September 2013 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Sep 1 02:42:16 EDT 2013
Ending: Mon Sep 30 23:48:35 EDT 2013
Messages: 5237

• [patch 1/1] imx51.dtsi: fix PATA device clock   Arnaud Patard (Rtp)
• device tree binding documentation outdated   Arnaud Patard (Rtp)
• [PATCH v4 1/2] video: ARM CLCD: Add DT support   Jon Medhurst (Tixy)
• imprecise external abort using the flexcan driver on i.MX6Q   =?utf-8?Q?Lothar_Wa=C3=9Fmann?=
• [PATCH v2] ARM: pxa: sharpsl_param.c: fix invalid memory access   Andrea Adami
• [PATCH v2] ARM: sa1100: collie.c: fall back to jedec_probe flash detection   Andrea Adami
• problem booting linux with qemu-system-arm -M spitz   Andrea Adami
• [PATCH v3] ARM: pxa: sharpsl_param.c: fix invalid memory access   Andrea Adami
• [PATCH v4] sharpsl_param.c: ARM: pxa: fix invalid memory access   Andrea Adami
• [Query] Stack Overflow in "arch/arm/kernel/unwind.c" while unwinding frame   Anurag Aggarwal
• [Patch v3 2/3] ARM: dts: Document the CCI PMU DT bindings   Punit Agrawal
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   David Ahern
• [PATCH 0/8] mmc: sdhci-esdhc-imx: add SD3.0 support   Dong Aisheng
• [PATCH 1/8] mmc: sdhci: add hooks for platform specific tuning   Dong Aisheng
• [PATCH 2/8] mmc: sdhci: allow platform access of sdhci_send_command   Dong Aisheng
• [PATCH 3/8] sdhci: sdhci-esdhc-imx: support real clock on and off for imx6q   Dong Aisheng
• [PATCH 4/8] sdhci: sdhci-esdhci-imx: add sd3.0 clock tuning support   Dong Aisheng
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Dong Aisheng
• [PATCH 6/8] mmc: sdhci-esdhc: correct pre_div for imx6q   Dong Aisheng
• [PATCH 7/8] mmc: sdhci-esdhc: set actual_clock in clock setting   Dong Aisheng
• [PATCH 8/8] ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3   Dong Aisheng
• [PATCH 1/8] mmc: sdhci: add hooks for platform specific tuning   Dong Aisheng
• [PATCH 3/8] sdhci: sdhci-esdhc-imx: support real clock on and off for imx6q   Dong Aisheng
• [PATCH 4/8] sdhci: sdhci-esdhci-imx: add sd3.0 clock tuning support   Dong Aisheng
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Dong Aisheng
• [PATCH 8/8] ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3   Dong Aisheng
• [PATCH 8/8] ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3   Dong Aisheng
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Dong Aisheng
• [PATCH 4/8] sdhci: sdhci-esdhci-imx: add sd3.0 clock tuning support   Dong Aisheng
• [PATCH 0/8] mmc: sdhci-esdhc-imx: add SD3.0 support   Dong Aisheng
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Dong Aisheng
• [PATCH v2 0/9] mmc: sdhci-esdhc-imx: add SD3.0 support   Dong Aisheng
• [PATCH v2 1/9] mmc: sdhci: add hooks for platform specific tuning   Dong Aisheng
• [PATCH v2 2/9] mmc: sdhci: allow platform access of sdhci_send_command   Dong Aisheng
• [PATCH v2 3/9] mmc: sdhci-esdhci: move common esdhc_set_clock to platform driver   Dong Aisheng
• [PATCH v2 4/9] sdhci: sdhci-esdhc-imx: support real clock on and off for imx6q   Dong Aisheng
• [PATCH v2 5/9] sdhci: sdhci-esdhci-imx: add sd3.0 clock tuning support   Dong Aisheng
• [PATCH v2 6/9] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Dong Aisheng
• [PATCH v2 7/9] mmc: sdhci-esdhc-imx: correct pre_div for imx6q   Dong Aisheng
• [PATCH v2 8/9] mmc: sdhci-esdhc-imx: set actual_clock in clock setting   Dong Aisheng
• [PATCH v2 9/9] ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3   Dong Aisheng
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Dong Aisheng
• [PATCH 1/1] mmc: sdhci-of-esdhc: fix building error   Dong Aisheng
• [PATCH v3 2/5] ARM: bcm4760: Add platform infrastructure   Domenico Andreoli
• [PATCH v4 0/4] ARM: Broadcom BCM4760 support   Domenico Andreoli
• [PATCH v4 1/4] ARM: bcm4760: Add platform infrastructure   Domenico Andreoli
• [PATCH v4 2/4] ARM: bcm4760: Add system timer   Domenico Andreoli
• [PATCH v4 3/4] ARM: bcm4760: Add ripple counter   Domenico Andreoli
• [PATCH v4 4/4] ARM: bcm4760: Add restart hook   Domenico Andreoli
• [PATCH v4 4/4] ARM: bcm4760: Add restart hook   Domenico Andreoli
• [PATCH v4 4/4] ARM: bcm4760: Add restart hook   Domenico Andreoli
• [PATCH v4 4/4] ARM: bcm4760: Add restart hook   Domenico Andreoli
• [PATCHv3 7/8] mailbox/omap: add code to support the wkupm3 operations   Suman Anna
• [PATCHv3 7/8] mailbox/omap: add code to support the wkupm3 operations   Suman Anna
• [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices   Suman Anna
• [PATCH] irq: bcm2835: Re-implement the hardware IRQ handler.   Simon Arlott
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20; Add phy cnt arch timer for ARMv7 support.   Arokux
• [PATCHv3] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Jonathan Austin
• [PATCHv3] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Jonathan Austin
• [PATCH 0/3] KVM: ARM: Cortex-A7 support and fixes   Jonathan Austin
• [PATCH 1/3] KVM: ARM: fix the size of TTBCR_{T0SZ,T1SZ} masks   Jonathan Austin
• [PATCH 2/3] KVM: ARM: Fix calculation of virtual CPU ID   Jonathan Austin
• [PATCH 3/3] KVM: ARM: Add support for Cortex-A7   Jonathan Austin
• [PATCH 3/3] KVM: ARM: Add support for Cortex-A7   Jonathan Austin
• [RFC PATCH 0/4] pinctrl: at91: various fixes   Boris BREZILLON
• [RFC PATCH 1/4] pinctrl: at91: fix typos   Boris BREZILLON
• [RFC PATCH 2/4] pinctrl: at91: fix sam9x5 debounce/deglitch functions   Boris BREZILLON
• [RFC PATCH 3/4] pinctrl: at91: improve pinconf_set/get function robustness   Boris BREZILLON
• [RFC PATCH 4/4] pinctrl: at91: check for debounce time conflicts   Boris BREZILLON
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   Boris BREZILLON
• [PATCH 0/2] pwm: atmel-tcb: config fixes   Boris BREZILLON
• [PATCH 1/2] pwm: atmel-tcb: add missing clk source config   Boris BREZILLON
• [PATCH 2/2] pwm: atmel-tcb: fix max time computation for slow clk source   Boris BREZILLON
• [PATCH v2 04/10] irqdomain: Return errors from irq_create_of_mapping()   Ralf Baechle
• [PATCH v2 07/10] of/irq: Propagate errors in of_irq_to_resource_table()   Ralf Baechle
• [PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Felipe Balbi
• [PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Felipe Balbi
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Felipe Balbi
• [PATCH v11 0/8] PHY framework   Felipe Balbi
• [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY   Felipe Balbi
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Felipe Balbi
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Felipe Balbi
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Felipe Balbi
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Felipe Balbi
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Felipe Balbi
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Felipe Balbi
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Felipe Balbi
• [PATCH 36/51] DMA-API: usb: use dma_set_coherent_mask()   Felipe Balbi
• [PATCH 37/51] DMA-API: usb: use new dma_coerce_mask_and_coherent()   Felipe Balbi
• [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks   Felipe Balbi
• [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks   Felipe Balbi
• [PATCH v2 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data   Felipe Balbi
• [PATCH] ARM: dts: am335x-boneblack: move fixed regulator to board level   Felipe Balbi
• [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor   Felipe Balbi
• [PATCH v2 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data   Felipe Balbi
• [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor   Felipe Balbi
• [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd   Felipe Balbi
• [PATCH v6 7/8] ARM: dts: omap4: update omap-control-usb nodes   Felipe Balbi
• [PATCH v6 8/8] ARM: dts: omap5: update omap-control-usb node   Felipe Balbi
• [PATCH 30/41] usb: musb: ux500: Don't supply a con_id when requesting the clock   Felipe Balbi
• [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD   Felipe Balbi
• [PATCH] ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> format   Chris Ball
• [PATCH] mmc: atmel-mci: abort transfer on timeout error   Chris Ball
• [PATCH 1/3] arm: socfpga: Set the SDMMC clock phase in system manager   Chris Ball
• [PATCH v2 0/9] mmc: sdhci-esdhc-imx: add SD3.0 support   Chris Ball
• [PATCH v2 0/9] mmc: sdhci-esdhc-imx: add SD3.0 support   Chris Ball
• [PATCH 1/1] mmc: sdhci-of-esdhc: fix building error   Chris Ball
• [RFC] ARM: kernel: io: Optimize memcpy_fromio function.   Dirk Behme
• [PATCH] ARM: imx: i.mx6d/q: disable the double linefill feature of PL310   Dirk Behme
• [PATCH 1/5] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC   Juergen Beisert
• [PATCH 2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Juergen Beisert
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Juergen Beisert
• [PATCH 4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Juergen Beisert
• [PATCH 5/5] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation   Juergen Beisert
• [RFCv2] staging/iio/adc: change the MXS touchscreen driver implementation   Juergen Beisert
• [PATCH 1/5] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC   Juergen Beisert
• [PATCH 2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Juergen Beisert
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Juergen Beisert
• [PATCH 4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Juergen Beisert
• [PATCH 5/5] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation   Juergen Beisert
• [RFCv3] staging/iio/adc: change the MXS touchscreen driver implementation   Juergen Beisert
• [PATCH 1/5] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC   Juergen Beisert
• [PATCH 2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Juergen Beisert
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Juergen Beisert
• [PATCH 4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Juergen Beisert
• [PATCH 5/5] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation   Juergen Beisert
• [RFCv4] staging/iio/adc: change the MXS touchscreen driver implementation   Juergen Beisert
• [PATCH 1/6] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC   Juergen Beisert
• [PATCH 2/6] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Juergen Beisert
• [PATCH 3/6] Staging/iio/adc/touchscreen/MXS: simplify register access   Juergen Beisert
• [PATCH 4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver   Juergen Beisert
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Juergen Beisert
• [PATCH 6/6] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation   Juergen Beisert
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Juergen Beisert
• [PATCH 1/7] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC   Juergen Beisert
• [PATCH 2/7] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Juergen Beisert
• [PATCH 3/7] Staging/iio/adc/touchscreen/MXS: simplify register access   Juergen Beisert
• [PATCH 4/7] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver   Juergen Beisert
• [PATCH 5/7] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Juergen Beisert
• [PATCH 6/7] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation   Juergen Beisert
• [PATCH 7/7] Staging/iio/adc/touchscreen/MXS: provide devicetree adaption   Juergen Beisert
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Juergen Beisert
• [PATCH 1/9] Staging/iio/adc/touchscreen/MXS: add proper clock handling   Juergen Beisert
• [PATCH 2/9] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC   Juergen Beisert
• [PATCH 3/9] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Juergen Beisert
• [PATCH 4/9] Staging/iio/adc/touchscreen/MXS: simplify register access   Juergen Beisert
• [PATCH 5/9] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver   Juergen Beisert
• [PATCH 6/9] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Juergen Beisert
• [PATCH 7/9] Staging/iio/adc/touchscreen/MXS: remove old touchscreen detection implementation   Juergen Beisert
• [PATCH 8/9] Staging/iio/adc/touchscreen/MXS: provide devicetree adaption   Juergen Beisert
• [PATCH 9/9] Staging/iio: add TODO reminder   Juergen Beisert
• [PATCH 5/5] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation   Jürgen Beisert
• [PATCH 2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Jürgen Beisert
• [PATCH 2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Jürgen Beisert
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Jürgen Beisert
• [patch] iio: mxs-lradc: use helper functions to simplify the code   Jürgen Beisert
• [PATCH 4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jürgen Beisert
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Jürgen Beisert
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Jürgen Beisert
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Jürgen Beisert
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Jürgen Beisert
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jürgen Beisert
• [PATCH 4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver   Jürgen Beisert
• [PATCH 3/6] Staging/iio/adc/touchscreen/MXS: simplify register access   Jürgen Beisert
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jürgen Beisert
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jürgen Beisert
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jürgen Beisert
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jürgen Beisert
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jürgen Beisert
• [PATCH 7/7] Staging/iio/adc/touchscreen/MXS: provide devicetree adaption   Jürgen Beisert
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Jürgen Beisert
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Jürgen Beisert
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Jürgen Beisert
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Jürgen Beisert
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Jürgen Beisert
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Jürgen Beisert
• [PATCH 1/9] Staging/iio/adc/touchscreen/MXS: add proper clock handling   Jürgen Beisert
• [PATCH 1/9] Staging/iio/adc/touchscreen/MXS: add proper clock handling   Jürgen Beisert
• ARM/Samsung/S3C24xx: Linux-3.11 crashes when using PWM   Jürgen Beisert
• ARM/Samsung/S3C24xx: Linux-3.11 crashes when using PWM   Jürgen Beisert
• [PATCH] ARM: at91: sama5d: add the PWM clock   Alexandre Belloni
• [PATCH v4] PWM: atmel-pwm: add PWM controller driver   Alexandre Belloni
• [PATCH v4] PWM: atmel-pwm: add PWM controller driver   Alexandre Belloni
• [PATCH] PWM: atmel-pwm: use request/free instead of enable/disable   Alexandre Belloni
• [PATCH] PWM: atmel-pwm: use request/free instead of enable/disable   Alexandre Belloni
• [PATCH v4] PWM: atmel-pwm: add PWM controller driver   Alexandre Belloni
• [PATCH v2] PWM: atmel-pwm: use request/free instead of enable/disable   Alexandre Belloni
• [PATCH v5] PWM: atmel-pwm: add PWM controller driver   Alexandre Belloni
• [PATCH] ARM: l2x0: protect outer_cache_fns.sync pointer assignment with OUTER_CACHE_SYNC   Eran Ben-Avi
• [PATCH] ARM: l2x0: protect outer_cache_fns.sync pointer assignment with OUTER_CACHE_SYNC   Eran Ben-Avi
• [PATCH RFC v2 01/16] ARM: call clk_of_init from time_init   Arnd Bergmann
• [PATCH 3/7] misc: ixp4-beeper: use gpiolib strictly   Arnd Bergmann
• [PATCH 2/7] misc: ixp4-beeper: switch to use gpiolib   Arnd Bergmann
• [PATCH v4 1/4] ARM: bcm4760: Add platform infrastructure   Arnd Bergmann
• [PATCH v4 4/4] ARM: bcm4760: Add restart hook   Arnd Bergmann
• [PATCH 0/6] deletion of the Shark machine   Arnd Bergmann
• [PATCH 1/2] ARM: msm: trout: fix 'pointer from integer' warnings   Arnd Bergmann
• [PATCH v4 4/4] ARM: bcm4760: Add restart hook   Arnd Bergmann
• [PATCH v4 4/4] ARM: bcm4760: Add restart hook   Arnd Bergmann
• [PATCH v4 4/4] ARM: bcm4760: Add restart hook   Arnd Bergmann
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Arnd Bergmann
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Arnd Bergmann
• [PATCH v6 RESEND 0/5] ARM/ARM64 architected timer updates   Arnd Bergmann
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Arnd Bergmann
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Arnd Bergmann
• [PATCH 3/3] [RFC] ARM: prepare ARMv7-M for MULTIPLATFORM use   Arnd Bergmann
• [PATCH v2] arm64: add support for kernel mode NEON   Ard Biesheuvel
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Ard Biesheuvel
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Ard Biesheuvel
• [PATCH 1/3] ARM: perf: add support for perf regs API   Ard Biesheuvel
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Ard Biesheuvel
• crypto/xor.ko fails to build with CONFIG_KERNEL_MODE_NEON=y   Ard Biesheuvel
• [PATCH] ARM: fix modular build of xor_blocks() with NEON enabled   Ard Biesheuvel
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Ard Biesheuvel
• [PATCH] ARM: fix modular build of xor_blocks() with NEON enabled   Ard Biesheuvel
• [RFC PATCH 0/2] AES in CBC/CTR/XTS modes using ARMv8 Crypto Extensions   Ard Biesheuvel
• [RFC PATCH 1/2] crypto: move ablk_helper out of arch/x86   Ard Biesheuvel
• [RFC PATCH 2/2] arm64: add support for AES using ARMv8 Crypto Extensions   Ard Biesheuvel
• [PATCH] ARM: fix Thumb-2 bug in AES assembler code   Ard Biesheuvel
• [PATCH] ARM: fix Thumb-2 bug in AES assembler code   Ard Biesheuvel
• [PATCH v2] ARM: fix Thumb-2 bug in AES assembler code   Ard Biesheuvel
• [PATCH v2] ARM: fix Thumb-2 bug in AES assembler code   Ard Biesheuvel
• [PATCH 0/4] ARM: NEON based fast(er) AES in CBC/CTR/XTS modes   Ard Biesheuvel
• [PATCH 1/4] crypto: create generic version of ablk_helper   Ard Biesheuvel
• [PATCH 2/4] ARM: pull in <asm/simd.h> from asm-generic   Ard Biesheuvel
• [PATCH 3/4] ARM: move AES typedefs and function prototypes to separate header   Ard Biesheuvel
• [PATCH 4/4] ARM: add support for bit sliced AES using NEON instructions   Ard Biesheuvel
• [PATCH v3 0/5] kernel mode NEON support   Ard Biesheuvel
• [PATCH] ARM: drop <asm/types.h> from generic-y   Ard Biesheuvel
• [PATCH 4/4] ARM: add support for bit sliced AES using NEON instructions   Ard Biesheuvel
• [ARM attend] Any news on agenda? Device tree documentation discussion   Bird, Tim
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Tim Bird
• Status of ARM FIQ?   Bird, Tim
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Maxime Bizon
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Maxime Bizon
• About atags_proc buffer size   Vojtech Bocek
• About atags_proc buffer size   Vojtech Bocek
• About atags_proc buffer size   Vojtech Bocek
• [GIT PULL] KVM/ARM Fixes for 3.12-rc2   Paolo Bonzini
• [PATCHv2 2/2] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974   Stephen Boyd
• [PATCH] ARM: msm: Remove irqs-*.h files for DT based targets   Stephen Boyd
• [PATCH] ARM: msm: Remove irqs-*.h files for DT based targets   Stephen Boyd
• [GIT PULL] Barrier updates for 3.12   Stephen Boyd
• [PATCH 2/2] ARM: msm: Create a common board-dt and config ARCH_MSM_DT   Stephen Boyd
• [PATCHv2 2/2] ARM: msm: Create a common board-dt and config ARCH_MSM_DT   Stephen Boyd
• [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP   Stephen Boyd
• [PATCH V3 1/6] clk: exynos-audss: convert to platform device   Stephen Boyd
• [PATCH 2/5] clocksource: Add Allwinner SoCs HS timers driver   Stephen Boyd
• [PATCH] clocksource: arm_arch_timer: Use clocksource for suspend timekeeping   Stephen Boyd
• ARM: OMAP2: Make MACH_OMAP3EVM select NOP_USB_XCEIV   Josh Boyer
• 3.12 merge window exynos cpufreq driver fails to build   Josh Boyer
• 3.12 merge window exynos cpufreq driver fails to build   Josh Boyer
• crypto/xor.ko fails to build with CONFIG_KERNEL_MODE_NEON=y   Josh Boyer
• [PATCH] ARM: fix modular build of xor_blocks() with NEON enabled   Josh Boyer
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Jassi Brar
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Jassi Brar
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Jassi Brar
• [RFC PATCH 1/3] Enable BCM2835 mailbox support   Jassi Brar
• [RFC 0/4] Add basic support for ASV   Yadwinder Singh Brar
• [PATCH 2/3] clk: samsung: Add clock driver for s5pc100   Yadwinder Singh Brar
• [PATCH 2/3] clk: samsung: Add clock driver for s5pc100   Yadwinder Singh Brar
• [PATCH 1/6] clk: exynos-audss: convert to platform device   Andrew Bresticker
• [PATCH 2/6] clk: exynos-audss: allow input clocks to be specified in device tree   Andrew Bresticker
• [PATCH 3/6] clk: exynos5250: add clock ID for div_pcm0   Andrew Bresticker
• [PATCH 4/6] ARM: dts: exynos5250: add sclk_pcm_in to audss clock controller   Andrew Bresticker
• [PATCH 5/6] clk: exynos-audss: add support for Exynos 5420   Andrew Bresticker
• [PATCH 6/6] ARM: dts: exynos5420: add sclk_pcm_in to audss clock controller   Andrew Bresticker
• [PATCH 1/6] clk: exynos-audss: convert to platform device   Andrew Bresticker
• [PATCH 1/6] clk: exynos-audss: convert to platform device   Andrew Bresticker
• [PATCH V2 1/6] clk: exynos-audss: convert to platform device   Andrew Bresticker
• [PATCH V2 2/6] clk: exynos-audss: allow input clocks to be specified in device tree   Andrew Bresticker
• [PATCH V2 3/6] clk: exynos5250: add clock ID for div_pcm0   Andrew Bresticker
• [PATCH V2 4/6] ARM: dts: exynos5250: add input clocks to audss clock controller   Andrew Bresticker
• [PATCH V2 5/6] clk: exynos-audss: add support for Exynos 5420   Andrew Bresticker
• [PATCH V2 6/6] ARM: dts: exynos5420: add input clocks to audss clock controller   Andrew Bresticker
• [PATCH V3 1/6] clk: exynos-audss: convert to platform device   Andrew Bresticker
• [PATCH V3 2/6] clk: exynos-audss: allow input clocks to be specified in device tree   Andrew Bresticker
• [PATCH V3 3/6] clk: exynos5250: add clock ID for div_pcm0   Andrew Bresticker
• [PATCH V3 4/6] ARM: dts: exynos5250: add input clocks to audss clock controller   Andrew Bresticker
• [PATCH V3 5/6] clk: exynos-audss: add support for Exynos 5420   Andrew Bresticker
• [PATCH V3 6/6] ARM: dts: exynos5420: add input clocks to audss clock controller   Andrew Bresticker
• [PATCH V3 1/6] clk: exynos-audss: convert to platform device   Andrew Bresticker
• [PATCH V4 1/6] clk: exynos-audss: convert to platform device   Andrew Bresticker
• [PATCH V4 2/6] clk: exynos-audss: allow input clocks to be specified in device tree   Andrew Bresticker
• [PATCH V4 3/6] clk: exynos5250: add clock ID for div_pcm0   Andrew Bresticker
• [PATCH V4 4/6] ARM: dts: exynos5250: add input clocks to audss clock controller   Andrew Bresticker
