[PATCH] OMAP3: hwmod_data: add HWMOD_INIT_NO_RESET flag for dss_dispc

[Ilya Yanok]

Hi Tomi,

On 22.12.2011 14:13, Tomi Valkeinen wrote:
> On Thu, 2011-12-22 at 02:00 +0100, Ilya Yanok wrote:
>> Resetting DISPC when a DISPC output is enabled causes the DSS to go into
>> an inconsistent state.
>>
>> commit b923d40dd4211c4ef7d4efa2bd81b7ca1d8744c1
>> Author: Archit Taneja <archit at ti.com>
>> Date:   Thu Oct 6 18:04:08 2011 -0600
>>
>>     ARM: OMAP2PLUS: DSS: Ensure DSS works correctly if display is
>> enabled in bootloader
>>
>> tries to deal with this problem by checking if display is enabled and
>> disabling it before doing reset.
>>
>> But in my setup dss_dispc is resetted from omap_hwmod_setup_all function
>> _before_ calling omap_dss_reset. So when dispc_disable_outputs is
>> executed dispc is already reset and nothing happens.
> 
> Hmm, why is that? You don't have the dss hwmod before dispc in the list
> of hwmods? The code presumes that dss hwmod is handled first.

Looking at the arch/arm/mach-omap2/omap_hwmod_3xxx_data.c I can see that
dss_dispc is in the list of generic hwmods which is registered first
while dss_core hwmod is in revision-specific lists which are registered
later. I think this is the real root of the problem, thanks for pointing
this out!

> 
>> This patch and HWMOD_INIT_NO_RESET flags to dss_dispc hwmod thus leaving
>> DISPC untouched so that omap_dss_reset can take care of it.
> 
> omap_dss_reset() doesn't reset dispc, so this will leave dispc
> un-reseted.
> 
> The idea of the current code is to do the reset similarly on all OMAPs.
> The sequence should be:
> 
> - omap_dss_reset(), which disables dispc outputs and manually resets dss
> registers.
> - then the rest of the dss modules reset themselves normally, using the
> softreset bit.

But currently omap_dss_reset() is called the last.

Regards, Ilya.