[PATCH 06/12] mtd: gpmi-lib: convert to clk_prepare/clk_unprepare

[Marek Vasut]

> The patch converts gpmi nand driver to clk_prepare/clk_unprepare by
> using helper functions clk_prepare_enable/clk_disable_unprepare.
> 
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> Cc: Huang Shijie <b32955 at freescale.com>
> Cc: Artem Bityutskiy <artem.bityutskiy at intel.com>
> ---
>  drivers/mtd/nand/gpmi-nand/gpmi-lib.c |   12 ++++++------
>  1 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index de4db76..2a56fc6 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -126,7 +126,7 @@ int gpmi_init(struct gpmi_nand_data *this)
>  	struct resources *r = &this->resources;
>  	int ret;
> 
> -	ret = clk_enable(r->clock);
> +	ret = clk_prepare_enable(r->clock);
>  	if (ret)
>  		goto err_out;
>  	ret = gpmi_reset_block(r->gpmi_regs, false);
> @@ -146,7 +146,7 @@ int gpmi_init(struct gpmi_nand_data *this)
>  	/* Select BCH ECC. */
>  	writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
> 
> -	clk_disable(r->clock);
> +	clk_disable_unprepare(r->clock);
>  	return 0;
>  err_out:
>  	return ret;
> @@ -202,7 +202,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
>  	ecc_strength  = bch_geo->ecc_strength >> 1;
>  	page_size     = bch_geo->page_size;
> 
> -	ret = clk_enable(r->clock);
> +	ret = clk_prepare_enable(r->clock);
>  	if (ret)
>  		goto err_out;
> 
> @@ -229,7 +229,7 @@ int bch_set_geometry(struct gpmi_nand_data *this)
>  	writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
>  				r->bch_regs + HW_BCH_CTRL_SET);
> 
> -	clk_disable(r->clock);
> +	clk_disable_unprepare(r->clock);
>  	return 0;
>  err_out:
>  	return ret;
> @@ -704,7 +704,7 @@ void gpmi_begin(struct gpmi_nand_data *this)
>  	int ret;
> 
>  	/* Enable the clock. */
> -	ret = clk_enable(r->clock);
> +	ret = clk_prepare_enable(r->clock);
>  	if (ret) {
>  		pr_err("We failed in enable the clk\n");
>  		goto err_out;
> @@ -773,7 +773,7 @@ err_out:
>  void gpmi_end(struct gpmi_nand_data *this)
>  {
>  	struct resources *r = &this->resources;
> -	clk_disable(r->clock);
> +	clk_disable_unprepare(r->clock);
>  }
> 
>  /* Clears a BCH interrupt. */

Yes, this is still all very easy conversion :)

Acked-by: Marek Vasut <marek.vasut at gmail.com>