• [PATCH V4 5/6] clk: exynos-audss: add support for Exynos 5420   Andrew Bresticker
• [PATCH V4 6/6] ARM: dts: exynos5420: add input clocks to audss clock controller   Andrew Bresticker
• [PATCH 0/2] arm: zynq: Enable global timer   Soren Brinkmann
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Soren Brinkmann
• [PATCH 2/2] arm: zynq: Enable arm_global_timer   Soren Brinkmann
• [PATCH] SI570 clock driver   Soren Brinkmann
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Soren Brinkmann
• [PATCH v2 0/4] arm: zynq: Enable global timer   Soren Brinkmann
• [PATCH v2 1/4] clockchips: Add FEAT_PERCPU clockevent flag   Soren Brinkmann
• [PATCH v2 2/4] clocksource/arm_global_timer: Set FEAT_PERCPU flag   Soren Brinkmann
• [PATCH v2 3/4] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Soren Brinkmann
• [PATCH v2 4/4] arm: zynq: Enable arm_global_timer   Soren Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Soren Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Soren Brinkmann
• [PATCH v3] clk: si570: Add a driver for SI570 oscillators   Soren Brinkmann
• [PATCH v4] clk: si570: Add a driver for SI570 oscillators   Soren Brinkmann
• [PATCH v5] clk: si570: Add a driver for SI570 oscillators   Soren Brinkmann
• [PATCH RFC v2 01/16] ARM: call clk_of_init from time_init   Sören Brinkmann
• [PATCH RFC v2 01/16] ARM: call clk_of_init from time_init   Sören Brinkmann
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Sören Brinkmann
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Sören Brinkmann
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Sören Brinkmann
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Sören Brinkmann
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH 2/2] arm: zynq: Enable arm_global_timer   Sören Brinkmann
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v3] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v4] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v4] clk: si570: Add a driver for SI570 oscillators   Sören Brinkmann
• [PATCH v2 0/4] arm: zynq: Enable global timer   Sören Brinkmann
• [PATCH 1/2] ARM: zynq: cpuidle: Remove useless compatibility string   Sören Brinkmann
• [PATCH 1/2] ARM: zynq: cpuidle: Remove useless compatibility string   Sören Brinkmann
• problem booting linux with qemu-system-arm -M spitz   Waldemar Brodkorb
• problem booting linux with qemu-system-arm -M spitz   Waldemar Brodkorb
• [PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard   David Brown
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   David Brown
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   David Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [PATCH 08/14] ASoC: kirkwood: prefer external clock over internal clock   Mark Brown
• [PATCH 09/14] ASoC: kirkwood-dma: remove IEC958_SUBFRAME formats   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [PATCH 13/14] ASoC: kirkwood: add SPDIF output support   Mark Brown
• [PATCH 13/14] ASoC: kirkwood: add SPDIF output support   Mark Brown
• [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support   Mark Brown
• [alsa-devel] [PATCH 2/3] ASoC: generic simple sound card DT bindings   Mark Brown
• [PATCH] ASoC: atmel: disable error interrupt   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• Clock framework deadlock with external SPI clockchip   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH 11/11] iio: pressure-core: st: Provide correct regulator support   Mark Brown
• [PATCH 11/11] iio: pressure-core: st: Provide correct regulator support   Mark Brown
• [PATCH 13/14] ASoC: kirkwood: add SPDIF output support   Mark Brown
• [alsa-devel] [PATCH 00/14] SPDIF support   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH] ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver   Mark Brown
• [PATCH] ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH RFC v2 2/5] spmi: Linux driver framework for SPMI   Mark Brown
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 5/8] spi: Add Freescale QuadSpi driver   Mark Brown
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v3 5/8] spi: Add Freescale QuadSpi driver   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Mark Brown
• [PATCH v2 7/9] ASoC: codecs: convert existing I2C client drivers to use I2C core runtime PM   Mark Brown
• [PATCH v2 8/9] spi: prepare runtime PM support for SPI devices   Mark Brown
• [PATCH v2 9/9] spi: attach/detach SPI device to the ACPI power domain   Mark Brown
• [PATCH v2 0/9] runtime PM support for I2C and SPI client devices   Mark Brown
• [PATCH v2 8/9] spi: prepare runtime PM support for SPI devices   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Mark Brown
• [PATCH] ASoC: generic: Add generic DT based simple codec   Mark Brown
• [PATCH] ASoC: kirkwood: fix loss of external clock at probe time   Mark Brown
• [PATCH] ASoC: generic: Add generic DT based simple codec   Mark Brown
• [PATCH] ASoC: generic: Add generic DT based simple codec   Mark Brown
• [PATCH 28/51] DMA-API: sound: fix dma mask handling in a lot of drivers   Mark Brown
• [PATCH v2 2/2] ASoC: kirkwood: fix loss of external clock at probe time   Mark Brown
• [PATCH] spi: s3c64xx: Add missing compatibles   Mark Brown
• [PATCH] ASoC: generic: Add generic DT based simple codec   Mark Brown
• [alsa-devel] "ASoC: ab8500: Convert register I/O to regmap" breaks snowball   Mark Brown
• [PATCH] ASoC: kirkwood: add S/PDIF support   Mark Brown
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Mark Brown
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Mark Brown
• [PATCH] ASoc: kirkwood: Extend the min and max number of bytes per period   Mark Brown
• [PATCH] clk: wm831x: get rid of the implementation of remove function   Mark Brown
• [PATCH] ASoC: generic: Add generic DT based simple codec   Mark Brown
• [PATCH] ASoc: kirkwood: Extend the min and max number of bytes per period   Mark Brown
• [PATCH 4/5] ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support   Mark Brown
• [PATCH 3/4] spi: davinci: Allow SPI to be build without EDMA support   Mark Brown
• [PATCH 3/4] spi: davinci: Allow SPI to be build without EDMA support   Mark Brown
• [PATCH] ASoC: generic: Add generic DT based simple codec   Mark Brown
• [PATCH 03/22] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Eric Bénard
• [PATCH 05/11] iio: pressure-core: st: Describe LPS331AP defines by name   Denis CIOCCA
• [PATCH 06/11] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Denis CIOCCA
• [PATCH 07/11] iio: sensors-core: st: Allow full-scale to be an optional feature   Denis CIOCCA
• [PATCH 08/11] iio: pressure-core: st: Allow for number of channels to vary   Denis CIOCCA
• [PATCH 06/11] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Denis CIOCCA
• [PATCH 06/11] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Denis CIOCCA
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Denis CIOCCA
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Denis CIOCCA
• [PATCH 38/38] iio: magn-core: st: Provide support for the LSM303DLH   Denis CIOCCA
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Denis CIOCCA
• [PATCH 38/38] iio: magn-core: st: Provide support for the LSM303DLH   Denis CIOCCA
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Denis CIOCCA
• [PATCH v6 4/4] ARM: dts: mvebu: Update with the new compatible string for mv64xxx-i2c   Gregory CLEMENT
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Gregory CLEMENT
• [PATCH] net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls   Gregory CLEMENT
• [PATCH v3 1/3] ARM: Introduce atomic MMIO modify   Gregory CLEMENT
• [PATCH v3 1/3] ARM: Introduce atomic MMIO modify   Gregory CLEMENT
• [PATCH 01/15] watchdog: orion: Remove unneeded BRIDGE_CAUSE clear   Gregory CLEMENT
• [PATCH 07/10] clk: mvebu: Staticize of_cpu_clk_setup   Gregory CLEMENT
• [PATCH v2 00/12] CPU idle for Armada XP   Gregory CLEMENT
• [PATCH v2 01/12] ARM: PJ4B: Add cpu_suspend/cpu_resume hooks for PJ4B   Gregory CLEMENT
• [PATCH v2 02/12] ARM: mvebu: ll_set_cpu_coherent no more uses the coherency address as parameter   Gregory CLEMENT
• [PATCH v2 03/12] ARM: mvebu: ll_set_cpu_coherent always uses the current CPU   Gregory CLEMENT
• [PATCH v2 04/12] ARM: mvebu: Remove the unused argument of set_cpu_coherent()   Gregory CLEMENT
• [PATCH v2 05/12] ARM: mvebu: Make ll_set_cpu_coherent() more configurable   Gregory CLEMENT
• [PATCH v2 06/12] ARM: mvebu: Low level functions to disable cache snooping   Gregory CLEMENT
• [PATCH v2 07/12] ARM: mvebu: Add a new set of registers for pmsu   Gregory CLEMENT
• [PATCH v2 08/12] ARM: mvebu: Allow to power down L2 cache controller in idle mode   Gregory CLEMENT
• [PATCH v2 09/12] ARM: mvebu: Add the PMSU related part of the cpu idle functions   Gregory CLEMENT
• [PATCH v2 10/12] ARM: mvebu: Set the start address of a CPU in a separate function   Gregory CLEMENT
• [PATCH v2 11/12] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Gregory CLEMENT
• [PATCH v2 12/12] ARM: dts: mvebu: Add a new set of registers to the PMSU node   Gregory CLEMENT
• [PATCH v2 00/12] CPU idle for Armada XP   Gregory CLEMENT
• [PATCH] drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries   Gregory CLEMENT
• [PATCH v2 11/12] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Gregory CLEMENT
• [PATCH v2 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Gregory CLEMENT
• [PATCH] ARM: mvebu: fix gated clock documentation   Gregory CLEMENT
• [PATCH 0/5] Add Core Divider clock support for Armada 370/XP   Gregory CLEMENT
• [PATCH 0/4] Add I2C support to ST SoCs   Maxime COQUELIN
• [PATCH 1/4] i2c: busses: i2c-st: Add ST I2C controller   Maxime COQUELIN
• [PATCH 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Maxime COQUELIN
• [PATCH 3/4] ARM: STi: Supply I2C configuration to STiH415 SoC   Maxime COQUELIN
• [PATCH 4/4] ARM: STi: Add I2C config to B2000 and B2020 boards   Maxime COQUELIN
• [PATCH 4/4] ARM: STi: Add I2C config to B2000 and B2020 boards   Maxime COQUELIN
• [PATCH 3/4] ARM: STi: Supply I2C configuration to STiH415 SoC   Maxime COQUELIN
• [PATCH 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Maxime COQUELIN
• [PATCH 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Maxime COQUELIN
• [PATCH 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Maxime COQUELIN
• [PATCH 1/4] i2c: busses: i2c-st: Add ST I2C controller   Maxime COQUELIN
• [PATCH 1/4] i2c: busses: i2c-st: Add ST I2C controller   Maxime COQUELIN
• [PATCH v2 0/4] Add I2C support to ST SoCs   Maxime COQUELIN
• [PATCH v2 1/4] i2c: busses: i2c-st: Add ST I2C controller   Maxime COQUELIN
• [PATCH v2 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Maxime COQUELIN
• [PATCH v2 3/4] ARM: STi: Supply I2C configuration to STiH415 SoC   Maxime COQUELIN
• [PATCH v2 4/4] ARM: STi: Add I2C config to B2000 and B2020 boards   Maxime COQUELIN
• [PATCH v2 1/4] i2c: busses: i2c-st: Add ST I2C controller   Maxime COQUELIN
• [PATCH 04/11] iio: pressure-i2c: st: Simplify error checking in probe()   Jonathan Cameron
• [PATCH 09/11] iio: pressure-core: st: Clean-up error handling in probe function   Jonathan Cameron
• [PATCH 26/38] iio: pressure-core: st: Clean-up probe() function   Jonathan Cameron
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Jonathan Cameron
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Jonathan Cameron
• [PATCH 10/38] Documentation: dt: iio: Add binding for LPS001WP   Jonathan Cameron
• [PATCH 11/38] Documentation: dt: iio: Add binding for LSM303DLH   Jonathan Cameron
• [PATCH 12/38] Documentation: dt: iio: Add binding for L3G4200D   Jonathan Cameron
• [PATCH 13/38] Documentation: dt: iio: Add binding for LSM303DLH   Jonathan Cameron
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Jonathan Cameron
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Jonathan Cameron
• [PATCH 18/38] iio: sensors-core: st: Allow full-scale to be an optional feature   Jonathan Cameron
• [PATCH 19/38] iio: sensors-core: st: Support sensors which don't have a Data Ready pin   Jonathan Cameron
• [PATCH 20/38] iio: sensors-core: st: Clean-up error handling in st_sensors_init_sensor()   Jonathan Cameron
• [PATCH 21/38] iio: sensors-core: st: Clean-up error handling in st_sensors_read_axis_data()   Jonathan Cameron
• [PATCH 22/38] iio: sensors-core: st: Clean-up error handling in st_sensors_read_info_raw()   Jonathan Cameron
• [PATCH 18/38] iio: sensors-core: st: Allow full-scale to be an optional feature   Jonathan Cameron
• [PATCH 23/38] iio: pressure-core: st: Describe LPS331AP defines by name   Jonathan Cameron
• [PATCH 24/38] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Jonathan Cameron
• [PATCH 25/38] iio: pressure-core: st: Allow for number of channels to vary   Jonathan Cameron
• [PATCH 26/38] iio: pressure-core: st: Clean-up probe() function   Jonathan Cameron
• [PATCH 28/38] iio: pressure: st: Add support for new LPS001WP pressure sensor   Jonathan Cameron
• [PATCH 29/38] iio: pressure-core: st: Provide support for the Vdd power supply   Jonathan Cameron
• [PATCH 31/38] iio: accel-core: st: Clean up error handling in probe()   Jonathan Cameron
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Jonathan Cameron
• [PATCH 38/38] iio: magn-core: st: Provide support for the LSM303DLH   Jonathan Cameron
• [PATCH 2/6] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Jonathan Cameron
• [PATCH 3/6] Staging/iio/adc/touchscreen/MXS: simplify register access   Jonathan Cameron
• [PATCH 4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver   Jonathan Cameron
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jonathan Cameron
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jonathan Cameron
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jonathan Cameron
• [PATCH 25/38] iio: pressure-core: st: Allow for number of channels to vary   Jonathan Cameron
• [PATCH 3/6] Staging/iio/adc/touchscreen/MXS: simplify register access   Jonathan Cameron
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Jonathan Cameron
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Jonathan Cameron
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jonathan Cameron
• [PATCH 5/7] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Jonathan Cameron
• [PATCH 7/7] Staging/iio/adc/touchscreen/MXS: provide devicetree adaption   Jonathan Cameron
• [PATCH 11/20] iio: sensors-core: st: Support sensors which don't have a Data Ready pin   Jonathan Cameron
• [PATCH 12/20] iio: sensors-core: st: Clean-up error handling in st_sensors_init_sensor()   Jonathan Cameron
• [PATCH 13/20] iio: sensors-core: st: Clean-up error handling in st_sensors_read_axis_data()   Jonathan Cameron
• [PATCH 14/20] iio: pressure-core: st: Clean-up probe() function   Jonathan Cameron
• [PATCH 15/20] iio: pressure: st: Add support for new LPS001WP pressure sensor   Jonathan Cameron
• [PATCH 18/20] iio: accel-core: st: Clean up error handling in probe()   Jonathan Cameron
• [PATCH 19/20] iio: gyro-core: st: Clean up error handling in probe()   Jonathan Cameron
• [PATCH 20/20] iio: magn-core: st: Clean up error handling in probe()   Jonathan Cameron
• [PATCH 16/20] iio: pressure-core: st: Provide support for the Vdd power supply   Jonathan Cameron
• [PATCH 11/20] iio: sensors-core: st: Support sensors which don't have a Data Ready pin   Jonathan Cameron
• [PATCH 16/20] iio: pressure-core: st: Provide support for the Vdd power supply   Jonathan Cameron
• [PATCH 17/20] iio: pressure-core: st: Provide support for the Vdd_IO power supply   Jonathan Cameron
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Ian Campbell
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Ian Campbell
• [PATCH v5 05/13] xen/arm,arm64: move Xen initialization earlier   Ian Campbell
• [linux-sunxi] Re: [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   Ian Campbell
• [linux-sunxi] Re: [PATCH 4/4] Add arch count timer node in dts for Allwinner A20(sunxi 7i).   Ian Campbell
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Ian Campbell
• [linux-sunxi] [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   Ian Campbell
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Ian Campbell
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Javier Martinez Canillas
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Javier Martinez Canillas
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Javier Martinez Canillas
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Javier Martinez Canillas
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Javier Martinez Canillas
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Javier Martinez Canillas
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Javier Martinez Canillas
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Javier Martinez Canillas
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Javier Martinez Canillas
• [PATCH v3 RFT 0/2] PM / Hibernate: sysfs resume   Sebastian Capella
• [PATCH v3 RFT 1/2] init/do_mounts.c: ignore final \n in name_to_dev_t   Sebastian Capella
• [PATCH v3 RFT 2/2] PM / Hibernate: use name_to_dev_t to parse resume   Sebastian Capella
• [RFC V2] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Steve Capper
• [RFC V2] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Steve Capper
• [RFC V2] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Steve Capper
• [RESEND RFC V2] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Steve Capper
• [RESEND RFC V2] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Steve Capper
• [PATCH] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Steve Capper
• [PATCH 3/3] KVM: ARM: Transparent huge pages and hugetlbfs support   Steve Capper
• [PATCH V2] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Steve Capper
• [PATCH v3 1/2] dmaengine: add interface of dma_get_slave_channel   Dan Carpenter
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Dan Carpenter
• [PATCH 2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Dan Carpenter
• [PATCH 5/5] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation   Dan Carpenter
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Dan Carpenter
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Dan Carpenter
• [patch] iio: mxs-lradc: use helper functions to simplify the code   Dan Carpenter
• [patch] iio: mxs-lradc: use helper functions to simplify the code   Dan Carpenter
• [PATCH 4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Dan Carpenter
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Dan Carpenter
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Josh Cartwright
• [PATCH] ARM: msm: Remove irqs-*.h files for DT based targets   Josh Cartwright
• [PATCH RFC v2 2/5] spmi: Linux driver framework for SPMI   Josh Cartwright
• [PATCH 1/2] ARM: msm: trout: fix 'pointer from integer' warnings   Josh Cartwright
• [PATCH 2/2] ARM: msm: trout: fix uninit var warning   Josh Cartwright
• [PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Josh Cartwright
• [PATCH 1/2] ARM: i.MX6: dts: change iomuxc pinctrl config to match Rev. 1 IMX6DQRM   Chaiken, Alison
• [PATCH] ARM: davinci: usb: provide minimal support for da850.   Paul Chavent
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Mauro Carvalho Chehab
• [PATCH v2] ARM: imx6qdl-wandboard: Add spdif support   Nicolin Chen
• [PATCH v3] ARM: imx6qdl-wandboard: Add spdif support   Nicolin Chen
• [PATCH 1/1] ARM: imx: mx6sl-evk: Enable USB function   Peter Chen
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   George Cherian
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   George Cherian
• [PATCH] arm: dts: am33xx: Add mmc nodes for am33xx platform   George Cherian
• [alsa-devel] [PATCH 00/14] SPDIF support   Lars-Peter Clausen
• [alsa-devel] [PATCH 00/14] SPDIF support   Lars-Peter Clausen
• [alsa-devel] [PATCH 00/14] SPDIF support   Lars-Peter Clausen
• Clock framework deadlock with external SPI clockchip   Lars-Peter Clausen
• [PATCH 11/11] iio: pressure-core: st: Provide correct regulator support   Lars-Peter Clausen
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Lars-Peter Clausen
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Lars-Peter Clausen
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Lars-Peter Clausen
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Lars-Peter Clausen
• [PATCH 4/7] ptp: switch to use gpiolib   Richard Cochran
• [PATCH 4/7] ptp: switch to use gpiolib   Richard Cochran
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Luca Coelho
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Luca Coelho
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Luca Coelho
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Luca Coelho
• [PULL REQUEST] big-endian updates for ARM   Jason Cooper
• [PATCH v6 4/4] ARM: dts: mvebu: Update with the new compatible string for mv64xxx-i2c   Jason Cooper
• Unhandled prefetch abort on mirabox with 3.11-rc7   Jason Cooper
• [GIT PULL] ARM: mvebu: fixes-non-critical for v3.12 (last one)   Jason Cooper
• [PATCH v6 4/4] ARM: dts: mvebu: Update with the new compatible string for mv64xxx-i2c   Jason Cooper
• [GIT PULL] ARM: mvebu: dt changes for v3.12 (round 2)   Jason Cooper
• [PATCH v3 0/5] Armada XP clocks for timer   Jason Cooper
• [GIT PULL V2 2/2] ARM: mvebu: MSI mvebu changes for v3.12   Jason Cooper
• [GIT PULL V2 2/2] ARM: mvebu: MSI mvebu changes for v3.12   Jason Cooper
• [GIT PULL V2 2/2] ARM: mvebu: MSI mvebu changes for v3.12   Jason Cooper
• [PATCH v3 0/5] Armada XP clocks for timer   Jason Cooper
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Jason Cooper
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Jason Cooper
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Jason Cooper
• [PATCH v2 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Jason Cooper
• mvebu: Armada XP doesn't boot in v3.12-rc1   Jason Cooper
• [PATCH] ARM: Kirkwood: Add missing DT reg property to cpu at 0   Jason Cooper
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Jason Cooper
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Jason Cooper
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Jason Cooper
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Jason Cooper
• [GIT PULL] ARM: mvebu: fixes for v3.12   Jason Cooper
• [GIT PULL] ARM: mvebu: fixes for v3.12   Jason Cooper
• [PATCH 11/26] ARM: dove: remove custom .init_time hook   Jason Cooper
• [PATCH 15/26] ARM: kirkwood: remove custom .init_time hook   Jason Cooper
