev, 0x0b, 0x8104);
+	phy_write(phydev, 0x0c, 0xf0f0);
+	phy_write(phydev, 0x0b, 0x104);
+
+	return 0;
+}
+
 static int __devinit
 fec_probe(struct platform_device *pdev)
 {
@@ -1597,6 +1612,10 @@ fec_probe(struct platform_device *pdev)
 	if (ret)
 		goto failed_init;
 
+	/* register the PHY board fixup (for Micrel KSZ9021RN) */
+	phy_register_fixup_for_uid(0x00221611, 0xfffffff0,
+					 ksz9021rn_phy_fixup);
+
 	ret = fec_enet_mii_init(pdev);
 	if (ret)
 		goto failed_mii_init;
-- 
1.7.5.4





More information about the linux-arm-kernel mailing list