[PATCH v2 4/4] arm/imx: add mc13892 support into imx51-babbage.dts
Shawn Guo
shawn.guo at linaro.org
Thu Dec 1 04:21:08 EST 2011
It adds mc13892 support into imx51-babbage device tree source.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
---
arch/arm/boot/dts/imx51-babbage.dts | 103 ++++++++++++++++++++++++++++++++++-
1 files changed, 101 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index f8766af..407fc0b 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -31,12 +31,14 @@
esdhc at 70004000 { /* ESDHC1 */
fsl,cd-internal;
fsl,wp-internal;
+ vmmc-supply = <&vsd_reg>;
status = "okay";
};
esdhc at 70008000 { /* ESDHC2 */
cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+ vmmc-supply = <&vsd_reg>;
status = "okay";
};
@@ -57,8 +59,105 @@
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
- mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
- fsl,mc13xxx-uses-regulator;
+ interrupt-parent = <&gpio0>;
+ interrupts = <8>;
+
+ regulators {
+ sw1_reg: mc13892__sw1 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: mc13892__sw2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: mc13892__sw3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: mc13892__sw4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ viohi_reg: mc13892__viohi {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: mc13892__vpll {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdig_reg: mc13892__vdig {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ };
+
+ vsd_reg: mc13892__vsd {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ vusb2_reg: mc13892__vusb2 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vvideo_reg: mc13892__vvideo {
+ regulator-min-microvolt = <2775000>;
+ regulator-max-microvolt = <2775000>;
+ };
+
+ vaudio_reg: mc13892__vaudio {
+ regulator-min-microvolt = <2300000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vcam_reg: mc13892__vcam {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vgen1_reg: mc13892__vgen1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vgen2_reg: mc13892__vgen2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: mc13892__vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-always-on;
+ };
+
+ vusb_reg: mc13892__vusb {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
};
flash: at45db321d at 1 {
--
1.7.4.1
More information about the linux-arm-kernel
mailing list