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Jason Cooper
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Jason Cooper
• device tree binding documentation outdated   Jason Cooper
• device tree binding documentation outdated   Jason Cooper
• device tree binding documentation outdated   Jason Cooper
• [PATCH, FIX] ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high   Jason Cooper
• [PATCH] ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver   Jason Cooper
• [GIT PULL] ARM: mvebu: driver changes for v3.13   Jason Cooper
• [GIT PULL] ARM: mvebu: soc changes for v3.13   Jason Cooper
• [GIT PULL] ARM: mvebu: dt changes for v3.13   Jason Cooper
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Jason Cooper
• [PATCH 3/4] clk: kirkwood: Add CLK_IGNORE_UNUSED to ethernet ge0 and ge1 clocks   Jason Cooper
• [PATCH,FIX] ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102   Jason Cooper
• [PATCH 1/3] irqchip: irq-dove: Add PMU interrupt controller.   Jason Cooper
• [PATCH v2] [media] marvell-ccic: simplify and fix clk handling (a bit)   Jonathan Corbet
• [PATCH v4 0/5] ARM: tegra: support for Trusted Foundations   Alex Courbot
• [PATCH 3/7] misc: ixp4-beeper: use gpiolib strictly   Alex Courbot
• [PATCH v4 1/5] ARM: add basic Trusted Foundations support   Alexandre Courbot
• [PATCH v5 0/5] ARM: support for Trusted Foundations secure monitor   Alexandre Courbot
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Alexandre Courbot
• [PATCH v5 2/5] ARM: tegra: add support for Trusted Foundations   Alexandre Courbot
• [PATCH v5 3/5] ARM: tegra: split setting of CPU reset handler   Alexandre Courbot
• [PATCH v5 4/5] ARM: tegra: set CPU reset handler with firmware op   Alexandre Courbot
• [PATCH v5 5/5] ARM: tegra: support Trusted Foundations by default   Alexandre Courbot
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Alexandre Courbot
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Alexandre Courbot
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Alexandre Courbot
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Alexandre Courbot
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Alexandre Courbot
• [PATCH v6 0/5] ARM: support for Trusted Foundations secure monitor   Alexandre Courbot
• [PATCH v6 1/5] ARM: add basic support for Trusted Foundations   Alexandre Courbot
• [PATCH v6 2/5] ARM: tegra: add support for Trusted Foundations   Alexandre Courbot
• [PATCH v6 3/5] ARM: tegra: split setting of CPU reset handler   Alexandre Courbot
• [PATCH v6 4/5] ARM: tegra: set CPU reset handler with firmware op   Alexandre Courbot
• [PATCH v6 5/5] ARM: tegra: support Trusted Foundations by default   Alexandre Courbot
• [PATCH v6 1/5] ARM: add basic support for Trusted Foundations   Alexandre Courbot
• [PATCH v6 1/5] ARM: add basic support for Trusted Foundations   Alexandre Courbot
• [GIT PULL] ARM: OMAP: Device Tree for 3.12 take #2   Benoit Cousson
• [PATCH v2] ARM: dts: add AM33XX EDMA support   Benoit Cousson
• [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13   Benoit Cousson
• [PATCH v4 2/4] ARM: dts: am335x-boneblack: add eMMC DT entry   Benoit Cousson
• [PATCH v4 0/2] ARM: dts: Beaglebone MMC fixes   Benoit Cousson
• [PATCHv3 2/8] mailbox/omap: add support for parsing dt devices   Benoit Cousson
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Benoit Cousson
• [GIT PULL] ARM: DTS: Fix OMAP bugs for 3.12-rc   Benoit Cousson
• [GIT PULL] ARM: DTS: Fix OMAP bugs for 3.12-rc   Benoit Cousson
• [GIT PULL] ARM: DTS: Fix OMAP bugs for 3.12-rc, take #2   Benoit Cousson
• [PATCH] ARM: DTS: omap3-devkit8000.dts: fix a typo   Benoit Cousson
• [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support   Benoit Cousson
• [RFC 00/15] Device Tree schemas and validation   Benoit Cousson
• [PATCH 0/9] ARM: dts: DT data for OMAP platforms for v3.13   Benoit Cousson
• [PATCH 1/9] omap4: dts: Add node for AES   Benoit Cousson
• [PATCHv2 2/2] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974   Christopher Covington
• [PATCH] ARM: dts: Update arch timer node with clock frequency   Christopher Covington
• [PATCH v1 1/7] arm64: introduce basic aarch64 instruction decoding helpers   Christopher Covington
• [PATCH v2 0/3] Add PCIe support for i.MX6q   Sean Cross
• [PATCH v2 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q   Sean Cross
• [PATCH v2 2/3] ARM: imx6q: Add PCIe bits to GPR syscon definition   Sean Cross
• [PATCH v2 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v3 0/3] Add PCIe support for i.MX6q   Sean Cross
• [PATCH v3 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q   Sean Cross
• [PATCH v3 2/3] ARM: imx6q: Add PCIe bits to GPR syscon definition   Sean Cross
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v4 0/3] Add PCIe support for i.MX6q   Sean Cross
• [PATCH v4 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q   Sean Cross
• [PATCH v4 2/3] ARM: imx6q: Add PCIe bits to GPR syscon definition   Sean Cross
• [PATCH v4 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v5 0/3] Add PCIe support for i.MX6q   Sean Cross
• [PATCH v5 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q   Sean Cross
• [PATCH v5 2/3] ARM: imx6q: Add PCIe bits to GPR syscon definition   Sean Cross
• [PATCH v5 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v4 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v4 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v6 0/3] Add PCIe support for i.MX6q   Sean Cross
• [PATCH v6 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q   Sean Cross
• [PATCH v6 2/3] ARM: imx6q: Add PCIe bits to GPR syscon definition   Sean Cross
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sean Cross
• No subject   Drasko DRASKOVIC
• Socfpga timer1 activation   Drasko DRASKOVIC
• [PATCH v9 0/2] Introduce buffer synchronization framework   Inki Dae
• [PATCH v9 1/2] dmabuf-sync: Add a buffer synchronization framework   Inki Dae
• [PATCH v2 2/2] dma-buf: Add user interfaces for dmabuf sync support   Inki Dae
• [PATCH v3] ARM/KVM: save and restore generic timer registers   Christoffer Dall
• [PATCH] KVM: ARM: Fix typo in comments of inject_abt()   Christoffer Dall
• [PATCH 2/2] KVM: Add documentation for KVM_ARM_SUITABLE_TARGET ioctl   Christoffer Dall
• [PATCH 1/2] ARM/ARM64: KVM: Implement KVM_ARM_SUITABLE_TARGET ioctl   Christoffer Dall
• [PATCH 2/2] KVM: Add documentation for KVM_ARM_SUITABLE_TARGET ioctl   Christoffer Dall
• [RFC PATCH] arm64: KVM: honor cacheability attributes on S2 page fault   Christoffer Dall
• [RFC PATCH] arm64: KVM: honor cacheability attributes on S2 page fault   Christoffer Dall
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Christoffer Dall
• KVM virtual timer issue with trinity   Christoffer Dall
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Christoffer Dall
• [PATCH v2 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Christoffer Dall
• [PATCH v2 2/4] ARM64: KVM: Implement kvm_vcpu_preferred_target() function   Christoffer Dall
• [PATCH v2 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Christoffer Dall
• [PATCH v2 0/4] Target CPU=Host implementation for KVM ARM/ARM64   Christoffer Dall
• [PATCH 3/3] aarch64: kvm: introduce CONFIG_KVM_MAX_VCPUS   Christoffer Dall
• [PATCH 2/3] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Christoffer Dall
• [PATCH v3 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Christoffer Dall
• [PATCH v3 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Christoffer Dall
• [PATCH v3 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Christoffer Dall
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Christoffer Dall
• [GIT PULL] KVM/ARM Fixes for 3.12-rc2   Christoffer Dall
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Christoffer Dall
• [PATCH v4 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Christoffer Dall
• [PATCH v2] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Christoffer Dall
• [PATCH v4 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Christoffer Dall
• [PATCH 6/8] KVM: arm-vgic: Add vgic reg access from dev attr   Christoffer Dall
• [PATCH 6/8] KVM: arm-vgic: Add vgic reg access from dev attr   Christoffer Dall
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Christoffer Dall
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Christoffer Dall
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Christoffer Dall
• [PATCH 1/3] KVM: ARM: fix the size of TTBCR_{T0SZ,T1SZ} masks   Christoffer Dall
• [PATCH 2/3] KVM: ARM: Fix calculation of virtual CPU ID   Christoffer Dall
• [PATCH 3/3] KVM: ARM: Add support for Cortex-A7   Christoffer Dall
• [PATCH v2 0/8] Support VGIC save/restore using device control API   Christoffer Dall
• [PATCH v2 1/8] ARM: KVM: Allow creating the VGIC after VCPUs   Christoffer Dall
• [PATCH v2 2/8] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC   Christoffer Dall
• [PATCH v2 3/8] KVM: arm-vgic: Set base addr through device API   Christoffer Dall
• [PATCH v2 4/8] irqchip: arm-gic: Define additional MMIO offsets and masks   Christoffer Dall
• [PATCH v2 5/8] KVM: arm-vgic: Make vgic mmio functions more generic   Christoffer Dall
• [PATCH v2 6/8] KVM: arm-vgic: Add vgic reg access from dev attr   Christoffer Dall
• [PATCH v2 7/8] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers   Christoffer Dall
• [PATCH v2 8/8] KVM: arm-vgic: Support CPU interface reg access   Christoffer Dall
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Magnus Damm
• [PATCH 00/04] ARM: shmobile: Initial r8a7791 SoC and Koelsch board support   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Magnus Damm
• [PATCH 02/04] ARM: shmobile: r8a7791 SCIF support   Magnus Damm
• [PATCH 03/04] ARM: shmobile: r8a7791 CMT support   Magnus Damm
• [PATCH 04/04] ARM: shmobile: Koelsch support   Magnus Damm
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Magnus Damm
• [Query] CPUFreq: Does these machines have separate clock domains for CPUs?   Magnus Damm
• [PATCH v2 4/4] ARM: shmobile: BOCK-W reference: add Ether PFC settings   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Magnus Damm
• [PATCH 02/04] ARM: shmobile: r8a7791 SCIF support   Magnus Damm
• [PATCH 02/04] ARM: shmobile: r8a7791 SCIF support   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Magnus Damm
• [PATCH 00/04] ARM: shmobile: Initial r8a7791 SoC and Koelsch board support   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Magnus Damm
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Magnus Damm
• [PATCH] ARM: shmobile: Break out R-Car Gen2 setup code   Magnus Damm
• [PATCH] ARM: shmobile: r8a7791 IRQC support   Magnus Damm
• [PATCH] ARM: shmobile: r8a7791 Architected timer support   Magnus Damm
• [PATCH] ARM: shmobile: r8a7791 SMP support   Magnus Damm
• [PATCH 00/05] ARM: shmobile: Use CPU notifiers for SCU boot vector code   Magnus Damm
• [PATCH 01/05] ARM: shmobile: Add CPU notifier based SCU boot vector code   Magnus Damm
• [PATCH 02/05] ARM: shmobile: Let sh73a0 rely on SCU CPU notifier   Magnus Damm
• [PATCH 03/05] ARM: shmobile: Let EMEV2 rely on SCU CPU notifier   Magnus Damm
• [PATCH 04/05] ARM: shmobile: Let r8a7779 rely on SCU CPU notifier   Magnus Damm
• [PATCH 05/05] ARM: shmobile: Remove shmobile_smp_scu_boot_secondary()   Magnus Damm
• [PATCH] ARM: shmobile: Allow build of the MTU2 timer driver   Magnus Damm
• [PATCH 00/03] ARM: shmobile: Initial r7s72100 SoC and Genmai board support   Magnus Damm
• [PATCH 01/03] ARM: shmobile: Initial r7s72100 SoC support   Magnus Damm
• [PATCH 02/03] ARM: shmobile: r7s72100 SCIF support   Magnus Damm
• [PATCH 03/03] ARM: shmobile: Genmai support   Magnus Damm
• [PATCH] ARM: shmobile: Add r8a7790 thermal sensor DT device   Magnus Damm
• [PATCH/RFC] ARM: shmobile: Add r8a7791 thermal sensor DT device   Magnus Damm
• [PATCH] ARM: shmobile: Add r8a7791 Koelsch DT reference support   Magnus Damm
• [PATCH] ARM: shmobile: Allow build of the MTU2 timer driver   Magnus Damm
• [PATCH] ARM: shmobile: Add r8a7790 thermal sensor DT device   Magnus Damm
• [PATCH] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup   Magnus Damm
• [PATCH 2/5] ARM64: Move some signal code to a seperate file to be reused by ILP32.   David Daney
• [PATCH v9 1/3] gpio: bcm281xx: Add GPIO driver   Christian Daudt
• [PATCH v9 2/3] ARM: bcm281xx: Enable GPIO driver   Christian Daudt
• [PATCH v9 3/3] ARM: bcm281xx: Add device node for the GPIO controller   Christian Daudt
• [PATCH v3 2/5] ARM: bcm4760: Add platform infrastructure   Christian Daudt
• [PATCH] ARM: bcm: Add DEBUG_LL console support   Christian Daudt
• [PATCH] ARM: bcm: Add DEBUG_LL console support   Christian Daudt
• [PATCH v2] ARM: bcm: Add DEBUG_LL console support   Christian Daudt
• [PATCH 06/22] ARM: dts: bcm281xx: Remove '0x's from BCM11351 DTS file   Christian Daudt
• [PATCH] MAINTAINERS: Update mach-bcm related email address   Christian Daudt
• [PATCH] rename ARCH_BCM to ARCH_BCM_MOBILE   Christian Daudt
• [PATCH] rename ARCH_BCM to ARCH_BCM_MOBILE   Christian Daudt
• [PATCH v2 0/4] ARCH_BCM rename   Christian Daudt
• [PATCH v2 1/4] rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)   Christian Daudt
• [PATCH v2 2/4] rename ARCH_BCM to ARCH_BCM_MOBILE (clocksource)   Christian Daudt
• [PATCH v2 3/4] rename ARCH_BCM to ARCH_BCM_MOBILE (mmc)   Christian Daudt
• [PATCH v2 4/4] rename ARCH_BCM to ARCH_BCM_MOBILE (dt)   Christian Daudt
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Christian Daudt
• [PATCH] ARM: bcm281xx: more descriptive machine string   Christian Daudt
• [PATCH] ARM: bcm281xx: Add ARCH Timers to config   Christian Daudt
• [PATCH] iommu/arm-smmu: use devm_ioremap_resource() instead of devm_request_and_ioremap()   Will Deacon
• [PATCH v4] ARM: Add check for Cortex-A15 errata 798181 ECO   Will Deacon
• [PATCH] iommu/arm-smmu: use devm_ioremap_resource() instead of devm_request_and_ioremap()   Will Deacon
• [PATCH v3 1/3] ARM: Introduce atomic MMIO modify   Will Deacon
• [PATCH] Documentation/arm64: clarify requirements for DTB placement   Will Deacon
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Will Deacon
• [Patch v3 2/3] ARM: dts: Document the CCI PMU DT bindings   Will Deacon
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Will Deacon
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Will Deacon
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Will Deacon
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Will Deacon
• KVM virtual timer issue with trinity   Will Deacon
• [PATCH 2/5] arm: LLVMLinux: use current_stack_pointer for percpu   Will Deacon
• [RFC] ARM: kernel: io: Optimize memcpy_fromio function.   Will Deacon
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Will Deacon
• [RFC PATCH v2 04/25] smp, ARM: kill SMP single function call interrupt   Will Deacon
• [RFC PATCH v2 05/25] smp, ARM64: kill SMP single function call interrupt   Will Deacon
• KVM virtual timer issue with trinity   Will Deacon
• [PATCH 0/3] perf: parse the dwarf backtrace info from .debug_frame section   Will Deacon
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Will Deacon
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Will Deacon
• [PATCH] perf tools: Check libunwind for availability of dwarf parsing feature   Will Deacon
• [RFC PATCH 0/2] Aarch64: KGDB: kernel debugging support   Will Deacon
• [RFC PATCH 1/2] Aarch64: KGDB: Add Basic KGDB support   Will Deacon
• [RFC PATCH 2/2] Aarch64: KGDB: Add Step debugging support   Will Deacon
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Will Deacon
• [PATCH v3 0/6] Add support for pldw instruction on v7 MP cores   Will Deacon
• [PATCH v3 1/6] ARM: prefetch: remove redundant "cc" clobber   Will Deacon
• [PATCH v3 2/6] ARM: smp_on_up: move inline asm ALT_SMP patching macro out of spinlock.h   Will Deacon
• [PATCH v3 3/6] ARM: prefetch: add support for prefetchw using pldw on SMP ARMv7+ CPUs   Will Deacon
• [PATCH v3 4/6] ARM: locks: prefetch the destination word for write prior to strex   Will Deacon
• [PATCH v3 5/6] ARM: atomics: prefetch the destination word for write prior to strex   Will Deacon
• [PATCH v3 6/6] ARM: bitops: prefetch the destination word for write prior to strex   Will Deacon
• Commit breaks strace: ARM: entry: allow ARM-private syscalls to be restarted   Will Deacon
• Commit breaks strace: ARM: entry: allow ARM-private syscalls to be restarted   Will Deacon
• [PATCH v3 5/6] ARM: atomics: prefetch the destination word for write prior to strex   Will Deacon
• [PATCH] ARM: entry: fix tracing of ARM-private syscalls   Will Deacon
• [PATCH] ARM: entry: fix tracing of ARM-private syscalls   Will Deacon
• 3.12-rc1: no longer compiles for Nokia n900 (omap based)   Will Deacon
• [PATCH] ARM: include: asm: atomic.h: use type cast 's64' for the return value of atomic64_add_return().   Will Deacon
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Will Deacon
• [RFC PATCH 1/2] Aarch64: KGDB: Add Basic KGDB support   Will Deacon
• [PATCH 1/7] iommu/arm-smmu: Switch to arch_initcall for driver registration   Will Deacon
• [PATCH 0/7]: iommu/arm-smmu: Misc fixes/adaptions   Will Deacon
• [PATCH 2/7] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Will Deacon
• [PATCH 3/7] ARM: dma-mapping: Always pass proper prot flags to iommu_map()   Will Deacon
• [PATCH 4/7] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Will Deacon
• [PATCH 6/7] iommu/arm-smmu: Add module parameter arm-smmu=off|force_isolation   Will Deacon
• [PATCH 7/7] iommu/arm-smmu: Clear global and context bank fault status and syndrome registers   Will Deacon
• [PATCH] ARM: lockref: add support for lockless lockrefs using cmpxchg64   Will Deacon
• [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices   Will Deacon
• [PATCH v2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Will Deacon
• [PATCH 2/7] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Will Deacon
• [PATCH 7/7] iommu/arm-smmu: Clear global and context bank fault status and syndrome registers   Will Deacon
• [PATCH v2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Will Deacon
• [PATCH 3/9] ARM: dma-mapping: Always pass proper prot flags to iommu_map()   Will Deacon
• [PATCH 4/9] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Will Deacon
• [PATCH 5/9] iommu/arm-smmu: Clear global and context bank fault status registers   Will Deacon
• [PATCH 1/9] iommu/arm-smmu: Switch to arch_initcall for driver registration   Will Deacon
• [PATCH 2/9] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Will Deacon
• [PATCH 8/9] iommu/arm-smmu: Introduce a default fault handler   Will Deacon
• [PATCH 4/9] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Will Deacon
• [PATCH 4/9] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Will Deacon
• [PATCH 2/9] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Will Deacon
• [RFT PATCH v1 6/7] amd64: avoid saving and restoring FPSIMD registers until threads access them   Will Deacon
• [PATCH v2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Will Deacon
• [PATCH 2/9] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Will Deacon
• [RFT PATCH v1 0/7] enable FPSIMD lazy save and restore for arm64   Will Deacon
• [PATCH 7/9] iommu/arm-smmu: Add function that conditionally isolates all masters of all SMMUs   Will Deacon
• [PATCH 6/9] iommu/arm-smmu: Support buggy implemenations where all config accesses are secure   Will Deacon
• [RFT PATCH v1 6/7] amd64: avoid saving and restoring FPSIMD registers until threads access them   Will Deacon
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Will Deacon
• [PATCH] iommu/arm-smmu: Clear global and context bank fault status registers   Will Deacon
• [PATCH 1/2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Will Deacon
• [PATCH 2/2] ARM: include: asm: use 'int' instead of 'unsigned long' for normal register variables within atomic.h   Will Deacon
• [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support   Will Deacon
• [PATCH] iommu/arm-smmu: Clear global and context bank fault status registers   Will Deacon
• [PATCH] [PATCH] clocksource: tcb: fix min_delta calculation   Ludovic Desroches
• [PATCH] [PATCH] clocksource: tcb: fix min_delta calculation   Ludovic Desroches
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Ludovic Desroches
• [PATCH 1/2] ARM: tegra: enable PALMAS_PINCTRL config   Laxman Dewangan
• [PATCH V2 2/2] ARM: tegra: add palmas pincontrol to Dalmore device tree   Laxman Dewangan
• [PATCH REPOST] ARM: tegra: use dt-binding header for key code   Laxman Dewangan
• [PATCH REPOST] ARM: tegra: use dt-binding header for key code   Laxman Dewangan
• [PATCH] clk: wm831x: get rid of the implementation of remove function   Laxman Dewangan
• [PATCH] misc: (at24) move header to linux/platform_data/   Vivien Didelot
• [PATCH v2] misc: (at24) move header to linux/platform_data/   Vivien Didelot
• [PATCH 2/2] ARM: OMAP4+: Move SRAM data to DT   Russ Dill
• [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support   Russ Dill
• [PATCH 2/2] ARM: OMAP4+: Move SRAM data to DT   Russ Dill
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russ Dill
• [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support   Russ Dill
• [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support   Russ Dill
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russ Dill
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russ Dill
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russ Dill
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russ Dill
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russ Dill
• [RFC 3/4] Misc: SRAM: Hack for allowing executable code in SRAM.   Russ Dill
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russ Dill
• [RFC PATCH 00/11] Embeddable Position Independent Executable   Russ Dill
• [RFC PATCH 01/11] asm-generic: io: Add exec versions of ioremap   Russ Dill
• [RFC PATCH 02/11] lib: devres: Add exec versions of devm_ioremap_resource and friends   Russ Dill
• [RFC PATCH 03/11] misc: SRAM: Add option to map SRAM to allow code execution   Russ Dill
• [RFC PATCH 04/11] asm-generic: fncpy: Add function copying macros   Russ Dill
• [RFC PATCH 05/11] PIE: Support embedding position independent executables   Russ Dill
• [RFC PATCH 06/11] ARM: PIE: Add position independent executable embedding to ARM   Russ Dill
• [RFC PATCH 07/11] ARM: PIE: Add support for updating PIE relocations   Russ Dill
• [RFC PATCH 08/11] ARM: PIE: Add macro for generating PIE resume trampoline   Russ Dill
• [RFC PATCH 09/11] ARM: dts: AM33XX: Associate SRAM with MPU and mark it exec   Russ Dill
• [RFC PATCH 10/11] ARM: OMAP2+: AM33XX: Add PIE support for AM33XX   Russ Dill
• [RFC PATCH 11/11] ARM: OMAP2+: AM33XX: Basic suspend resume support   Russ Dill
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Vincent Donnefort
• [PULL REQUEST] big-endian updates for ARM   Ben Dooks
• [PULL REQUEST] big-endian updates for ARM   Ben Dooks
• [PULL REQUEST] big-endian updates for ARM   Ben Dooks
• [PULL REQUEST] big-endian updates for ARM   Ben Dooks
• [PULL REQUEST] big-endian updates for ARM   Ben Dooks
• 3.11-rc7 big endian - atags and bootloader updates   Ben Dooks
• [PULL REQUEST v2] big-endian support   Ben Dooks
• [PATCH 1/5] clk: mvebu: Add core-divider clock   Ben Dooks
• new binutils needed for arm in 3.12-rc1   Ben Dooks
• [linux-sunxi] [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   Ben Dooks
• [PATCH v2 0/4] *** ARM: imx6sl: add FEC support for imx6sl evk platform ***   Fugang Duan
• [PATCH v2 1/4] ARM: dts: add iomuxc-gpr device node for imx6sl   Fugang Duan
• [PATCH v2 2/4] ARM: dts: add fec phy reset for imx6sl evk board   Fugang Duan
• [PATCH v2 3/4] ARM: imx6sl: add imx6sl iomux-gpr field define   Fugang Duan
• [PATCH v2 4/4] ARM: imx6sl: config iomux-gpr1 to select clock for fec   Fugang Duan
• [PATCH] dma: use %pa to print dma_addr_t   Randy Dunlap
• [PATCH] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [RESEND PATCH v2] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [RESEND PATCH v2] pwm: pxa: add device tree support to pwm driver   Mike Dunn
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH v4] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH v4] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH v5 0/2] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH v5 1/2] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH v5 2/2] PXA: add PWM nodes to pxa27x.dtsi   Mike Dunn
• [PATCH RESEND v5 0/2] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver   Mike Dunn
• [PATCH RESEND v5 2/2] PXA: add PWM nodes to pxa27x.dtsi   Mike Dunn
• [PATCH, FIX] ARM: mvebu: fix ReadyNAS 102 Power button GPIO to make it active high   Arnaud Ebalard
• [PATCH] ARM: mvebu: Add DT entry for ReadyNAS 102 to use gpio-poweroff driver   Arnaud Ebalard
• [PATCH, FIX] ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102   Arnaud Ebalard
• [PATCH] clk: only call get_parent if there is one   Alex Elder
• [PATCH] clk: clean up everything on debugfs error   Alex Elder
• [PATCH] ARM: mxs: pm: Include "pm.h"   Fabio Estevam
• [PATCH v2] ARM: imx6qdl-wandboard: Add spdif support   Fabio Estevam
• [PATCH v3] ARM: imx6qdl-wandboard: Add spdif support   Fabio Estevam
• [PATCH 03/22] pinctrl: pinctrl-imx: add imx25 pinctrl driver   Fabio Estevam
• [PATCH] ARM: mach-imx: clk-imx51-imx53: Fix 'spdif1_pred' clock registration   Fabio Estevam
• [patch] iio: mxs-lradc: use helper functions to simplify the code   Fabio Estevam
• [PATCH 1/2] ARM: dts: mx6: Add mx6solo support   Fabio Estevam
• [PATCH 2/2] ARM: dts: Add imx6s-wandboard support   Fabio Estevam
• [PATCH 1/2] ARM: dts: mx6: Add mx6solo support   Fabio Estevam
• [PATCH 1/2] ARM: dts: mx6: Add mx6solo support   Fabio Estevam
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Fabio Estevam
• [PATCH] ARM: dts: imx6sl: Add spi aliases   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabresd: SDHC ports are 8 bit-wide   Fabio Estevam
• [PATCH] ARM: dts: imx28-evk: Enable touchscreen support   Fabio Estevam
• mxsfb on i.MX28 uses bypassed ref_xtal 24MHz clock for LCD   Fabio Estevam
• [PATCH] clk: mxs: source LCD clock from PLL instead of from ref_xtal   Fabio Estevam
• [PATCH 1/9] Staging/iio/adc/touchscreen/MXS: add proper clock handling   Fabio Estevam
• at91sam9263 not booting on 3.12-rc1   Fabio Estevam
• [PATCH 1/9] Staging/iio/adc/touchscreen/MXS: add proper clock handling   Fabio Estevam
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Fabio Estevam
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Fabio Estevam
• imprecise external abort using the flexcan driver on i.MX6Q   Fabio Estevam
• imprecise external abort using the flexcan driver on i.MX6Q   Fabio Estevam
• device tree binding documentation outdated   Fabio Estevam
• [PATCH] ARM: dts: imx6q-udoo: Add initial board support   Fabio Estevam
• device tree binding documentation outdated   Fabio Estevam
• [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog   Fabio Estevam
• [PATCH 2/3] ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios   Fabio Estevam
• [PATCH 3/3] ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios   Fabio Estevam
• device tree binding documentation outdated   Fabio Estevam
• device tree binding documentation outdated   Fabio Estevam
• [RFC PATCH] imx: video: staging: Add HDMI support to imx-drm driver   Fabio Estevam
• [PATCH 1/2] ARM: imx_v6_v7_defconfig: Add SPDIF support   Fabio Estevam
• [PATCH 2/2] ARM: imx_v6_v7_defconfig: Add CHIPIDEA_UDC support   Fabio Estevam
• [PATCH] ARM: mxs: stub out mxs_pm_init for !CONFIG_PM   Fabio Estevam
• [PATCH] ARM: multi_v7_defconfig: add SDHCI for i.MX   Fabio Estevam
• [PATCH] ARM: mach-imx: cpu: Include <linux/err.h>   Fabio Estevam
• [PATCH] ARM: mxs_defconfig: Add CHIPIDEA_UDC support   Fabio Estevam
• [PATCH 1/3] ARM: mach-imx: clk-imx51-imx53: Retrieve base address and irq from dt   Fabio Estevam
• [PATCH 2/3] ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt   Fabio Estevam
• [PATCH 3/3] ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt   Fabio Estevam
• [PATCH 1/4] i2c: busses: i2c-st: Add ST I2C controller   Gabriel FERNANDEZ
• [RFC PATCHv2 0/4] Add DT support for fixed PHYs   Florian Fainelli
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Florian Fainelli
• Status of ARM FIQ?   Florian Fainelli
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Gerlando Falauto
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Gerlando Falauto
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Gerlando Falauto
• [PATCH 2/2] mmc: omap_hsmmc: Enable SDIO interrupt   Andreas Fenkart
• [PATCH v4 2/6] dma: edma: Write out and handle MAX_NR_SG at a given time   Joel Fernandes
• [PATCH v2] ARM: dts: add AM33XX EDMA support   Joel Fernandes
• [PATCH] arm: dts: am33xx: Add mmc nodes for am33xx platform   Joel Fernandes
• [PATCH v2] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Joel Fernandes
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Joel Fernandes
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Joel Fernandes
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Joel Fernandes
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Joel Fernandes
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Fernandes, Joel
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Joel Fernandes
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Joel Fernandes
• [PATCH 1/3] crypto: omap-des: Add omap-des driver for OMAP4/AM43xx   Joel Fernandes
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13   Joel Fernandes
• [PATCH 1/3] ARM: dts: add AM33XX EDMA support   Joel Fernandes
• [PATCH 2/3] ARM: dts: add AM33XX SPI DMA support   Joel Fernandes
• [PATCH 3/3] ARM: dts: add AM33XX MMC support and documentation   Joel Fernandes
• [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13   Joel Fernandes
• [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH 0/3] dma: edma: Add cyclic DMA support   Joel Fernandes
• [PATCH 1/3] dma: edma: Split out PaRAM set calculations into its own function   Joel Fernandes
• [PATCH 2/3] dma: edma: Add support for Cyclic DMA   Joel Fernandes
• [PATCH 3/3] dma: edma: Increase maximum SG limit to 20   Joel Fernandes
• [PATCH 0/9] ARM: dts: DT data for OMAP platforms for v3.13   Joel Fernandes
• [PATCH 1/9] omap4: dts: Add node for AES   Joel Fernandes
• [PATCH 2/9] omap4: dts: Add node for DES3DES module   Joel Fernandes
• [PATCH 3/9] ARM: dts: Add SHAM data and documentation for AM33XX   Joel Fernandes
• [PATCH 4/9] ARM: dts: Add AES data and documentation for AM33XX   Joel Fernandes
• [PATCH 5/9] am33xx: dts: Fix AES interrupt number   Joel Fernandes
• [PATCH 6/9] ARM: am437x: dts: Add AES node for am437x   Joel Fernandes
• [PATCH 7/9] ARM: am437x: dts: Add DES node for am437x   Joel Fernandes
• [PATCH 8/9] ARM: dts: AM33XX: Add LCDC info into am335x-evm   Joel Fernandes
• [PATCH 9/9] dts: boneblack: add pinmux and hdmi node to enable display   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Joel Fernandes
• [PATCH v2 0/9] ARM: dts: DT data for OMAP platforms for v3.13   Joel Fernandes
• [PATCH v2 1/9] omap4: dts: Add node for AES   Joel Fernandes
• [PATCH v2 2/9] omap4: dts: Add node for DES3DES module   Joel Fernandes
• [PATCH v2 3/9] ARM: dts: Add SHAM data and documentation for AM33XX   Joel Fernandes
• [PATCH v2 4/9] ARM: dts: Add AES data and documentation for AM33XX   Joel Fernandes
• [PATCH v2 5/9] am33xx: dts: Fix AES interrupt number   Joel Fernandes
• [PATCH v2 6/9] ARM: am437x: dts: Add AES node for am437x   Joel Fernandes
• [PATCH v2 7/9] ARM: am437x: dts: Add DES node for am437x   Joel Fernandes
• [PATCH v2 8/9] ARM: dts: AM33XX: Add LCDC info into am335x-evm   Joel Fernandes
• [PATCH v2 9/9] dts: boneblack: add pinmux and hdmi node to enable display   Joel Fernandes
• [PATCH] mmc: atmel-mci: abort transfer on timeout error   Nicolas Ferre
• [PATCH] mmc: atmel-mci: fix oops in atmci_tasklet_func   Nicolas Ferre
• [PATCH 1/2] pwm: atmel-tcb: add missing clk source config   Nicolas Ferre
• [PATCH 2/2] pwm: atmel-tcb: fix max time computation for slow clk source   Nicolas Ferre
• [PATCH] at91: serial: fix wrong pinctrl_usart2_rts   Nicolas Ferre
• [PATCH] at91: serial: sam9g25: add usart3 to dtsi   Nicolas Ferre
• [PATCH] at91: mmc: fix missing pinctrl in dt   Nicolas Ferre
• [PATCH] ARM: at91: at91sam9x5: set default mmc[01] pinctrl-names   Nicolas Ferre
• [PATCH][RESEND] ARM: at91: remove IRQF_DISABLED   Nicolas Ferre
• [PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string   Nicolas Ferre
• [PATCH] phy/micrel: Add suspend/resume support to Micrel PHYs   Nicolas Ferre
• [PATCH] phy/micrel: Add suspend/resume support to Micrel PHYs   Nicolas Ferre
• [PATCH] phy/micrel: Add suspend/resume support to Micrel PHYs   Nicolas Ferre
• [PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver   Nicolas Ferre
• [PATCH 36/51] DMA-API: usb: use dma_set_coherent_mask()   Nicolas Ferre
• [PATCH 37/51] DMA-API: usb: use new dma_coerce_mask_and_coherent()   Nicolas Ferre
• [PATCH v3] PWM: at91: add Atmel PWM controller driver   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.12 #1   Nicolas Ferre
• [PATCH] ARM: at91: sama5d: add the PWM clock   Nicolas Ferre
• [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP   Nicolas Ferre
• [PATCH v4] PWM: atmel-pwm: add PWM controller driver   Nicolas Ferre
• [PATCH v2] ARM: at91: cam60: fix incorrect placement of __initdata tag   Nicolas Ferre
• [PATCH v2] ARM: at91: sam9g45: shutdown ddr1 too when rebooting   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.12 #2   Nicolas Ferre
• [RFC Patch v2 0/3] add temporary parent migration support   Tomasz Figa
• 3.12 merge window exynos cpufreq driver fails to build   Tomasz Figa
• 3.12 merge window exynos cpufreq driver fails to build   Tomasz Figa
• [RFC Patch v2 0/3] add temporary parent migration support   Tomasz Figa
• [PATCH 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Tomasz Figa
• [PATCH 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Tomasz Figa
• [PATCH v2 00/12] clk/exynos convert clock IDs to macros   Tomasz Figa
• [PATCH v4 5/5] clk: dt: binding for basic gate clock   Tomasz Figa
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Tomasz Figa
• [PATCH v2 00/12] clk/exynos convert clock IDs to macros   Tomasz Figa
• [PATCH 3/3] arm: dts: socfpga: Add support for SD/MMC   Tomasz Figa
• [PATCH] ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4,5]_DT config options   Tomasz Figa
• [PATCH] irqchip: exynos-combiner: remove hard-coded irq_base value   Tomasz Figa
• [PATCH 1/6] clk: exynos-audss: convert to platform device   Tomasz Figa
• [PATCH 2/6] clk: exynos-audss: allow input clocks to be specified in device tree   Tomasz Figa
• [PATCH 4/6] ARM: dts: exynos5250: add sclk_pcm_in to audss clock controller   Tomasz Figa
• [PATCH 5/6] clk: exynos-audss: add support for Exynos 5420   Tomasz Figa
• [PATCH 6/6] ARM: dts: exynos5420: add sclk_pcm_in to audss clock controller   Tomasz Figa
• [PATCH 3/6] clk: exynos5250: add clock ID for div_pcm0   Tomasz Figa
• [PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value   Tomasz Figa
• [PATCH v5 0/4] media: s5p-tv: clean-up and fixes   Tomasz Figa
• [PATCH v4 0/3] ARM: S5PV210: move to common clk framework   Tomasz Figa
• [PATCH] DT: S5P: If detected device tree skip irq init   Tomasz Figa
• [PATCH] ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4,5]_DT config options   Tomasz Figa
• [PATCH] DT: if dt is available don't use s3c_arch_init   Tomasz Figa
• [PATCH] spi: s3c64xx: Add missing compatibles   Tomasz Figa
• [PATCH 1/6] clk: exynos-audss: convert to platform device   Tomasz Figa
• [PATCH V2 1/6] clk: exynos-audss: convert to platform device   Tomasz Figa
• [PATCH v5 0/3] ARM: S5PV210: move to common clk framework   Tomasz Figa
• [PATCH v5 1/3] clk: samsung: Add clock driver for s5pc110/s5pv210   Tomasz Figa
• [PATCH] pinctrl: Correct number of pins for s5pv210   Tomasz Figa
• [PATCH V3 1/6] clk: exynos-audss: convert to platform device   Tomasz Figa
• [PATCH v2] ARM: SAMSUNG: S5P: If detected device tree skip irq init   Tomasz Figa
• [PATCH RESEND CRITICAL] clocksource: exynos_mct: Set IRQ affinity when the CPU goes online   Tomasz Figa
• [PATCH RESEND REGRESSION] ARM: dts: exynos4210: Work around lack of cpufreq regulator lookup   Tomasz Figa
• [PATCH 12/26] ARM: exynos: remove custom .init_time hook   Tomasz Figa
• [PATCH] clockevent: exynos_mct: fix lockdep warning   Tomasz Figa
• [PATCH 2/3] clk: samsung: Add clock driver for s5pc100   Tomasz Figa
• [PATCH] ARM: s3c64xx: Select CPU_V6K instead of CPU_V6   Tomasz Figa
• [PATCH 1/5] ARM: Kconfig: Move if ARCH_S3C64XX statement to mach-s3c64xx/Kconfig   Tomasz Figa
• [PATCH 2/5] gpio: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support   Tomasz Figa
• [PATCH 3/5] [media] s3c-camif: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support   Tomasz Figa
• [PATCH 4/5] ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support   Tomasz Figa
• [PATCH 5/5] ARM: s3c64xx: Kill CONFIG_PLAT_S3C64XX   Tomasz Figa
• [PATCH 1/3] clk: Add error handling to clk_fetch_parent_index()   Tomasz Figa
• [PATCH 2/3] clk: Use kcalloc() to allocate arrays   Tomasz Figa
• [PATCH 3/3] clk: Correct lookup logic in clk_fetch_parent_index()   Tomasz Figa
• [PATCH 2/3] clk: samsung: Add clock driver for s5pc100   Tomasz Figa
• [PATCH] ARM: s3c64xx: mini6410: Correct card detect type for HSMMC1   Tomasz Figa
• [PATCH V3 RFC 00/16] EFI stub for ARM   Matt Fleming
• [PATCH V3 RFC 00/16] EFI stub for ARM   Matt Fleming
• [RFC PATCH 3/3] KVM: ARM: Update documentation for KVM_ARM_VCPU_INIT ioctl   Claudio Fontana
• [RFC PATCH 1/3] ARM: KVM: Implement target CPU=Host   Claudio Fontana
• [RFC PATCH 2/3] ARM64: KVM: Implement target CPU=Host   Claudio Fontana
• [PATCH V3 RFC 00/16] EFI stub for ARM   Roy Franz
• [PATCH V4 0/6] ADD ARM EFI stub   Roy Franz
• [PATCH 1/6] efi-stub.txt updates for ARM   Roy Franz
• [PATCH 2/6] Add shared update_fdt() function for ARM/ARM64   Roy Franz
• [PATCH 3/6] Add strstr to compressed string.c for ARM.   Roy Franz
• [PATCH 4/6] Add EFI stub for ARM   Roy Franz
• [PATCH 5/6] Disable stack protection for decompressor/stub   Roy Franz
• [PATCH 6/6] Add config EFI_STUB for ARM to Kconfig   Roy Franz
• [PATCH V2 ] Improve EFI stub command line conversion   Roy Franz
• [PATCH] Improve EFI stub command line conversion   Roy Franz
• [PATCH v2 3/4] ARM: imx6sl: add imx6sl iomux-gpr field define   Duan Fugang-B38611
• [PATCH v2 2/4] ARM: dts: add fec phy reset for imx6sl evk board   Duan Fugang-B38611
• [PATCH v2 2/4] ARM: dts: add fec phy reset for imx6sl evk board   Duan Fugang-B38611
• kmalloc memory slower than malloc   Duan Fugang-B38611
• kmalloc memory slower than malloc   Duan Fugang-B38611
• device tree binding documentation outdated   Duan Fugang-B38611
• device tree binding documentation outdated   Duan Fugang-B38611
• bug? kernel (3.10.7) panic while copying mmc partition in custom board with tx-28 module (imx28)   Alex Gal
• [PATCHv2 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Kumar Gala
• [PATCHv2 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Kumar Gala
• [PATCHv2 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Kumar Gala
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Kumar Gala
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Kumar Gala
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Kumar Gala
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Kumar Gala
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Kumar Gala
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Kumar Gala
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Kumar Gala
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Kumar Gala
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Kumar Gala
• [PATCH] ARM: msm: Rename msm devicetrees to have standard 'qcom' prefix   Kumar Gala
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Kumar Gala
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Kumar Gala
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Kumar Gala
• [PATCH] ARM: include: asm: atomic.h: use type cast 's64' for the return value of atomic64_add_return().   Chen Gang
• [PATCH v3] ARM: VExpress: Makefile: add armv7 flags for inline assmembly code compiling   Chen Gang
• [PATCH] ARM: include: asm: atomic.h: use type cast 's64' for the return value of atomic64_add_return().   Chen Gang
• [PATCH] ARM: include: asm: atomic.h: use type cast 's64' for the return value of atomic64_add_return().   Chen Gang
• [PATCH v2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Chen Gang
• [PATCH v2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Chen Gang
• [PATCH v2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Chen Gang
• [PATCH v2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Chen Gang
• [PATCH 0/2] ARM: include: asm: change functions' and variables' types in atomic.h   Chen Gang
• [PATCH 1/2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Chen Gang
• [PATCH 2/2] ARM: include: asm: use 'int' instead of 'unsigned long' for normal register variables within atomic.h   Chen Gang
• [PATCH 2/2] ARM: include: asm: use 'int' instead of 'unsigned long' for normal register variables within atomic.h   Chen Gang
• [PATCH 1/2] ARM: include: asm: use 'long long' instead of 'u64' within atomic.h   Chen Gang
• [PATCH v3 0/5] Armada XP clocks for timer   Ezequiel Garcia
• [PATCH] mtd: atmel_nand: fix the warning when CONFIG_OF is not defined   Ezequiel Garcia
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Ezequiel Garcia
• [PATCH 2/2] mtd: atmel_nand: add MODULE_DEVICE_TABLE for nfc driver   Ezequiel Garcia
• [PATCH v3 0/5] Armada XP clocks for timer   Ezequiel Garcia
• [PATCH] mtd: nand: pxa3xx: Add pxa3xx_nand_get_variant() stub for !CONFIG_OF   Ezequiel Garcia
• [PATCH v3 0/5] Armada XP clocks for timer   Ezequiel Garcia
• [PATCH] mtd: nand: pxa3xx: Add pxa3xx_nand_get_variant() stub for !CONFIG_OF   Ezequiel Garcia
• [PATCH] arm: Kirkwood - Remove kirkwood_setup_wins and rely on the DT binding   Ezequiel Garcia
• mvebu: Armada XP doesn't boot in v3.12-rc1   Ezequiel Garcia
• mvebu: Armada XP doesn't boot in v3.12-rc1   Ezequiel Garcia
• [PATCH] arm: Kirkwood - Remove kirkwood_setup_wins and rely on the DT binding   Ezequiel Garcia
• [PATCH 3/3] ARM: kirkwood: Move the nand node under the mbus node   Ezequiel Garcia
• mvebu: Armada XP doesn't boot in v3.12-rc1   Ezequiel Garcia
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Ezequiel Garcia
• [PATCH] clk: fixed-factor: Fix a trivial typo   Ezequiel Garcia
• [PATCH] clk: fixed-factor: Fix device-tree binding typo   Ezequiel Garcia
• [PATCH 0/5] Add Core Divider clock support for Armada 370/XP   Ezequiel Garcia
• [PATCH 1/5] clk: mvebu: Add core-divider clock   Ezequiel Garcia
• [PATCH 2/5] ARM: mvebu: Add Core Divider clock device-tree binding   Ezequiel Garcia
• [PATCH 3/5] ARM: mvebu: Add a 2 GHz fixed-clock Armada 370/XP   Ezequiel Garcia
• [PATCH 4/5] ARM: mvebu: Add the core-divider clock to Armada 370/XP   Ezequiel Garcia
• [PATCH 5/5] ARM: mvebu: Add NAND clock to Armada 370/XP   Ezequiel Garcia
• [PATCH 0/5] Add Core Divider clock support for Armada 370/XP   Ezequiel Garcia
• [PATCH 2/5] ARM: mvebu: Add Core Divider clock device-tree binding   Ezequiel Garcia
• [PATCH 1/5] clk: mvebu: Add core-divider clock   Ezequiel Garcia
• [PATCH 0/5] Add Core Divider clock support for Armada 370/XP   Ezequiel Garcia
• [PATCH 0/5] Add Core Divider clock support for Armada 370/XP   Ezequiel Garcia
• [PATCH 1/5] clk: mvebu: Add core-divider clock   Ezequiel Garcia
• [PATCH v2 0/4] Add Core Divider clock support for Armada 370/XP   Ezequiel Garcia
• [PATCH v2 1/4] clk: mvebu: Add Core Divider clock   Ezequiel Garcia
• [PATCH v2 2/4] ARM: mvebu: Add Core Divider clock device-tree binding   Ezequiel Garcia
• [PATCH v2 3/4] ARM: mvebu: Add a 2 GHz fixed-clock Armada 370/XP   Ezequiel Garcia
• [PATCH v2 4/4] ARM: mvebu: Add the core-divider clock to Armada 370/XP   Ezequiel Garcia
• [PATCH] ARM: mvebu: config: Add GPIO connected LEDs support to defconfig   Ezequiel Garcia
• [PATCH v2 1/3] ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding (Was Re: ..)   Ezequiel Garcia
• [PATCH 3/3] ARM: kirkwood: Move the nand node under the mbus node   Ezequiel Garcia
• [PATCH v2 1/3] ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding (Was Re: ..)   Ezequiel Garcia
• [PATCH v2 1/3] ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding (Was Re: ..)   Ezequiel Garcia
• [PATCH 0/4] Kirkwood: minor cleanups   Ezequiel Garcia
• [PATCH 1/4] ARM: kirkwood: Remove unneeded MBus initialization   Ezequiel Garcia
• [PATCH 2/4] ARM: kirkwood: Remove unneeded PCIe clock adding   Ezequiel Garcia
• [PATCH 3/4] clk: kirkwood: Add CLK_IGNORE_UNUSED to ethernet ge0 and ge1 clocks   Ezequiel Garcia
• [PATCH 4/4] ARM: kirkwood: Remove redundant ethernet clock enable   Ezequiel Garcia
• [PATCH 0/4] Kirkwood: minor cleanups   Ezequiel Garcia
• [PATCH] TTY: hvc_dcc: probe for a JTAG connection before registering   Tim Gardner
• [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Vivek Gautam
• [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Vivek Gautam
• [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY   Vivek Gautam
• [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY   Vivek Gautam
• [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY   Vivek Gautam
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Richard Genoud
• [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support   Dave Gerlach
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Getz, Robin
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Dennis Gilmore
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Thomas Gleixner
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Thomas Gleixner
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Thomas Gleixner
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Thomas Gleixner
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Thomas Gleixner
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Thomas Gleixner
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Thomas Gleixner
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Thomas Gleixner
• [PATCH] [PATCH] clocksource: tcb: fix min_delta calculation   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [RESEND PATCHv3 1/2] clocksource: dw_apb_timer: Move timer defines to header file.   Thomas Gleixner
• [RESEND PATCHv3 1/2] clocksource: dw_apb_timer: Move timer defines to header file.   Thomas Gleixner
• [PATCHv4 2/2] clocksource: dw_apb_timer_of: Fix read_sched_clock   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Thomas Gleixner
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Thomas Gleixner
• [RFC PATCHv2 0/4] Add DT support for fixed PHYs   Christian Gmeiner
• [PATCH V2] USB: EHCI: make ehci-w90X900 a separate driver   Manjunath Goudar
• [PATCH V5 0/9] USB: OHCI: more bus glues as separate modules   Manjunath Goudar
• [PATCH V5 1/9] USB: OHCI: make ohci-exynos a separate driver   Manjunath Goudar
• [PATCH V5 2/9] USB: OHCI: make ohci-omap a separate driver   Manjunath Goudar
• [PATCH V5 3/9] USB: OHCI: make ohci-omap3 a separate driver   Manjunath Goudar
• [PATCH V5 4/9] USB: OHCI: make ohci-spear a separate driver   Manjunath Goudar
• [PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver   Manjunath Goudar
• [PATCH V5 6/9] USB: OHCI: make ohci-s3c2410 a separate driver   Manjunath Goudar
• [PATCH V5 7/9] USB: OHCI: make ohci-nxp a separate driver   Manjunath Goudar
• [PATCH V5 8/9] USB: OHCI: make ohci-ep93xx a separate driver   Manjunath Goudar
• [PATCH V5 9/9] USB: OHCI: make ohci-pxa27x a separate driver   Manjunath Goudar
• [PATCH V5 0/9] USB: OHCI: more bus glues as separate modules   Manjunath Goudar
• [PATCH V5 1/9] USB: OHCI: make ohci-exynos a separate driver   Manjunath Goudar
• [PATCH V5 2/9] USB: OHCI: make ohci-omap a separate driver   Manjunath Goudar
• [PATCH V5 3/9] USB: OHCI: make ohci-omap3 a separate driver   Manjunath Goudar
• [PATCH V5 4/9] USB: OHCI: make ohci-spear a separate driver   Manjunath Goudar
• [PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver   Manjunath Goudar
• [PATCH V5 6/9] USB: OHCI: make ohci-s3c2410 a separate driver   Manjunath Goudar
• [PATCH V5 7/9] USB: OHCI: make ohci-nxp a separate driver   Manjunath Goudar
• [PATCH V5 8/9] USB: OHCI: make ohci-ep93xx a separate driver   Manjunath Goudar
• [PATCH V5 9/9] USB: OHCI: make ohci-pxa27x a separate driver   Manjunath Goudar
• [PATCH V2] USB: EHCI: make ehci-w90X900 a separate driver   Manjunath Goudar
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Alexander Graf
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Alexander Graf
• [PATCH 1/3] arm: kvm: clamp NR_VCPUS to MAX_VCPUS   Alexander Graf
• [PATCH v4 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Alexander Graf
• [PATCH v4 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Alexander Graf
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Alexander Graf
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Alexander Graf
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Alexander Graf
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Alexander Graf
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Alexander Graf
• [PATCH v4 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Alexander Graf
• [Xen-devel] [PATCH v5 02/13] arm: introduce a global dma_ops pointer   Julien Grall
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Graeme Gregory
• [[PATCH] 0/3] imx-dma: fixes   Michael Grzeschik
• [[PATCH] 1/3] dma: imx-dma: fix slow path issue in prep_dma_cyclic   Michael Grzeschik
• [[PATCH] 2/3] dma: imx-dma: fix lockdep issue between irqhandler and tasklet   Michael Grzeschik
• [[PATCH] 3/3] dma: imx-dma: fix callback path in tasklet   Michael Grzeschik
• [[PATCH] 0/3] imx-dma: fixes   Michael Grzeschik
• [PATCH v3 1/3] ARM: Introduce atomic MMIO modify   Jason Gunthorpe
• [PATCH] arm: Kirkwood - Remove kirkwood_setup_wins and rely on the DT binding   Jason Gunthorpe
• [PATCH] arm: Kirkwood - Remove kirkwood_setup_wins and rely on the DT binding   Jason Gunthorpe
• [PATCH] arm: Kirkwood - Remove kirkwood_setup_wins and rely on the DT binding   Jason Gunthorpe
• [PATCH] bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties   Jason Gunthorpe
• ..   Jason Gunthorpe
• [PATCH 2/3] ARM: kirkwood: Move the crypto node under the mbus node   Jason Gunthorpe
• [PATCH 3/3] ARM: kirkwood: Move the nand node under the mbus node   Jason Gunthorpe
• [PATCH] bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties   Jason Gunthorpe
• [PATCH 2/3] ARM: kirkwood: Move the crypto node under the mbus node   Jason Gunthorpe
• [PATCH v2] bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties   Jason Gunthorpe
• Commit breaks strace: ARM: entry: allow ARM-private syscalls to be restarted   Jason Gunthorpe
• [PATCH 3/3] ARM: kirkwood: Move the nand node under the mbus node   Jason Gunthorpe
• [PATCH] ARM: entry: fix tracing of ARM-private syscalls   Jason Gunthorpe
• [PATCH v2 1/3] ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding (Was Re: ..)   Jason Gunthorpe
• [PATCH v2 1/3] ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding (Was Re: ..)   Jason Gunthorpe
• [PATCH 3/4] clk: kirkwood: Add CLK_IGNORE_UNUSED to ethernet ge0 and ge1 clocks   Jason Gunthorpe
• [PATCH 3/4] clk: kirkwood: Add CLK_IGNORE_UNUSED to ethernet ge0 and ge1 clocks   Jason Gunthorpe
• [PATCH] cpufreq: imx6q: Fix clock enable balance   Shawn Guo
• [PATCH v3 0/7] ARM: imx27 pinctrl   Shawn Guo
• [PATCH v3 0/7] ARM: imx27 pinctrl   Shawn Guo
• [PATCH v4 0/2]Add Freescale DSPI driver for Vybrid VF610 platform   Shawn Guo
• [PATCH] ARM: mxs: pm: Include "pm.h"   Shawn Guo
• pinctrl-mxs fails to parse function definitions from different .dts files   Shawn Guo
• [PATCH v3] ARM: imx6qdl-wandboard: Add spdif support   Shawn Guo
• [PATCH] ARM: imx: initialize clk_init_data.flags for clk-fixup-mux   Shawn Guo
• [PATCH v2 0/4] *** ARM: imx6sl: add FEC support for imx6sl evk platform ***   Shawn Guo
• [PATCH v2 1/4] ARM: dts: add iomuxc-gpr device node for imx6sl   Shawn Guo
• [PATCH 1/2] ARM: i.MX6: dts: change iomuxc pinctrl config to match Rev. 1 IMX6DQRM   Shawn Guo
• [PATCH 1/8] mmc: sdhci: add hooks for platform specific tuning   Shawn Guo
• [PATCH 3/8] sdhci: sdhci-esdhc-imx: support real clock on and off for imx6q   Shawn Guo
• [PATCH 4/8] sdhci: sdhci-esdhci-imx: add sd3.0 clock tuning support   Shawn Guo
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Shawn Guo
• [PATCH 8/8] ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3   Shawn Guo
• [PATCH v4 12/19] cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes   Shawn Guo
• [PATCH] ARM: mach-imx: clk-imx51-imx53: Fix 'spdif1_pred' clock registration   Shawn Guo
• [patch 1/1] imx51.dtsi: fix PATA device clock   Shawn Guo
• [PATCH v2 2/4] ARM: dts: add fec phy reset for imx6sl evk board   Shawn Guo
• [PATCH 1/2] ARM: dts: mx6: Add mx6solo support   Shawn Guo
• [PATCH v4 12/19] cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes   Shawn Guo
• [PATCH v2 2/4] ARM: dts: add fec phy reset for imx6sl evk board   Shawn Guo
• [PATCH 1/1] ARM: imx: mx6sl-evk: Enable USB function   Shawn Guo
• [PATCH v2 2/4] ARM: dts: add fec phy reset for imx6sl evk board   Shawn Guo
• [PATCH][RESEND] ARM: imx: remove IRQF_DISABLED   Shawn Guo
• [PATCH v4 12/19] cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes   Shawn Guo
• [PATCH 1/2] ARM: dts: mx6: Add mx6solo support   Shawn Guo
• [PATCH 0/4] cpufreq: fixes for v3.12   Shawn Guo
• [PATCH 1/4] cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device   Shawn Guo
• [PATCH 1/2] ARM: dts: imx53-qsb: add TVE entry   Shawn Guo
• [PATCH 1/2] ARM: dts: imx53-qsb: add TVE entry   Shawn Guo
• [PATCH v4 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q   Shawn Guo
• [PATCH v4 2/3] ARM: imx6q: Add PCIe bits to GPR syscon definition   Shawn Guo
• [PATCH] ARM: imx: i.mx6d/q: disable the double linefill feature of PL310   Shawn Guo
• [PATCH v4 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Shawn Guo
• [PATCH v5 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Shawn Guo
• [PATCH v5 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q   Shawn Guo
• [PATCH v2 1/1] ARM: imx: i.mx6d/q: disable the double linefill feature of PL310   Shawn Guo
• [PATCH] ARM: dts: imx6sl: Add spi aliases   Shawn Guo
• [PATCH v2 9/9] ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3   Shawn Guo
• [PATCH v4 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Shawn Guo
• [PATCH v6 0/3] Add PCIe support for i.MX6q   Shawn Guo
• [PATCH] ARM: dts: imx6q: fix the wrong offset of the Pad Mux register   Shawn Guo
• [GIT PULL] ARM: imx: fixes for 3.12   Shawn Guo
• [PATCH 16/26] ARM: mxs: remove custom .init_time hook   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabresd: SDHC ports are 8 bit-wide   Shawn Guo
• [PATCH] ARM: dts: imx28-evk: Enable touchscreen support   Shawn Guo
• mxsfb on i.MX28 uses bypassed ref_xtal 24MHz clock for LCD   Shawn Guo
• [PATCH] ARM: dts: add initial VF610 Cosmic/Cosmic+ board support   Shawn Guo
• [PATCH] clk: mxs: source LCD clock from PLL instead of from ref_xtal   Shawn Guo
• [PATCH v2] ARM: dts: add initial VF610 Cosmic/Cosmic+ board support   Shawn Guo
• [PATCH 0/5] ARM: imx6: export soc info via soc device   Shawn Guo
• [PATCH 1/5] ARM: imx: add soc revision helper functions   Shawn Guo
• [PATCH 2/5] ARM: imx6q: use common soc revision helpers   Shawn Guo
• [PATCH 3/5] ARM: imx: add a common function to initialize revision from anatop   Shawn Guo
• [PATCH 4/5] ARM: imx: use imx_init_revision_from_anatop() on imx6sl   Shawn Guo
• [PATCH 5/5] ARM: imx6: report soc info via soc device   Shawn Guo
• [PATCH] ARM: imx: remove stale mx53_display_revision() declaration   Shawn Guo
• [PATCH v7 0/2] Add PCIe support for i.MX6q   Shawn Guo
• [PATCH v7 1/2] ARM: imx6q: Add PCIe bits to GPR syscon definition   Shawn Guo
• [PATCH v7 2/2] PCI: imx6: Add support for i.MX6 PCIe controller   Shawn Guo
• [PATCH 0/3] ARM: imx6q: enable PCIe support   Shawn Guo
• [PATCH 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q   Shawn Guo
• [PATCH 2/3] ARM: imx6q: clock and Kconfig update for PCIe support   Shawn Guo
• [PATCH 3/3] ARM: dts: imx6qdl: add pcie device node   Shawn Guo
• [PATCH v2 0/9] mmc: sdhci-esdhc-imx: add SD3.0 support   Shawn Guo
• [PATCH 1/2] Documentation: Add device tree bindings for i.MX TVE   Shawn Guo
• [PATCH 2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree   Shawn Guo
• [PATCH 1/2] ARM: dts: mxs: Add muxing options for the SSP2 MMC   Shawn Guo
• [PATCH 2/2] ARM: dts: mxs: Add MSR M28CU3 board   Shawn Guo
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Shawn Guo
• device tree binding documentation outdated   Shawn Guo
• [PATCH 1/1] mmc: sdhci-of-esdhc: fix building error   Shawn Guo
• [PATCH] ARM: dts: imx6q-udoo: Add initial board support   Shawn Guo
• device tree binding documentation outdated   Shawn Guo
• device tree binding documentation outdated   Shawn Guo
• [PATCH v7 0/2] Add PCIe support for i.MX6q   Shawn Guo
• device tree binding documentation outdated   Shawn Guo
• device tree binding documentation outdated   Shawn Guo
• device tree binding documentation outdated   Shawn Guo
• [v1] ahci: imx: setup power saving methods   Shawn Guo
• [v1] ahci: imx: setup power saving methods   Shawn Guo
• [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog   Shawn Guo
• 回复：Re: [v1] ahci: imx: setup power saving methods   Shawn Guo
• [Question] Verification For arm64: suspend/resume implementation   Achin Gupta
• [Question] Verification For arm64: suspend/resume implementation   Achin Gupta
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Gupta, Pekon
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Gupta, Pekon
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Gupta, Pekon
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Gupta, Pekon
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Gupta, Pekon
• [PATCH 00/12] clk/exynos convert clock IDs to macros   Andrzej Hajda
• [PATCH 01/12] ARM: exynos4: create a DT header defining CLK IDs   Andrzej Hajda
• [PATCH 02/12] ARM: dts: exynos4: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH 03/12] clk: exynos4: replace clock ID private enums with IDs from DT header   Andrzej Hajda
• [PATCH 04/12] ARM: exynos5250: create a DT header defining CLK IDs   Andrzej Hajda
• [PATCH 05/12] ARM: dts: exynos5250: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH 06/12] clk: exynos5250: replace clock ID private enums with IDs from DT header   Andrzej Hajda
• [PATCH 07/12] ARM: exynos5420: create a DT header defining CLK IDs   Andrzej Hajda
• [PATCH 08/12] ARM: dts: exynos5420: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH 09/12] clk: exynos5420: replace clock ID private enums with IDs from DT header   Andrzej Hajda
• [PATCH 10/12] ARM: exynos5440: create a DT header defining CLK IDs   Andrzej Hajda
• [PATCH 11/12] ARM: dts: exynos5440: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH 12/12] clk: exynos5440: replace clock ID private enums with IDs from DT header   Andrzej Hajda
• [PATCH v2 00/12] clk/exynos convert clock IDs to macros   Andrzej Hajda
• [PATCH v2 01/12] ARM: exynos4: create a DT header defining CLK IDs   Andrzej Hajda
• [PATCH v2 02/12] ARM: dts: exynos4: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH v2 03/12] clk: exynos4: replace clock ID private enums with IDs from DT header   Andrzej Hajda
• [PATCH v2 04/12] ARM: exynos5250: create a DT header defining CLK IDs   Andrzej Hajda
• [PATCH v2 05/12] ARM: dts: exynos5250: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH v2 06/12] clk: exynos5250: replace clock ID private enums with IDs from DT header   Andrzej Hajda
• [PATCH v2 07/12] ARM: exynos5420: create a DT header defining CLK IDs   Andrzej Hajda
• [PATCH v2 08/12] ARM: dts: exynos5420: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH v2 09/12] clk: exynos5420: replace clock ID private enums with IDs from DT header   Andrzej Hajda
• [PATCH v2 10/12] ARM: exynos5440: create a DT header defining CLK IDs   Andrzej Hajda
• [PATCH v2 11/12] ARM: dts: exynos5440: convert magic numbers to macros in clock bindings   Andrzej Hajda
• [PATCH v2 12/12] clk: exynos5440: replace clock ID private enums with IDs from DT header   Andrzej Hajda
• [PATCH v2 00/12] clk/exynos convert clock IDs to macros   Andrzej Hajda
• [PATCH 5/7] staging: media/lirc: switch to use gpiolib   Krzysztof Halasa
• [PATCH 4/7] ptp: switch to use gpiolib   Krzysztof Halasa
• [PATCH 4/7] ptp: switch to use gpiolib   Krzysztof Halasa
• [PATCH 6/7] ARM: ixp4: delete irq_to_gpio   Krzysztof Halasa
• BUG: sleeping function called from invalid context at arch/arm/mm/fault.c:301   Krzysztof Halasa
• [PATCH] IXP4xx: Add Gateworks Cambria support.   Krzysztof Halasa
• [PATCH] iommu/arm-smmu: use devm_ioremap_resource() instead of devm_request_and_ioremap()   Jingoo Han
• [PATCH v4 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Jingoo Han
• [PATCH v4 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Jingoo Han
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Jingoo Han
• [PATCH] PCI: exynos: missing clk_disable_unprepare() on error in exynos_pcie_probe()   Jingoo Han
• [PATCH V3 0/4] mmc: mmci: Support ap_sleep in cpuidle for ux500   Ulf Hansson
• [PATCH V3 1/4] mmc: mmci: Adapt to new pinctrl handling   Ulf Hansson
• [PATCH V3 2/4] mmc: mmci: Use optional sleep pinctrl state   Ulf Hansson
• [PATCH V3 3/4] mmc: mmci: Adapt to register write restrictions   Ulf Hansson
• [PATCH V3 4/4] mmc: mmci: Save and restore register context   Ulf Hansson
• [PATCH V3 3/4] mmc: mmci: Adapt to register write restrictions   Ulf Hansson
• [PATCH V4 3/4] mmc: mmci: Adapt to register write restrictions   Ulf Hansson
• [PATCH 4/8] sdhci: sdhci-esdhci-imx: add sd3.0 clock tuning support   Ulf Hansson
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Ulf Hansson
• [PATCH 0/8] mmc: sdhci-esdhc-imx: add SD3.0 support   Ulf Hansson
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Ulf Hansson
• [PATCH 4/8] sdhci: sdhci-esdhci-imx: add sd3.0 clock tuning support   Ulf Hansson
• [PATCH 09/10] clk: ux500: Remove extra semicolon   Ulf Hansson
• [PATCH 17/27] mmc: wmt-sdmmc: Move away from using deprecated APIs   Ulf Hansson
• [PATCH 18/27] mmc: s3cmci: Remove redundant suspend and resume callbacks   Ulf Hansson
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Tim Harvey
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Tim Harvey
• [PATCHv2 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Sascha Hauer
• [PATCHv2 1/4] pwm: Add Freescale FTM PWM driver support   Sascha Hauer
• [PATCH v3 0/7] ARM: imx27 pinctrl   Sascha Hauer
• [PATCH] cpufreq: imx6q: Fix clock enable balance   Sascha Hauer
• [PATCHv2 1/4] pwm: Add Freescale FTM PWM driver support   Sascha Hauer
• [PATCH 8/8] ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3   Sascha Hauer
• [PATCH v2 2/4] ARM: dts: add fec phy reset for imx6sl evk board   Sascha Hauer
• [PATCHv3 1/4] pwm: Add Freescale FTM PWM driver support   Sascha Hauer
• [PATCHv3 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.   Sascha Hauer
• [PATCHv3 1/4] pwm: Add Freescale FTM PWM driver support   Sascha Hauer
• [PATCH][RESEND] ARM: imx: remove IRQF_DISABLED   Sascha Hauer
• [RFC PATCHv2 0/4] Add DT support for fixed PHYs   Sascha Hauer
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sascha Hauer
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sascha Hauer
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sascha Hauer
• [PATCH v5 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sascha Hauer
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Sascha Hauer
• [PATCHv4 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Sascha Hauer
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Sascha Hauer
• device tree binding documentation outdated   Sascha Hauer
• [PATCHv5 0/4] Add Freescale FTM PWM driver.   Sascha Hauer
• [PATCH] IXP4xx: Add Gateworks Cambria support.   Krzysztof Hałasa
• [PATCH] IXP4xx: Fix DMA masks.   Krzysztof Hałasa
• BUG: sleeping function called from invalid context at arch/arm/mm/fault.c:301   Krzysztof Hałasa
• BUG: sleeping function called from invalid context at arch/arm/mm/fault.c:301   Krzysztof Hałasa
• [PATCH] IXP4xx: Add Gateworks Cambria support.   Krzysztof Hałasa
• [PATCH] IXP4xx: Add Gateworks Cambria support.   Krzysztof Hałasa
• [PATCH v4 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Bjorn Helgaas
• [PATCH v7 0/2] Add PCIe support for i.MX6q   Bjorn Helgaas
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()   Tejun Heo
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()   Tejun Heo
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()   Tejun Heo
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Tejun Heo
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Tejun Heo
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Tejun Heo
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Tejun Heo
• [v1] ahci: imx: setup power saving methods   Tejun Heo
• 回复：Re: [v1] ahci: imx: setup power saving methods   Tejun Heo
• [PATCH v3 2/2] drivers: dma-contiguous: add initialization from device tree   Benjamin Herrenschmidt
• [PATCH v3 2/2] drivers: dma-contiguous: add initialization from device tree   Benjamin Herrenschmidt
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Benjamin Herrenschmidt
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Rob Herring
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Rob Herring
• [PATCH v5] ARM: Add check for Cortex-A15 errata 798181 ECO   Rob Herring
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Rob Herring
• [PATCH v2] ARM: highbank: fix debug uart virtual address for LPAE   Rob Herring
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Rob Herring
• [PATCH RFC] of: add a basic memory driver   Rob Herring
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Rob Herring
• [PATCH] memory: add a basic OF-based memory driver   Rob Herring
• [PATCH v3] dt: update PSCI binding documentation for v0.2   Rob Herring
• [PATCH 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Rob Herring
• [PATCH 2/2] Documentation: DT: arm: define CPU topology bindings   Rob Herring
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Rob Herring
• [PATCH] memory: add a basic OF-based memory driver   Rob Herring
• [PATCH] ARM: multi_v7: add HREFv60 to multi_v7 defconfig   Rob Herring
• [PATCH] ARM: multi_v7: add HREFv60 to multi_v7 defconfig   Rob Herring
• [PATCH] dts: Fix misspelling of Synopsys   Rob Herring
• [PATCH 11/28] arm: use early_init_dt_scan   Rob Herring
• [PATCH 12/28] arm64: use early_init_dt_scan   Rob Herring
• [PATCH 18/28] of: create default early_init_dt_add_memory_arch   Rob Herring
• [PATCH 19/28] arm: set initrd_start/initrd_end for fdt scan   Rob Herring
• [PATCH 20/28] arm64: set initrd_start/initrd_end for fdt scan   Rob Herring
• [PATCH 25/28] arm: use common of_flat_dt_match_machine   Rob Herring
• [PATCH 26/28] arm64: use common of_flat_dt_get_machine_name   Rob Herring
• [PATCH 18/28] of: create default early_init_dt_add_memory_arch   Rob Herring
• [PATCH 18/28] of: create default early_init_dt_add_memory_arch   Rob Herring
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Rob Herring
• [PATCH] ARM: move ARM errata 798181 declaration out of CONFIG_MMU   Rob Herring
• [PATCH v2 07/10] of/irq: Propagate errors in of_irq_to_resource_table()   Rob Herring
• [PATCH v2 04/10] irqdomain: Return errors from irq_create_of_mapping()   Rob Herring
• [PATCH v2 02/10] of/irq: Use irq_of_parse_and_map()   Rob Herring
• [PATCH v2 01/10] of/irq: Rework of_irq_count()   Rob Herring
• [PATCH] TTY: hvc_dcc: probe for a JTAG connection before registering   Rob Herring
• [PATCH] TTY: hvc_dcc: probe for a JTAG connection before registering   Rob Herring
• [PATCH v2] TTY: hvc_dcc: probe for a JTAG connection before registering   Rob Herring
• [PATCH v2 0/2] ARM DT cpus/cpu and topology bindings   Rob Herring
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Rob Herring
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Rob Herring
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Rob Herring
• [PATCH v2 0/2] ARM DT cpus/cpu and topology bindings   Rob Herring
• [PATCH v4 0/6] PSCI support for highbank   Rob Herring
• [PATCH 1/6] cpuidle: calxeda: add support to use PSCI calls   Rob Herring
• [PATCH 2/6] cpuidle: calxeda: add cpu_pm_enter/exit calls   Rob Herring
• [PATCH 3/6] cpuidle: calxeda: add ecx-2000 support   Rob Herring
• [PATCH 4/6] ARM: PSCI: remove unnecessary include of arm-gic.h   Rob Herring
• [PATCH 5/6] ARM: highbank: adapt to use ARM PSCI calls   Rob Herring
• [PATCH 6/6] dts: calxeda: add ARM PSCI binding   Rob Herring
• [PATCH 1/1] arm64: X-Gene AHBC platform bus driver   Rob Herring
• [PATCH] ASoC: generic: Add generic DT based simple codec   Rob Herring
• [PATCH 3/6] cpuidle: calxeda: add ecx-2000 support   Rob Herring
• [PATCH] ARM: highbank: cpuidle: convert to platform driver   Rob Herring
• [RFC PATCH 0/6] DRIVERS: IRQCHIP: Add support for crossbar IP   Rob Herring
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Rob Herring
• [PATCH 0/7]: iommu/arm-smmu: Misc fixes/adaptions   Andreas Herrmann
• [PATCH 1/7] iommu/arm-smmu: Switch to arch_initcall for driver registration   Andreas Herrmann
• [PATCH 2/7] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Andreas Herrmann
• [PATCH 3/7] ARM: dma-mapping: Always pass proper prot flags to iommu_map()   Andreas Herrmann
• [PATCH 4/7] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Andreas Herrmann
• [PATCH 5/7] iommu/arm-smmu: Add function that isolates all masters for all SMMUs   Andreas Herrmann
• [PATCH 6/7] iommu/arm-smmu: Add module parameter arm-smmu=off|force_isolation   Andreas Herrmann
• [PATCH 7/7] iommu/arm-smmu: Clear global and context bank fault status and syndrome registers   Andreas Herrmann
• [PATCH 1/7] iommu/arm-smmu: Switch to arch_initcall for driver registration   Andreas Herrmann
• [PATCH 3/7] ARM: dma-mapping: Always pass proper prot flags to iommu_map()   Andreas Herrmann
• [PATCH 2/7] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Andreas Herrmann
• [PATCH 7/7] iommu/arm-smmu: Clear global and context bank fault status and syndrome registers   Andreas Herrmann
• [PATCH 4/7] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Andreas Herrmann
• [PATCH 6/7] iommu/arm-smmu: Add module parameter arm-smmu=off|force_isolation   Andreas Herrmann
• [PATCH 7/7] iommu/arm-smmu: Clear global and context bank fault status and syndrome registers   Andreas Herrmann
• [PATCH 0/9] arm-smmu: Misc changes/Calxeda ECX-2000 support   Andreas Herrmann
• [PATCH 1/9] iommu/arm-smmu: Switch to arch_initcall for driver registration   Andreas Herrmann
• [PATCH 2/9] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Andreas Herrmann
• [PATCH 3/9] ARM: dma-mapping: Always pass proper prot flags to iommu_map()   Andreas Herrmann
• [PATCH 4/9] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Andreas Herrmann
• [PATCH 5/9] iommu/arm-smmu: Clear global and context bank fault status registers   Andreas Herrmann
• [PATCH 6/9] iommu/arm-smmu: Support buggy implemenations where all config accesses are secure   Andreas Herrmann
• [PATCH 7/9] iommu/arm-smmu: Add function that conditionally isolates all masters of all SMMUs   Andreas Herrmann
• [PATCH 8/9] iommu/arm-smmu: Introduce a default fault handler   Andreas Herrmann
• [PATCH 9/9] ARM: dts: Add nodes for SMMUs on Calxeda ECX-2000   Andreas Herrmann
• [PATCH 4/9] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Andreas Herrmann
• [PATCH 1/9] iommu/arm-smmu: Switch to arch_initcall for driver registration   Andreas Herrmann
• [PATCH] iommu/arm-smmu: Switch to subsys_initcall for driver registration   Andreas Herrmann
• [PATCH 2/9] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Andreas Herrmann
• [PATCH 4/9] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Andreas Herrmann
• [PATCH 8/9] iommu/arm-smmu: Introduce a default fault handler   Andreas Herrmann
• [PATCH 2/9] iommu/arm-smmu: Calculate SMMU_CB_BASE from smmu register values   Andreas Herrmann
• [PATCH 4/9] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Andreas Herrmann
• [PATCH 6/9] iommu/arm-smmu: Support buggy implemenations where all config accesses are secure   Andreas Herrmann
• [PATCH] iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception   Andreas Herrmann
• [PATCH] iommu/arm-smmu: Refine check for proper size of mapped region   Andreas Herrmann
• [PATCH] iommu/arm-smmu: Print context fault information   Andreas Herrmann
• [PATCH 5/9] iommu/arm-smmu: Clear global and context bank fault status registers   Andreas Herrmann
• [PATCH] iommu/arm-smmu: Clear global and context bank fault status registers   Andreas Herrmann
• [PATCH] iommu/arm-smmu: Clear global and context bank fault status registers   Andreas Herrmann
• [PATCH] iommu/arm-smmu: Clear global and context bank fault status registers   Andreas Herrmann
• [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT   Sebastian Hesselbarth
• [PATCH] clk: si5351: remove variant from platform_data   Sebastian Hesselbarth
• [PATCH RFC v2 01/16] ARM: call clk_of_init from time_init   Sebastian Hesselbarth
• [PATCH RFC v2 01/16] ARM: call clk_of_init from time_init   Sebastian Hesselbarth
• [PATCH RFC v2 13/16] ARM: tegra: split tegra_pmc_init() in two   Sebastian Hesselbarth
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Sebastian Hesselbarth
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Sebastian Hesselbarth
• [PATCH] arm: Kirkwood - Remove kirkwood_setup_wins and rely on the DT binding   Sebastian Hesselbarth
• [PATCH 2/3] ARM: kirkwood: Move the crypto node under the mbus node   Sebastian Hesselbarth
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Sebastian Hesselbarth
• [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init   Sebastian Hesselbarth
• [PATCH 02/26] clk: nomadik: move src init out of nomadik_clk_init   Sebastian Hesselbarth
• [PATCH 03/26] clk: nomadik: declare OF clock provider   Sebastian Hesselbarth
• [PATCH 04/26] clk: prima2: declare OF clock provider   Sebastian Hesselbarth
• [PATCH 05/26] ARM: socfgpa: prepare for arch-wide .init_time callback   Sebastian Hesselbarth
• [PATCH 06/26] clk: sunxi: declare OF clock provider   Sebastian Hesselbarth
• [PATCH 07/26] clk: vt8500: parse pmc_base from clock driver   Sebastian Hesselbarth
• [PATCH 08/26] ARM: vt8500: prepare for arch-wide .init_time callback   Sebastian Hesselbarth
• [PATCH 09/26] ARM: call of_clk_init from default time_init handler   Sebastian Hesselbarth
• [PATCH 10/26] ARM: bcm2835: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 11/26] ARM: dove: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 12/26] ARM: exynos: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 13/26] ARM: highbank: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 14/26] ARM: imx: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 15/26] ARM: kirkwood: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 16/26] ARM: mxs: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 17/26] ARM: nomadik: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 18/26] ARM: nspire: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 19/26] ARM: prima2: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 20/26] ARM: rockchip: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 21/26] ARM: socfpga: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 22/26] ARM: sti: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 23/26] ARM: sunxi: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 24/26] ARM: tegra: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 25/26] ARM: vexpress: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 26/26] ARM: vt8500: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Sebastian Hesselbarth
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Sebastian Hesselbarth
• [PATCH 04/26] clk: prima2: declare OF clock provider   Sebastian Hesselbarth
• [PATCH RESEND] clk: si5351: remove variant from platform_data   Sebastian Hesselbarth
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Sebastian Hesselbarth
• [PATCH 07/26] clk: vt8500: parse pmc_base from clock driver   Sebastian Hesselbarth
• [PATCH v2 07/26] clk: vt8500: parse pmc_base from clock driver   Sebastian Hesselbarth
• [PATCH 07/26] clk: vt8500: parse pmc_base from clock driver   Sebastian Hesselbarth
• [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init   Sebastian Hesselbarth
• [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init   Sebastian Hesselbarth
• [PATCH v2 01/26] ARM: nomadik: remove mtu initalization from .init_time   Sebastian Hesselbarth
• [PATCH 04/26] clk: prima2: declare OF clock provider   Sebastian Hesselbarth
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Sebastian Hesselbarth
• [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init   Sebastian Hesselbarth
• [PATCH 11/26] ARM: dove: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH v2 02/26] clk: nomadik: move src init out of nomadik_clk_init   Sebastian Hesselbarth
• [PATCH v2 03/26] clk: nomadik: declare OF clock provider   Sebastian Hesselbarth
• [PATCH v2 09/26] ARM: call of_clk_init from default time_init handler   Sebastian Hesselbarth
• [PATCH 11/26] ARM: dove: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 05/26] ARM: socfgpa: prepare for arch-wide .init_time callback   Sebastian Hesselbarth
• [PATCH 23/26] ARM: sunxi: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 12/26] ARM: exynos: remove custom .init_time hook   Sebastian Hesselbarth
• [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT   Sebastian Hesselbarth
• [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT   Sebastian Hesselbarth
• [PATCH 04/26] clk: prima2: declare OF clock provider   Sebastian Hesselbarth
• [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT   Sebastian Hesselbarth
• [GIT PULL] ARM: provide common arch init for DT clocks for v3.13   Sebastian Hesselbarth
• [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support   Kevin Hilman
• [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support   Kevin Hilman
• [PATCHv3 0/9] ARM: OMAP2+: AM33XX: Add suspend-resume support   Kevin Hilman
• [PATCH 0/3] ARM: PCI: versatile: fix irqs, I/O   Kevin Hilman
• [PATCHv3 7/8] mailbox/omap: add code to support the wkupm3 operations   Kevin Hilman
• [PATCH] ARM: omap2: throw the die id into the entropy pool   Kevin Hilman
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Kevin Hilman
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Kevin Hilman
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Kevin Hilman
• linux-next: manual merge of the arm-soc tree with the pm tree   Kevin Hilman
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   Kevin Hilman
• [GIT PULL 1/3] ARM: SoC drivers for v3.12   Kevin Hilman
• [GIT PULL 2/3] ARM: Renesas SoC cleanup, refactoring and more SMP support   Kevin Hilman
• [GIT PULL 3/3] ARM: SoC late changes for v3.12   Kevin Hilman
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   Kevin Hilman
• [PATCH] ARM: vexpress: allow dcscb and tc2_pm in a combined ARMv6+v7 build   Kevin Hilman
• [PATCH 1/2] ARM: dts: mx6: Add mx6solo support   Kevin Hilman
• Build error in torvalds kernel 3.11 for omap2plus   Kevin Hilman
• [PATCH 1/2] ARM: dts: mx6: Add mx6solo support   Kevin Hilman
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Kevin Hilman
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Kevin Hilman
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Kevin Hilman
• [PATCH v4 0/2] ARM: dts: Beaglebone MMC fixes   Kevin Hilman
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Kevin Hilman
• [PATCH v2 00/12] CPU idle for Armada XP   Kevin Hilman
• [PATCH] drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries   Kevin Hilman
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Kevin Hilman
• [PATCH v2] drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries   Kevin Hilman
• [PATCH] arm: Fix build error with context tracking calls   Kevin Hilman
• [PATCH] arm: Fix build error with context tracking calls   Kevin Hilman
• [PATCH 0/4] nohz/full: drop 64-bit requirement, enable ARM support   Kevin Hilman
• [PATCH 1/4] nohz_full: Kconfig: VIRT_CPU_ACCOUNTING_GEN: drop 64-bit requirement   Kevin Hilman
• [PATCH 2/4] nohz_full: Kconfig: drop requrement on 64-bit   Kevin Hilman
• [PATCH 3/4] full_nohz: Kconfig: add HAVE_VIRT_CPU_ACCOUNTING_GEN   Kevin Hilman
• [PATCH 4/4] ARM: Kconfig: allow full nohz CPU accounting   Kevin Hilman
• [PATCH 1/2] sched/nohz: add debugfs control over sched_tick_max_deferment   Kevin Hilman
• [PATCH 2/2] sched/nohz: fix overflow error in scheduler_tick_max_deferment()   Kevin Hilman
• [PATCH v6 1/5] ARM: add basic support for Trusted Foundations   Kevin Hilman
• [PATCH] arm: Fix build error with context tracking calls   Kevin Hilman
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Kevin Hilman
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Kevin Hilman
• [GIT PULL] ux500 fixes for v3.12   Kevin Hilman
• [GIT PULL] ux500 fixes for v3.12   Kevin Hilman
• [PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver   Kevin Hilman
• [PATCH 0/3] nohz full: drop 64-bit requirement, enable ARM support v2   Kevin Hilman
• [GIT PULL 1/2] DaVinci SoC updates for v3.12   Alexander Holler
• [GIT PULL 1/2] DaVinci SoC updates for v3.12   Alexander Holler
• [PATCH] ARM: davinci: fix build breakage with DEBUG_LL   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Alexander Holler
• [GIT PULL] DaVinci fixes for v3.12-rc   Alexander Holler
• [GIT PULL] DaVinci fixes for v3.12-rc   Alexander Holler
• [PATCH] ARM: shmobile: Add koelsch defconfig   Simon Horman
• [PATCH 00/04] ARM: shmobile: Initial r8a7791 SoC and Koelsch board support   Simon Horman
• [PATCH v2 00/03] ARM: shmobile: r8a7790 APMU SMP support   Simon Horman
• [PATCH v2 0/2] R8A7779/Marzen: HPB-DMAC support for SDHI0   Simon Horman
• [PATCH] ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> format   Simon Horman
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Simon Horman
• [GIT PULL] Third Round of Renesas ARM based SoC fixes for v3.12   Simon Horman
• [PATCH] ARM: shmobile: r8a7779: Update early timer initialisation order   Simon Horman
• [PATCH] ARM: shmobile: Add koelsch defconfig   Simon Horman
• [PATCH 00/04] ARM: shmobile: Initial r8a7791 SoC and Koelsch board support   Simon Horman
• [GIT PULL 3/3] ARM: shmobile: lager: enable Ether   Simon Horman
• [PATCH v2 0/4] Add Ether DT support for R8A7778/BOCK-W reference board   Simon Horman
• [PATCH 02/04] ARM: shmobile: r8a7791 SCIF support   Simon Horman
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Simon Horman
• [PATCH 02/04] ARM: shmobile: r8a7791 SCIF support   Simon Horman
• [PATCH] ARM: shmobile: lager: Do not use register_type field of struct sh_eth_plat_data   Simon Horman
• [PATCH v2 00/03] ARM: shmobile: r8a7790 APMU SMP support   Simon Horman
• [PATCH] ARM: shmobile: Break out R-Car Gen2 setup code   Simon Horman
• [PATCH] ARM: shmobile: Break out R-Car Gen2 setup code   Simon Horman
• [PATCH 00/05] ARM: shmobile: Use CPU notifiers for SCU boot vector code   Simon Horman
• [PATCH] Renesas clocksource fixes for v3.12   Simon Horman
• [PATCH] clocksource: em_sti: Set cpu_possible_mask to fix SMP broadcast   Simon Horman
• [PATCH] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup   Simon Horman
• [PATCH/RESEND 1/2] gpio: rcar: Remove #gpio-range-cells DT property usage   Simon Horman
• [PATCH] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup   Simon Horman
• [PATCH] ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> format   Simon Horman
• [PATCH/RESEND 1/2] gpio: rcar: Remove #gpio-range-cells DT property usage   Simon Horman
• [PATCH/RESEND 1/2] gpio: rcar: Remove #gpio-range-cells DT property usage   Simon Horman
• [PATCH 00/10] pwm-backlight: Add GPIO and power supply support   Simon Horman
• [PATCH 00/03] ARM: shmobile: Initial r7s72100 SoC and Genmai board support   Simon Horman
• [PATCH v2 4/4] ARM: shmobile: BOCK-W reference: add Ether PFC settings   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq   Simon Horman
• [PATCH] ARM: shmobile: Allow build of the MTU2 timer driver   Simon Horman
• [PATCH] ARM: shmobile: Break out R-Car Gen2 setup code   Simon Horman
• [PATCH] ARM: shmobile: r8a7791 IRQC support   Simon Horman
• [PATCH] ARM: shmobile: r8a7791 Architected timer support   Simon Horman
• [PATCH] ARM: shmobile: r8a7791 SMP support   Simon Horman
• [PATCH 00/10] pwm-backlight: Add GPIO and power supply support   Simon Horman
• [PATCH 06/10] ARM: shmobile: Initialize PWM backlight enable_gpio field   Simon Horman
• [PATCH v2 2/2] ARM: shmobile: Marzen: enable DMA for SDHI0   Simon Horman
• [PATCH] ARM: shmobile: Add r8a7790 thermal sensor DT device   Simon Horman
• [PATCH/RFC] ARM: shmobile: Add r8a7791 thermal sensor DT device   Simon Horman
• [PATCH] ARM: shmobile: Add r8a7791 Koelsch DT reference support   Simon Horman
• [PATCH] clocksource: em_sti: Set cpu_possible_mask to fix SMP broadcast   Simon Horman
• [PATCH] ARM: shmobile: Add r8a7790 thermal sensor DT device   Simon Horman
• [PATCH v2 4/4] ARM: shmobile: BOCK-W reference: add Ether PFC settings   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq   Simon Horman
• [PATCH] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup   Simon Horman
• [PATCH v2 4/4] ARM: shmobile: BOCK-W reference: add Ether PFC settings   Simon Horman
• [PATCH v2 1/2] ARM: shmobile: r8a7779: add HPB-DMAC support   Simon Horman
• [PATCH v4 1/2] ARM: shmobile: r8a7778: add HPB-DMAC support   Simon Horman
• [PATCH v4 2/2] ARM: shmobile: BOCK-W: enable DMA for SDHI0   Simon Horman
• [PATCH v2 2/2] ARM: shmobile: Marzen: enable DMA for SDHI0   Simon Horman
• [PATCH 0/2] Add CAN0 support for R8A7778/BOCK-W board   Simon Horman
• [PATCH 2/2] ARM: shmobile: marzen: enable HPB-DMAC in defconfig   Simon Horman
• [PATCH 1/2] ARM: shmobile: bockw: enable HPB-DMAC in defconfig   Simon Horman
• [GIT PULL 0/5] Fourth Round of Renesas ARM based SoC fixes for v3.12   Simon Horman
• [PATCH 1/5] ARM: shmobile: update SDHI DT compatibility string to the <unit>-<soc> format   Simon Horman
• [PATCH 2/5] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup   Simon Horman
• [PATCH 3/5] ARM: shmobile: armadillo: fixup ether pinctrl naming   Simon Horman
• [PATCH 4/5] gpio: rcar: Remove #gpio-range-cells DT property usage   Simon Horman
• [PATCH 5/5] ARM: shmobile: Remove #gpio-ranges-cells DT property   Simon Horman
• [GIT PULL 0/3] Renesas ARM based SoC cleanups for v3.13   Simon Horman
• [PATCH 1/3] ARM: shmobile: Rename to r8a73a4_init_early()   Simon Horman
• [PATCH 2/3] ARM: shmobile: Rename to r8a7790_init_early()   Simon Horman
• [PATCH 3/3] ARM: shmobile: r8a7790: Constify platform data and resources   Simon Horman
• [GIT PULL 0/8] Renesas ARM based SoC updates for v3.13   Simon Horman
• [PATCH 1/8] ARM: shmobile: r8a7779: Rename DU device in clock lookups list   Simon Horman
• [PATCH 2/8] ARM: shmobile: r8a7790: Add DU and LVDS clocks   Simon Horman
• [PATCH 3/8] ARM: shmobile: r8a7778: add SSI/SRU clock support   Simon Horman
• [PATCH 4/8] ARM: shmobile: Initial r8a7791 SoC support   Simon Horman
• [PATCH 5/8] ARM: shmobile: r8a7791 SCIF support   Simon Horman
• [PATCH 6/8] ARM: shmobile: r8a7791 CMT support   Simon Horman
• [PATCH 7/8] ARM: shmobile: r8a7778: add USBHS clock   Simon Horman
• [PATCH 8/8] ARM: shmobile: r8a7778: add usb phy power control function   Simon Horman
• [PATCH 01/14] ARM: shmobile: Introduce shmobile_smp_cpu_disable()   Simon Horman
• [PATCH 02/14] ARM: shmobile: Use shmobile_smp_cpu_disable() on sh73a0   Simon Horman
• [PATCH 03/14] ARM: shmobile: Remove unused shmobile_smp_init_cpus()   Simon Horman
• [GIT PULL 00/14] Renesas ARM based SoC SMP updates for v3.13   Simon Horman
• [PATCH 04/14] ARM: shmobile: Expose shmobile_invalidate_start()   Simon Horman
• [PATCH 05/14] ARM: shmobile: Introduce shmobile_boot_size   Simon Horman
• [PATCH 06/14] ARM: shmobile: Shared APMU SMP support code without DT   Simon Horman
• [PATCH 07/14] ARM: shmobile: Add r8a7790 SMP support using APMU code   Simon Horman
• [PATCH 08/14] ARM: shmobile: Add CPU notifier based SCU boot vector code   Simon Horman
• [PATCH 09/14] ARM: shmobile: Let sh73a0 rely on SCU CPU notifier   Simon Horman
• [PATCH 10/14] ARM: shmobile: Let EMEV2 rely on SCU CPU notifier   Simon Horman
• [PATCH 11/14] ARM: shmobile: Let r8a7779 rely on SCU CPU notifier   Simon Horman
• [PATCH 12/14] ARM: shmobile: Remove shmobile_smp_scu_boot_secondary()   Simon Horman
• [PATCH 13/14] ARM: shmobile: Extend APMU code to allow single cluster only   Simon Horman
• [PATCH 14/14] ARM: shmobile: Include CA7 cores in APMU table   Simon Horman
• [GIT PULL 00/12] Renesas ARM based SoC board updates for v3.13   Simon Horman
• [PATCH 01/12] ARM: shmobile: marzen: Add Display Unit support   Simon Horman
• [PATCH 02/12] ARM: shmobile: lager: Add Display Unit support   Simon Horman
• [PATCH 03/12] ARM: shmobile: ape6evm: update MMC0, SDHI0 and SDHI1 with correct regulators   Simon Horman
• [PATCH 04/12] ARM: shmobile: lager: Fix Display Unit platform data   Simon Horman
• [PATCH 05/12] ARM: shmobile: bockw: enable global use of FPGA   Simon Horman
• [PATCH 06/12] ARM: shmobile: bockw: add R-Car sound support (PIO)   Simon Horman
• [PATCH 07/12] ARM: shmobile: Koelsch support   Simon Horman
• [PATCH 08/12] ARM: shmobile: bockw: add USB Function support   Simon Horman
• [PATCH 09/12] ARM: shmobile: ape6evm: disable MMCIF Command Completion Signal   Simon Horman
• [PATCH 10/12] ARM: shmobile: armadillo800eva: disable MMCIF Command Completion Signal   Simon Horman
• [PATCH 11/12] ARM: shmobile: kzm9g: disable MMCIF Command Completion Signal   Simon Horman
• [PATCH 12/12] ARM: shmobile: lager: disable MMCIF Command Completion Signal, add CLK_CTRL2   Simon Horman
• [GIT PULL 0/4] Renesas ARM based SoC defconfig updates for v3.13   Simon Horman
• [PATCH 1/4] ARM: shmobile: marzen: Select DRM_RCAR_DU in defconfig   Simon Horman
• [PATCH 2/4] ARM: shmobile: lager: Select DRM_RCAR_DU in defconfig   Simon Horman
• [PATCH 3/4] ARM: shmobile: bockw defconfig: add Sound support   Simon Horman
• [PATCH 4/4] ARM: shmobile: Add koelsch defconfig   Simon Horman
• [GIT PULL 0/3] Renesas ARM-based SoC DT updates for v3.13   Simon Horman
• [PATCH 1/3] ARM: shmobile: ape6evm-reference: add MMCIF and SDHI DT nodes   Simon Horman
• [PATCH 2/3] ARM: shmobile: Add r8a7790 CA15 CPU cores   Simon Horman
• [PATCH 3/3] ARM: shmobile: Add r8a7790 CA7 CPU cores to DTSI   Simon Horman
• [PATCH v2] ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag   Simon Horman
• [PATCH v3 0/5] ARM: vf610: Add DCU framebuffer driver for Vybrid VF610 platform   Wang Huan-B18965
• [PATCH v3 0/5] ARM: vf610: Add DCU framebuffer driver for Vybrid VF610 platform   Wang Huan-B18965
• [PATCH v3 0/5] ARM: vf610: Add DCU framebuffer driver for Vybrid VF610 platform   Wang Huan-B18965
• [PATCH 0/2] Remodel Tegra cpufreq driver to support Tegra series SoCs   Bill Huang
• [PATCH 1/2] cpufreq: tegra: Remove not used header and clean up codes   Bill Huang
• [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver   Bill Huang
• [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver   Bill Huang
• [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver   Bill Huang
• [PATCH v2 0/4] Remodel Tegra cpufreq driver to support Tegra series SoCs   Bill Huang
• [PATCH v2 1/4] cpufreq: tegra: Call tegra_cpufreq_init() specifically in machine code   Bill Huang
• [PATCH v2 2/4] cpufreq: tegra: Remove not used header files and clean up codes   Bill Huang
• [PATCH v2 3/4] cpufreq: tegra: Re-model Tegra cpufreq driver   Bill Huang
• [PATCH v2 4/4] ARM: tegra: defconfig updates   Bill Huang
• [PATCH v2 3/4] cpufreq: tegra: Re-model Tegra cpufreq driver   Bill Huang
• [PATCH 01/51] DMA-API: provide a helper to set both DMA and coherent DMA masks   Ben Hutchings
• [PATCH 0/7] Make dwc3 use Generic PHY Framework and misc cleanup   Kishon Vijay Abraham I
• [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY   Kishon Vijay Abraham I
• [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH 3/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH 4/7] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/omap-phy.txt   Kishon Vijay Abraham I
• [PATCH 5/7] phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/   Kishon Vijay Abraham I
• [PATCH 6/7] arm/dts: added dt properties to adapt to the new phy framwork   Kishon Vijay Abraham I
• [PATCH 7/7] drivers: phy: renamed struct omap_control_usb to struct omap_control_phy   Kishon Vijay Abraham I
• [PATCH v11 0/8] PHY framework   Kishon Vijay Abraham I
• [PATCH v11 0/8] PHY framework   Kishon Vijay Abraham I
• [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH 3/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework   Kishon Vijay Abraham I
• [PATCH 4/7] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/omap-phy.txt   Kishon Vijay Abraham I
• [PATCH 7/7] drivers: phy: renamed struct omap_control_usb to struct omap_control_phy   Kishon Vijay Abraham I
• [PATCH v11 0/8] PHY framework   Kishon Vijay Abraham I
• [PATCH v12 0/7] PHY framework   Kishon Vijay Abraham I
• [PATCH v12 1/7] drivers: phy: add generic PHY framework   Kishon Vijay Abraham I
• [PATCH v12 2/7] usb: phy: omap-usb2: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v12 3/7] usb: phy: twl4030: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v12 4/7] arm: omap3: twl: add phy consumer data in twl4030_usb_data   Kishon Vijay Abraham I
• [PATCH v12 5/7] ARM: dts: omap: update usb_otg_hs data   Kishon Vijay Abraham I
• [PATCH v12 6/7] usb: musb: omap2430: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v12 7/7] usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops   Kishon Vijay Abraham I
• [PATCH v11 2/8] usb: phy: omap-usb2: use the new generic PHY framework   Kishon Vijay Abraham I
• [PATCH v12 0/7] PHY framework   Kishon Vijay Abraham I
• [PATCH] ARM: mach-iop32x: iq31244: Replace if-then-else with a switch statement   Valentin Ilie
• [PATCH] ARM: mach-iop32x: iq31244: Replace if-then-else with a switch statement   Valentin Ilie
• [PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Ivan T. Ivanov
• [PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Ivan T. Ivanov
• [PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Ivan T. Ivanov
• [PATCH 28/51] DMA-API: sound: fix dma mask handling in a lot of drivers   Takashi Iwai
• [PATCH 28/51] DMA-API: sound: fix dma mask handling in a lot of drivers   Takashi Iwai
• [PATCH 28/51] DMA-API: sound: fix dma mask handling in a lot of drivers   Takashi Iwai
• [PATCH v2] watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI   Romain Izard
• [PATCH v2] watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI   Romain Izard
• [PATCH v2] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Mark Jackson
• [PATCH v2] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Mark Jackson
• [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13   Mark Jackson
• [PATCH v3] Add support for Newflow NanoBone board   Mark Jackson
• kmalloc memory slower than malloc   Thommy Jakobsson
• kmalloc memory slower than malloc   Thommy Jakobsson
• kmalloc memory slower than malloc   Thommy Jakobsson
• kmalloc memory slower than malloc   Thommy Jakobsson
• kmalloc memory slower than malloc   Thommy Jakobsson
• kmalloc memory slower than malloc   Thommy Jakobsson
• kmalloc memory slower than malloc   Thommy Jakobsson
• kmalloc memory slower than malloc   Thommy Jakobsson
• kmalloc memory slower than malloc   Thommy Jakobsson
• [PATCH] dts: Fix misspelling of Synopsys   Seungwon Jeon
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [PATCH v5 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [PATCH 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [PATCH 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [PATCH 3/3] dma: Add Freescale eDMA engine driver support   Lu Jingchang-B35083
• [GIT PULL V2 2/2] ARM: mvebu: MSI mvebu changes for v3.12   Olof Johansson
• [GIT PULL] ARM: OMAP: Device Tree for 3.12 take #2   Olof Johansson
• [GIT PULL V2 2/2] ARM: mvebu: MSI mvebu changes for v3.12   Olof Johansson
• [GIT PULL V2 2/2] ARM: mvebu: MSI mvebu changes for v3.12   Olof Johansson
• [PATCH] ARM: pxa: ssp: Check return values from phandle lookups   Olof Johansson
• [PATCH] net: stmmac: fix bad merge conflict resolution   Olof Johansson
• [GIT PULL 0/5] ARM: SoC updates for 3.12   Olof Johansson
• [GIT PULL 1/5] ARM: SoC low-priority fixes for 3.12   Olof Johansson
• [GIT PULL 2/5] ARM: SoC cleanups for 3.12   Olof Johansson
• [GIT PULL 3/5] ARM: SoC DT updates for 3.12   Olof Johansson
• [GIT PULL 4/5] ARM: SoC platform changes for 3.12   Olof Johansson
• [GIT PULL 5/5] ARM: SoC board updates for 3.12   Olof Johansson
• [GIT PULL 3/3] ARM: shmobile: lager: enable Ether   Olof Johansson
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Olof Johansson
• [PATCH] ARM: shmobile: lager: Do not use register_type field of struct sh_eth_plat_data   Olof Johansson
• [GIT PULL] Third Round of Renesas ARM based SoC fixes for v3.12   Olof Johansson
• [PATCH 0/3] ARM: PCI: versatile: fix irqs, I/O   Olof Johansson
• [PATCH] ARM: vexpress: allow dcscb and tc2_pm in a combined ARMv6+v7 build   Olof Johansson
• [PATCH 1/2] ARM: integrator_cp: Set LCD{0,1} enable lines when turning on CLCD   Olof Johansson
• [GIT PULL] ARM: mvebu: fixes-non-critical for v3.12 (last one)   Olof Johansson
• [PATCH 07/38] ARM: ux500: CONFIG: Enable ST's IIO Accelerometer Sensors by default   Olof Johansson
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Olof Johansson
• [PATCH 07/38] ARM: ux500: CONFIG: Enable ST's IIO Accelerometer Sensors by default   Olof Johansson
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Olof Johansson
• [GIT PULL] ep93xx-fixes for 3.12   Olof Johansson
• [GIT PULL] ep93xx-devel for 3.12   Olof Johansson
• [PATCH] mtd: nand: pxa3xx: Add pxa3xx_nand_get_variant() stub for !CONFIG_OF   Olof Johansson
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Olof Johansson
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Olof Johansson
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Olof Johansson
• [PATCH 0/4] ARM: sun7i: Enable EMAC support for the A20   Olof Johansson
• [PATCH] dma: use %pa to print dma_addr_t   Olof Johansson
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Olof Johansson
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Olof Johansson
• [PATCH] dma: use %pa to print dma_addr_t   Olof Johansson
• [PATCH] dma: use %pa to print dma_addr_t   Olof Johansson
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Olof Johansson
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Olof Johansson
• [PATCH 0/4] ARM: sun7i: Enable EMAC support for the A20   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Olof Johansson
• More build reports   Olof Johansson
• [PATCH] memory: add a basic OF-based memory driver   Olof Johansson
• [PATCH] memory: add a basic OF-based memory driver   Olof Johansson
• [PATCH 0/2] WLAN regression fixes for omap4 after moving to DT based booting   Olof Johansson
• [PATCH 0/6] deletion of the Shark machine   Olof Johansson
• [PATCH] ARM: multi_v7: add HREFv60 to multi_v7 defconfig   Olof Johansson
• [PATCH] ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT   Olof Johansson
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Olof Johansson
• [PATCH] ARM: ux500: disable outer cache debug   Olof Johansson
• [PATCH] dts: Fix misspelling of Synopsys   Olof Johansson
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Olof Johansson
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Olof Johansson
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Olof Johansson
• [GIT PULL] ARM: imx: fixes for 3.12   Olof Johansson
• [PATCH] ARM: u300: hide submenus   Olof Johansson
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Olof Johansson
• [PATCH] ARM: multi_v7: add HREFv60 to multi_v7 defconfig   Olof Johansson
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Olof Johansson
• [PATCH] ARM: shmobile: Allow build of the MTU2 timer driver   Olof Johansson
• [GIT PULL 1/2] omap fixes against v3.12-rc1   Olof Johansson
• [GIT PULL 2/2] omap dt fixes against v3.12-rc1   Olof Johansson
• Tegra baseline test results for v3.12-rc1   Olof Johansson
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Olof Johansson
• [GIT PULL] Removeal of 0x's from DT address spaces   Olof Johansson
• [GIT PULL] DaVinci fixes for v3.12-rc   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Olof Johansson
• [PATCH] ARM: tegra_defconfig: enable CONFIG_ARM_APPENDED_DTB   Olof Johansson
• [PATCH] ARM: tegra_defconfig: enable CONFIG_ARM_APPENDED_DTB   Olof Johansson
• [PATCH] ARM: tegra_defconfig: enable CONFIG_ARM_APPENDED_DTB   Olof Johansson
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Olof Johansson
• [ARM attend] Any news on agenda? Device tree documentation discussion   Olof Johansson
• [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor   Olof Johansson
• [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor   Olof Johansson
• [GIT PULL] ARM: mvebu: fixes for v3.12   Olof Johansson
• [GIT PULL v2] DaVinci fixes for v3.12-rc2   Olof Johansson
• [GIT PULL] DaVinci fixes for v3.12-rc   Olof Johansson
• [PATCH] rename ARCH_BCM to ARCH_BCM_MOBILE   Olof Johansson
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Olof Johansson
• "ASoC: ab8500: Convert register I/O to regmap" breaks snowball   Olof Johansson
• General placement of platform drivers and header files   Olof Johansson
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Olof Johansson
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Olof Johansson
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Olof Johansson
• [GIT PULL] at91: fixes for 3.12 #1   Olof Johansson
• [GIT PULL] ux500 fixes for v3.12   Olof Johansson
• [GIT PULL 1/2] Samsung Common CLK for S3C64XX   Olof Johansson
• [GIT PULL 2/2] Samsung DT for S3C64XX   Olof Johansson
• [GIT PULL] Nomadik AUXDATA removal   Olof Johansson
• [GIT PULL] ux500 device tree changes for v3.13 take 1   Olof Johansson
• [GIT PULL] delete the Shark machine for v3.13   Olof Johansson
• [PATCH] arm: mach-integrator: Add stub for pci_v3_early_init() for !CONFIG_PCI   Olof Johansson
• [PATCH v6 RESEND 0/5] ARM/ARM64 architected timer updates   Olof Johansson
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Olof Johansson
• [PATCH] ARM: multi_v7_defconfig: add SDHCI for i.MX   Olof Johansson
• [PATCH v6 07/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Olof Johansson
• [GIT PULL] ux500 device tree changes for v3.13 take 2   Olof Johansson
• [GIT PULL]ARM: sirf: dts fixes for 3.12-rc   Olof Johansson
• [GIT PULL] ux500 device tree changes for v3.13 take 2   Olof Johansson
• [GIT PULL 0/5] Fourth Round of Renesas ARM based SoC fixes for v3.12   Olof Johansson
• [PATCH v2] arm: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down   Olof Johansson
• [PATCH 1/2] MAINTAINERS: ARM: SIRF: add missed drivers into maintain list   Olof Johansson
• [PATCH 2/2] MAINTAINERS: ARM: SIRF: use kernel.org mail box   Olof Johansson
• [GIT PULL] at91: fixes for 3.12 #2   Olof Johansson
• [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8   Andrew Jones
• [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8   Andrew Jones
• [PATCH 0/3] KVM_MAX_VCPUS related changes   Andrew Jones
• [PATCH 1/3] arm: kvm: clamp NR_VCPUS to MAX_VCPUS   Andrew Jones
• [PATCH 2/3] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Andrew Jones
• [PATCH 3/3] aarch64: kvm: introduce CONFIG_KVM_MAX_VCPUS   Andrew Jones
• [PATCH 1/3] arm: kvm: clamp NR_VCPUS to MAX_VCPUS   Andrew Jones
• [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8   Andrew Jones
• [PATCH v2] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Andrew Jones
• [PATCH v2] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Andrew Jones
• [GIT PULL] Final pull-request due for the v3.12 merge window   Lee Jones
• [PATCH 00/11] iio: ST clean-ups and new pressure sensor device   Lee Jones
• [PATCH 01/11] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Lee Jones
• [PATCH 02/11] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Lee Jones
• [PATCH 03/11] ARM: ux500: CONFIG: Enable ST's IIO Pressure Sensors by default   Lee Jones
• [PATCH 04/11] iio: pressure-i2c: st: Simplify error checking in probe()   Lee Jones
• [PATCH 05/11] iio: pressure-core: st: Describe LPS331AP defines by name   Lee Jones
• [PATCH 06/11] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Lee Jones
• [PATCH 07/11] iio: sensors-core: st: Allow full-scale to be an optional feature   Lee Jones
• [PATCH 08/11] iio: pressure-core: st: Allow for number of channels to vary   Lee Jones
• [PATCH 09/11] iio: pressure-core: st: Clean-up error handling in probe function   Lee Jones
• [PATCH 10/11] iio: pressure: st: Add support for new LPS001WP pressure sensor   Lee Jones
• [PATCH 11/11] iio: pressure-core: st: Provide correct regulator support   Lee Jones
• [PATCH 11/11] iio: pressure-core: st: Provide correct regulator support   Lee Jones
• [PATCH 02/11] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Lee Jones
• [PATCH 02/11] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Lee Jones
• [PATCH v2 02/11] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Lee Jones
• [PATCH 04/11] iio: pressure-i2c: st: Simplify error checking in probe()   Lee Jones
• [PATCH 06/11] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Lee Jones
• [PATCH 05/11] iio: pressure-core: st: Describe LPS331AP defines by name   Lee Jones
• [PATCH 06/11] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Lee Jones
• [PATCH v2 00/14] iio: ST clean-ups and new pressure sensor device   Lee Jones
• [PATCH 01/14] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Lee Jones
• [PATCH 02/14] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Lee Jones
• [PATCH 03/14] ARM: ux500: CONFIG: Enable ST's IIO Pressure Sensors by default   Lee Jones
• [PATCH 04/14] iio: pressure-core: st: Describe LPS331AP defines by name   Lee Jones
• [PATCH 05/14] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Lee Jones
• [PATCH 06/14] iio: sensors-core: st: Allow full-scale to be an optional feature   Lee Jones
• [PATCH 07/14] iio: pressure-core: st: Allow for number of channels to vary   Lee Jones
• [PATCH 08/14] iio: pressure-core: st: Clean-up probe() function   Lee Jones
• [PATCH 09/14] iio: pressure: st: Add support for new LPS001WP pressure sensor   Lee Jones
• [PATCH 10/14] iio: pressure-core: st: Provide support for the Vdd power supply   Lee Jones
• [PATCH 11/14] iio: pressure-core: st: Provide support for the Vdd_IO power supply   Lee Jones
• [PATCH 12/14] Documentation: dt: i2c: Add LPS001WP to the Trivial Devices list   Lee Jones
• [PATCH 13/14] iio: sensors-core: st: Clean-up error handling in st_sensors_init_sensor()   Lee Jones
• [PATCH 14/14] iio: sensors-core: st: Support sensors which don't have a Data Ready pin   Lee Jones
• [PATCH v2 12/14] Documentation: dt: iio: Add binding for LPS001WP   Lee Jones
• [PATCH v3 00/38] iio: ST clean-ups and new sensor support   Lee Jones
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Lee Jones
• [PATCH 02/38] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Lee Jones
• [PATCH 03/38] ARM: ux500: Enable the LSM303DLH Accelerator sensor from DT   Lee Jones
• [PATCH 04/38] ARM: ux500: Enable the LSM303DLH Magnetometer sensor from DT   Lee Jones
• [PATCH 05/38] ARM: ux500: Enable the L3G4200D Gyroscope sensor from DT   Lee Jones
• [PATCH 06/38] ARM: ux500: CONFIG: Enable ST's IIO Pressure Sensors by default   Lee Jones
• [PATCH 07/38] ARM: ux500: CONFIG: Enable ST's IIO Accelerometer Sensors by default   Lee Jones
• [PATCH 08/38] ARM: ux500: CONFIG: Enable ST's IIO Magnetometer Sensors by default   Lee Jones
• [PATCH 09/38] ARM: ux500: CONFIG: Enable ST's IIO Gyroscope Sensors by default   Lee Jones
• [PATCH 10/38] Documentation: dt: iio: Add binding for LPS001WP   Lee Jones
• [PATCH 11/38] Documentation: dt: iio: Add binding for LSM303DLH   Lee Jones
• [PATCH 12/38] Documentation: dt: iio: Add binding for L3G4200D   Lee Jones
• [PATCH 13/38] Documentation: dt: iio: Add binding for LSM303DLH   Lee Jones
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Lee Jones
• [PATCH 15/38] iio: gyro: st: Append _gyro to gyroscope sensor device names   Lee Jones
• [PATCH 16/38] iio: magn: st: Append _magn to magnetometer sensor device names   Lee Jones
• [PATCH 17/38] iio: press: st: Append _press to pressure sensor device names   Lee Jones
• [PATCH 18/38] iio: sensors-core: st: Allow full-scale to be an optional feature   Lee Jones
• [PATCH 19/38] iio: sensors-core: st: Support sensors which don't have a Data Ready pin   Lee Jones
• [PATCH 20/38] iio: sensors-core: st: Clean-up error handling in st_sensors_init_sensor()   Lee Jones
• [PATCH 21/38] iio: sensors-core: st: Clean-up error handling in st_sensors_read_axis_data()   Lee Jones
• [PATCH 22/38] iio: sensors-core: st: Clean-up error handling in st_sensors_read_info_raw()   Lee Jones
• [PATCH 23/38] iio: pressure-core: st: Describe LPS331AP defines by name   Lee Jones
• [PATCH 24/38] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor   Lee Jones
• [PATCH 25/38] iio: pressure-core: st: Allow for number of channels to vary   Lee Jones
• [PATCH 26/38] iio: pressure-core: st: Clean-up probe() function   Lee Jones
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Lee Jones
• [PATCH 28/38] iio: pressure: st: Add support for new LPS001WP pressure sensor   Lee Jones
• [PATCH 29/38] iio: pressure-core: st: Provide support for the Vdd power supply   Lee Jones
• [PATCH 30/38] iio: pressure-core: st: Provide support for the Vdd_IO power supply   Lee Jones
• [PATCH 31/38] iio: accel-core: st: Clean up error handling in probe()   Lee Jones
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Lee Jones
• [PATCH 33/38] iio: accel-core: st: Give some indication if device probing was successful   Lee Jones
• [PATCH 34/38] iio: gyro-core: st: Clean up error handling in probe()   Lee Jones
• [PATCH 35/38] iio: gyro-core: st: Give some indication if device probing was successful   Lee Jones
• [PATCH 36/38] iio: magn-core: st: Clean up error handling in probe()   Lee Jones
• [PATCH 37/38] iio: magn-core: st: Give some indication if device probing was successful   Lee Jones
• [PATCH 38/38] iio: magn-core: st: Provide support for the LSM303DLH   Lee Jones
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Lee Jones
• [PATCH 07/38] ARM: ux500: CONFIG: Enable ST's IIO Accelerometer Sensors by default   Lee Jones
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Lee Jones
• [PATCH 26/38] iio: pressure-core: st: Clean-up probe() function   Lee Jones
• [PATCH 07/38] ARM: ux500: CONFIG: Enable ST's IIO Accelerometer Sensors by default   Lee Jones
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Lee Jones
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Lee Jones
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Lee Jones
• [PATCH 21/33] clk: ux500: Add Device Tree support for the PRCC Kernel clock   Lee Jones
• [PATCH 38/38] iio: magn-core: st: Provide support for the LSM303DLH   Lee Jones
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Lee Jones
• [PATCH 25/38] iio: pressure-core: st: Allow for number of channels to vary   Lee Jones
• [PATCH 21/38] iio: sensors-core: st: Clean-up error handling in st_sensors_read_axis_data()   Lee Jones
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Lee Jones
• [PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful   Lee Jones
• [PATCH 38/38] iio: magn-core: st: Provide support for the LSM303DLH   Lee Jones
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Lee Jones
• [PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group   Lee Jones
• [PATCH 38/38] iio: magn-core: st: Provide support for the LSM303DLH   Lee Jones
• [PATCH 38/38] iio: magn-core: st: Provide support for the LSM303DLH   Lee Jones
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Lee Jones
• [PATCH v4 00/20] iio: ST clean-ups and new sensor support   Lee Jones
• [PATCH 01/20] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Lee Jones
• [PATCH 02/20] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Lee Jones
• [PATCH 03/20] ARM: ux500: Enable the LSM303DLH Accelerator sensor from DT   Lee Jones
• [PATCH 04/20] ARM: ux500: Enable the LSM303DLH Magnetometer sensor from DT   Lee Jones
• [PATCH 05/20] ARM: ux500: Enable the L3G4200D Gyroscope sensor from DT   Lee Jones
• [PATCH 06/20] ARM: ux500: CONFIG: Enable ST's IIO Sensors by default   Lee Jones
• [PATCH 07/20] Documentation: dt: iio: Add binding for LPS001WP   Lee Jones
• [PATCH 08/20] Documentation: dt: iio: Add binding for LSM303DLH - Accel   Lee Jones
• [PATCH 09/20] Documentation: dt: iio: Add binding for L3G4200D   Lee Jones
• [PATCH 10/20] Documentation: dt: iio: Add binding for LSM303DLH - Magn   Lee Jones
• [PATCH 11/20] iio: sensors-core: st: Support sensors which don't have a Data Ready pin   Lee Jones
• [PATCH 12/20] iio: sensors-core: st: Clean-up error handling in st_sensors_init_sensor()   Lee Jones
• [PATCH 13/20] iio: sensors-core: st: Clean-up error handling in st_sensors_read_axis_data()   Lee Jones
• [PATCH 14/20] iio: pressure-core: st: Clean-up probe() function   Lee Jones
• [PATCH 15/20] iio: pressure: st: Add support for new LPS001WP pressure sensor   Lee Jones
• [PATCH 16/20] iio: pressure-core: st: Provide support for the Vdd power supply   Lee Jones
• [PATCH 17/20] iio: pressure-core: st: Provide support for the Vdd_IO power supply   Lee Jones
• [PATCH 18/20] iio: accel-core: st: Clean up error handling in probe()   Lee Jones
• [PATCH 19/20] iio: gyro-core: st: Clean up error handling in probe()   Lee Jones
• [PATCH 20/20] iio: magn-core: st: Clean up error handling in probe()   Lee Jones
• [PATCH] ARM: ux500: disable outer cache debug   Lee Jones
• [PATCH 14/38] iio: accel: st: Append _accel to accelerator sensor device names   Lee Jones
• [PATCH 4/4] ARM: STi: Add I2C config to B2000 and B2020 boards   Lee Jones
• [PATCH 3/4] ARM: STi: Supply I2C configuration to STiH415 SoC   Lee Jones
• [PATCH 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Lee Jones
• [PATCH v2 00/41] Enable common clock with Device Tree on ux500 platforms   Lee Jones
• [PATCH 01/41] mfd: dbx500-prcmu: Correctly reorder PRCMU clock identifiers   Lee Jones
• [PATCH 02/41] mfd: dbx500-prcmu: Move PRCMU numerical clock identifiers into DT include file   Lee Jones
• [PATCH 03/41] mfd: dbx500: Remove any mention of the BML8580CLK   Lee Jones
• [PATCH 04/41] ARM: ux500: Add PRCMU clock node to DBx500 Device Tree   Lee Jones
• [PATCH 05/41] ARM: ux500: Supply the DMA clock lookup to the DBX500 DT   Lee Jones
• [PATCH 06/41] ARM: ux500: Add PRCC Peripheral clock node to DBx500 Device Tree   Lee Jones
• [PATCH 07/41] ARM: ux500: Supply the GPIO clocks lookup to the DBX500 DT   Lee Jones
• [PATCH 08/41] ARM: ux500: Supply the USB clock lookup to the DBX500 DT   Lee Jones
• [PATCH 09/41] ARM: ux500: Supply the Ethernet clock lookup to Snowball's DT   Lee Jones
• [PATCH 10/41] ARM: ux500: Add PRCC Kernel clock node to DBx500 Device Tree   Lee Jones
• [PATCH 11/41] ARM: ux500: Supply the I2C clocks lookup to the DBX500 DT   Lee Jones
• [PATCH 12/41] ARM: ux500: Supply the UART clocks lookup to the DBX500 DT   Lee Jones
• [PATCH 13/41] ARM: ux500: Supply the SDI (MMC) clocks lookup to the DBX500 DT   Lee Jones
• [PATCH 14/41] ARM: ux500: Supply the MSP (Audio) clocks lookup to the DBX500 DT   Lee Jones
• [PATCH 15/41] ARM: ux500: Add RTC (fixed-frequency) clock node to DBx500 Device Tree   Lee Jones
• [PATCH 16/41] ARM: ux500: Supply the RTC clock lookup to the DBX500 DT   Lee Jones
• [PATCH 17/41] ARM: ux500: Add TWD (fixed-factor) clock node to DBx500 Device Tree   Lee Jones
• [PATCH 18/41] ARM: ux500: Supply the TWD Timer clock lookup to the DBX500 DT   Lee Jones
• [PATCH 19/41] ARM: ux500: Add a DT node for the Nomadik System Timer (MTU0)   Lee Jones
• [PATCH 20/41] ARM: ux500: Don't attempt to enable the Nomadik System Timer twice   Lee Jones
• [PATCH 21/41] clk: ux500: Remove BML8580 clock   Lee Jones
• [PATCH 22/41] clk: ux500: Copy u8500_clk_init() ready for DT enablement   Lee Jones
• [PATCH 23/41] clk: ux500: Provide u8500_clk with skeleton Device Tree support   Lee Jones
• [PATCH 24/41] clk: ux500: Add a 2-cell Device Tree parser for obtaining PRCC clocks   Lee Jones
• [PATCH 25/41] clk: ux500: Add Device Tree support for the PRCMU clock   Lee Jones
• [PATCH 26/41] clk: ux500: Add Device Tree support for the PRCC Peripheral clock   Lee Jones
• [PATCH 27/41] clk: ux500: Add Device Tree support for the PRCC Kernel clock   Lee Jones
• [PATCH 28/41] clk: ux500: Add Device Tree support for the RTC clock   Lee Jones
• [PATCH 29/41] clk: ux500: Add Device Tree support for the TWD clock   Lee Jones
• [PATCH 30/41] usb: musb: ux500: Don't supply a con_id when requesting the clock   Lee Jones
• [PATCH 31/41] ARM: ux500: Call appropriate clock initialisation based on DT or !DT booting   Lee Jones
• [PATCH 32/41] ARM: ux500: Remove AUXDATA relating to GPIO clock-name bindings   Lee Jones
• [PATCH 33/41] ARM: ux500: Remove AUXDATA relating to UART clock-name bindings   Lee Jones
• [PATCH 34/41] ARM: ux500: Remove AUXDATA relating to I2C clock-name bindings   Lee Jones
• [PATCH 35/41] ARM: ux500: Relocate AUXDATA relating to MSP (Audio)   Lee Jones
• [PATCH 36/41] ARM: ux500: Remove AUXDATA relating to USB clock-name bindings   Lee Jones
• [PATCH 37/41] ARM: ux500: Remove AUXDATA relating to Ethernet clock-name bindings   Lee Jones
• [PATCH 38/41] ARM: ux500: Remove AUXDATA relating to DMA clock-name bindings   Lee Jones
• [PATCH 39/41] ARM: ux500: Reclassify PRCMU AUXDATA entry   Lee Jones
• [PATCH 40/41] ARM: ux500: Remove SSP AUXDATA pertaining to DMA bindings   Lee Jones
• [PATCH 41/41] ARM: ux500: Fix trivial whitespace/tabbing issue   Lee Jones
• [PATCH 06/22] ARM: dts: bcm281xx: Remove '0x's from BCM11351 DTS file   Lee Jones
• [GIT PULL] Removeal of 0x's from DT address spaces   Lee Jones
• [PATCH 0/2] Fixes for STi SOCs   Lee Jones
• [PATCH 22/41] clk: ux500: Copy u8500_clk_init() ready for DT enablement   Lee Jones
• [PATCH 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Lee Jones
• [PATCH] ARM: ux500: delete devices-common remnants   Lee Jones
• [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd   Balaji T K
• [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd   Balaji T K
• [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support   Balaji T K
• [PATCH 2/2] mmc: omap_hsmmc: Enable SDIO interrupt   Balaji T K
• [PATCH 1/2] ARM: dts: am335x-bone-common: correct mux mode for cmd line   Balaji T K
• [PATCH 2/2] ARM: dts: am335x-evm, am335x-evmsdk: switch mmc1 to 4-bit mode   Balaji T K
• [PATCH] ARM: dts: am335x-boneblack: move fixed regulator to board level   Balaji T K
• [PATCH 0/2] Fixes for STi SOCs   Srinivas KANDAGATLA
• [PATCH 1/2] ARM: STi: OF: Fix a typo in pincfg header   Srinivas KANDAGATLA
• [PATCH 2/2] ARM: multi_v7_defconfig: Fix STi support   Srinivas KANDAGATLA
• [PATCH] ARM: STi: remove unused Kconfig parameters   Srinivas KANDAGATLA
• [PATCH 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Srinivas KANDAGATLA
• [PATCH 2/4] ARM: STi: Supply I2C configuration to STiH416 SoC   Srinivas KANDAGATLA
• [PATCH] ARM: STi: Add cpu hotplug support   Srinivas KANDAGATLA
• [PATCH] ARM: STi: Add cpu hotplug support   Srinivas KANDAGATLA
• [PATCH v2 2/4] clocksource/arm_global_timer: Set FEAT_PERCPU flag   Srinivas KANDAGATLA
• [PATCHv6 1/2] ARM: sunxi: Initial support for Allwinner's Security ID fuses   Greg KH
• [PATCHv7 0/2] ARM: sunxi: Driver for Allwinner sunxi Security ID   Greg KH
• [PATCH v11 0/8] PHY framework   Greg KH
• [PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Greg KH
• [PATCH v11 0/8] PHY framework   Greg KH
• [PATCH V5 1/9] USB: OHCI: make ohci-exynos a separate driver   Greg KH
• [PATCH v11 2/8] usb: phy: omap-usb2: use the new generic PHY framework   Greg KH
• [PATCH] serial: prepare for 9bit data   Greg KH
• [PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver   Greg KH
• [PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver   Greg KH
• [PATCH v12 0/7] PHY framework   Greg KH
• [PATCH] IXP4xx: Add Gateworks Cambria support.   Imre Kaloz
• [PATCH] IXP4xx: Add Gateworks Cambria support.   Imre Kaloz
• [PATCH 1/2] dma: ste_dma40: Remove duplicate const   Sachin Kamat
• [PATCH 2/2] dma: ste_dma40: Fix potential null pointer dereference   Sachin Kamat
• [PATCH 01/10] clk: bcm2835: Remove duplicate inclusion of clk-provider.h   Sachin Kamat
• [PATCH 02/10] clk: SPEAr: Staticize clk_frac_ops   Sachin Kamat
• [PATCH 03/10] clk: tegra: Staticize local variables in clk-pll.c   Sachin Kamat
• [PATCH 04/10] clk: tegra: Staticize tegra_clk_periph_nodiv_ops   Sachin Kamat
• [PATCH 05/10] clk: socfpga: Use NULL instead of 0   Sachin Kamat
• [PATCH 06/10] clk: versatile: Staticize clk_sp810_timerclken_of_get   Sachin Kamat
• [PATCH 07/10] clk: mvebu: Staticize of_cpu_clk_setup   Sachin Kamat
• [PATCH 08/10] clk: vt8500: Staticize vtwm_pll_ops   Sachin Kamat
• [PATCH 09/10] clk: ux500: Remove extra semicolon   Sachin Kamat
• [PATCH 10/10] clk: max77686: Remove redundant break   Sachin Kamat
• [PATCH v5 0/4] media: s5p-tv: clean-up and fixes   Sachin Kamat
• [PATCH] DT: if dt is available don't use s3c_arch_init   Sachin Kamat
• [PATCH 01/10] clk: bcm2835: Remove duplicate inclusion of clk-provider.h   Sachin Kamat
• [PATCH] ARM: signal: sigreturn_codes fix build breakage for old arch   Victor Kamensky
• [PATCH] ARM: signal: sigreturn_codes fix build breakage for old arch   Victor Kamensky
• General placement of platform drivers and header files   Feng Kan
• General placement of platform drivers and header files   Feng Kan
• [PATCH 1/1] arm64: X-Gene AHBC platform bus driver   Feng Kan
• [RFC Patch v2 1/3] clk: add support for temporary parent clock migration   Saravana Kannan
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Saravana Kannan
• [GIT PULL] ARM/ARM64 architected timer updates for v3.12, take 2   Sudeep KarkadaNagesha
• [PATCH v4 12/19] cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes   Sudeep KarkadaNagesha
• [PATCH v4 12/19] cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes   Sudeep KarkadaNagesha
• [PATCH v4 12/19] cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes   Sudeep KarkadaNagesha
• [PATCH v2 00/03] ARM: shmobile: r8a7790 APMU SMP support   Sudeep KarkadaNagesha
• [PATCH 0/4] cpufreq: fixes for v3.12   Sudeep KarkadaNagesha
• [PATCH 1/4] cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device   Sudeep KarkadaNagesha
• [PATCH 2/4] cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device   Sudeep KarkadaNagesha
• [PATCH 3/4] ARM: i.MX: change dev_id to cpu0 while registering cpu clock   Sudeep KarkadaNagesha
• [PATCH 4/4] ARM: shmobile: change dev_id to cpu0 while registering cpu clock   Sudeep KarkadaNagesha
• [PATCH 1/4] cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device   Sudeep KarkadaNagesha
• [PATCH 0/4] cpufreq: fixes for v3.12   Sudeep KarkadaNagesha
• [PATCH v6 RESEND 0/5] ARM/ARM64 architected timer updates   Sudeep KarkadaNagesha
• [PATCH v6 RESEND 1/5] ARM/ARM64: arch_timer: add macros for bits in control register   Sudeep KarkadaNagesha
• [PATCH v6 RESEND 2/5] ARM: arch_timer: add support to configure and enable event stream   Sudeep KarkadaNagesha
• [PATCH v6 RESEND 3/5] ARM64: arch_timer: add support to configure and enable event stream   Sudeep KarkadaNagesha
• [PATCH v6 RESEND 4/5] drivers: clocksource: add support for ARM architected timer event stream   Sudeep KarkadaNagesha
• [PATCH v6 RESEND 5/5] drivers: clocksource: add CPU PM notifier for ARM architected timer   Sudeep KarkadaNagesha
• [PATCH RFC 0/3] ARM: cacheinfo support   Sudeep KarkadaNagesha
• [PATCH RFC 1/3] ARM: kernel: add support for cpu cache information   Sudeep KarkadaNagesha
• [PATCH RFC 2/3] ARM: kernel: add outer cache support for cacheinfo implementation   Sudeep KarkadaNagesha
• [PATCH RFC 3/3] ARM: kernel: support cpu cache information interface to userspace via sysfs   Sudeep KarkadaNagesha
• [PATCH v6 RESEND 0/5] ARM/ARM64 architected timer updates   Sudeep KarkadaNagesha
• [GIT PULL] ARM/ARM64 architected timer updates for v3.13   Sudeep KarkadaNagesha
• [PATCH v6 RESEND 0/5] ARM/ARM64 architected timer updates   Sudeep KarkadaNagesha
• [PATCH v4 02/10] ARM: dts: list the CPU nodes for Exynos5250   Chander Kashyap
• [RFC Patch v2 0/3] add temporary parent migration support   Chander Kashyap
• [RFC Patch v2 1/3] clk: add support for temporary parent clock migration   Chander Kashyap
• [RFC Patch v2 2/3] clk: update users of "clk_register_mux" and "DEFINE_CLK_MUX"   Chander Kashyap
• [RFC Patch v2 3/3] clk: samsung: Exynos5250: Add alternate parent name for mout_cpu   Chander Kashyap
• [RFC Patch v2 0/3] add temporary parent migration support   Chander Kashyap
• [RFC Patch v2 1/3] clk: add support for temporary parent clock migration   Chander Kashyap
• [PATCH 0/2] Enable all cpus in Exynos5420   Chander Kashyap
• [PATCH 1/2] clocksource: mct: extend mct to support 8 local interrupts for Exynos5420   Chander Kashyap
• [PATCH 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Chander Kashyap
• [PATCH 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Chander Kashyap
• [PATCH 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Chander Kashyap
• [PATCH v2 0/2] Enable all cpus in Exynos5420   Chander Kashyap
• [PATCH v2 1/2] clocksource: mct: extend mct to support 8 local interrupts for Exynos5420   Chander Kashyap
• [PATCH v2 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Chander Kashyap
• [PATCH v2 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Chander Kashyap
• [PATCH v3 0/2] Enable all cpus in Exynos5420   Chander Kashyap
• [PATCH v3 1/2] clocksource: mct: extend mct to support 8 local interrupts for Exynos5420   Chander Kashyap
• [PATCH v3 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Chander Kashyap
• [RFC Patch v2 0/3] add temporary parent migration support   Chander Kashyap
• [RFC Patch v2 0/3] add temporary parent migration support   Chander Kashyap
• [PATCH] irqchip: exynos-combiner: remove hard-coded irq_base value   Chander Kashyap
• [PATCH] irqchip: exynos-combiner: remove hard-coded irq_base value   Chander Kashyap
• [PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value   Chander Kashyap
• [PATCH] clk: samsung: fix cpll clock register offsets for exynos5420 SoC   Chander Kashyap
• [PATCH] clk: samsung: fix cpll clock register offsets for exynos5420 SoC   Chander Kashyap
• [PATCH v2] clk: exynos5420: fix cpll clock register offsets   Chander Kashyap
• [PATCH] ARM: vexpress: ignore MIDR[0] for uart detection   Mian Yousaf Kaukab
• [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes   Keerthy
• [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes   Keerthy
• KGDB on ARMv7   Vijay Kilari
• [RFC PATCH 2/2] Aarch64: KGDB: Add Step debugging support   Vijay Kilari
• [RFC PATCH 1/2] Aarch64: KGDB: Add Basic KGDB support   Vijay Kilari
• [RFC PATCH 1/2] Aarch64: KGDB: Add Basic KGDB support   Vijay Kilari
• [PATCH v2 00/12] clk/exynos convert clock IDs to macros   Kukjin Kim
• [GIT PULL 0/2] Samsung S3C64xx for v3.13   Kukjin Kim
• [GIT PULL 1/2] Samsung Common CLK for S3C64XX   Kukjin Kim
• [GIT PULL 2/2] Samsung DT for S3C64XX   Kukjin Kim
• [PATCH] ARM: EXYNOS: fix PL330 MDMA1 address in DT for Universal C210 board   Kukjin Kim
• [PATCH] DT: if dt is available don't use s3c_arch_init   Kukjin Kim
• [PATCH] ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4,5]_DT config options   Kukjin Kim
• [PATCH] pinctrl: Correct number of pins for s5pv210   Kukjin Kim
• [PATCH] clk: samsung: fix cpll clock register offsets for exynos5420 SoC   Kukjin Kim
• [PATCH v2] irqchip: exynos-combiner: remove hard-coded irq_base value   Kukjin Kim
• [PATCH v2] ARM: SAMSUNG: S5P: If detected device tree skip irq init   Kukjin Kim
• [RFC] clk: samsung: Remove old clock drivers for s5pc100 and s5pv210   Kukjin Kim
• [RFC] clk: samsung: Remove old clock drivers for s5pc100 and s5pv210   Kukjin Kim
• [PATCH 1/5] ARM: Kconfig: Move if ARCH_S3C64XX statement to mach-s3c64xx/Kconfig   Kukjin Kim
• [PATCH v2 00/12] clk/exynos convert clock IDs to macros   Kukjin Kim
• [PATCH 01/51] DMA-API: provide a helper to set both DMA and coherent DMA masks   Russell King
• [PATCH 02/51] DMA-API: net: brocade/bna/bnad.c: fix 32-bit DMA mask handling   Russell King
• [PATCH 03/51] DMA-API: net: intel/e1000e: fix 32-bit DMA mask handling   Russell King
• [PATCH 04/51] DMA-API: net: intel/igb: fix 32-bit DMA mask handling   Russell King
• [PATCH 05/51] DMA-API: net: intel/igbvf: fix 32-bit DMA mask handling   Russell King
• [PATCH 06/51] DMA-API: net: intel/ixgb: fix 32-bit DMA mask handling   Russell King
• [PATCH 07/51] DMA-API: net: intel/ixgbe: fix 32-bit DMA mask handling   Russell King
• [PATCH 08/51] DMA-API: net: intel/ixgbevf: fix 32-bit DMA mask handling   Russell King
• [PATCH 09/51] DMA-API: net: broadcom/b44: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 10/51] DMA-API: net: broadcom/bnx2x: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 11/51] DMA-API: net: emulex/benet: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 12/51] DMA-API: net: intel/e1000: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 13/51] DMA-API: net: sfc/efx.c: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 14/51] DMA-API: net: b43: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 15/51] DMA-API: net: b43legacy: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 16/51] DMA-API: ppc: vio.c: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 17/51] DMA-API: block: nvme-core: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 18/51] DMA-API: staging: et131x: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 19/51] DMA-API: media: dt3155v4l: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 20/51] DMA-API: usb: bcma: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 21/51] DMA-API: usb: ssb-hcd: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Russell King
• [PATCH 22/51] DMA-API: amba: get rid of separate dma_mask   Russell King
• [PATCH 23/51] DMA-API: dma: pl08x: add dma_set_mask_and_coherent() call   Russell King
• [PATCH 24/51] DMA-API: dma: pl330: add dma_set_mask_and_coherent() call   Russell King
• [PATCH 25/51] DMA-API: video: clcd: add dma_set_mask_and_coherent() call   Russell King
• [PATCH 26/51] DMA-API: usb: ohci-sa1111: add a note about DMA masks   Russell King
• [PATCH 27/51] DMA-API: provide a helper to setup DMA masks   Russell King
• [PATCH 28/51] DMA-API: sound: fix dma mask handling in a lot of drivers   Russell King
• [PATCH 29/51] DMA-API: ata: pata_octeon_cf: convert to use dma_coerce_mask_and_coherent()   Russell King
• [PATCH 30/51] DMA-API: dma: dw_dmac.c: convert to use dma_coerce_mask_and_coherent()   Russell King
• [PATCH 31/51] DMA-API: media: omap3isp: use dma_coerce_mask_and_coherent()   Russell King
• [PATCH 32/51] DMA-API: mmc: sdhci-acpi: use dma_coerce_mask_and_coherent()   Russell King
• [PATCH 33/51] DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()   Russell King
• [PATCH 34/51] DMA-API: net: octeon: use dma_coerce_mask_and_coherent()   Russell King
• [PATCH 35/51] DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()   Russell King
• [PATCH 36/51] DMA-API: usb: use dma_set_coherent_mask()   Russell King
• [PATCH 37/51] DMA-API: usb: use new dma_coerce_mask_and_coherent()   Russell King
• [PATCH 38/51] DMA-API: staging: use dma_set_coherent_mask()   Russell King
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()   Russell King
• [PATCH 40/51] DMA-API: crypto: fix ixp4xx crypto platform device support   Russell King
• [PATCH 41/51] DMA-API: crypto: remove last references to 'static struct device *dev'   Russell King
• [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks   Russell King
• [PATCH 43/51] DMA-API: dma: edma.c: no need to explicitly initialize DMA masks   Russell King
• [PATCH 44/51] DMA-API: dcdbas: update DMA mask handing   Russell King
• [PATCH 45/51] DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks   Russell King
• [PATCH 46/51] ARM: DMA-API: better handing of DMA masks for coherent allocations   Russell King
• [PATCH 47/51] ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()   Russell King
• [PATCH 48/51] ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function   Russell King
• [PATCH 49/51] ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations   Russell King
• [PATCH 50/51] ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations   Russell King
• [PATCH 51/51] ARM: 7805/1: mm: change max*pfn to include the physical offset of memory   Russell King
• [PATCH 12/51] DMA-API: net: intel/e1000: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Jeff Kirsher
• [PATCH 03/51] DMA-API: net: intel/e1000e: fix 32-bit DMA mask handling   Jeff Kirsher
• [PATCH 04/51] DMA-API: net: intel/igb: fix 32-bit DMA mask handling   Jeff Kirsher
• [PATCH 05/51] DMA-API: net: intel/igbvf: fix 32-bit DMA mask handling   Jeff Kirsher
• [PATCH 06/51] DMA-API: net: intel/ixgb: fix 32-bit DMA mask handling   Jeff Kirsher
• [PATCH 07/51] DMA-API: net: intel/ixgbe: fix 32-bit DMA mask handling   Jeff Kirsher
• [PATCH 08/51] DMA-API: net: intel/ixgbevf: fix 32-bit DMA mask handling   Jeff Kirsher
• [PATCH 1/4] crypto: create generic version of ablk_helper   Jussi Kivilinna
• [PATCH 4/4] ARM: add support for bit sliced AES using NEON instructions   Jussi Kivilinna
• [PATCH] [PATCH] clocksource: tcb: fix min_delta calculation   Marc Kleine-Budde
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Marc Kleine-Budde
• [PATCH 2/3] dma: mxs-dma: Track number of irqs for callback   Marc Kleine-Budde
• imprecise external abort using the flexcan driver on i.MX6Q   Marc Kleine-Budde
• imprecise external abort using the flexcan driver on i.MX6Q   Marc Kleine-Budde
• imprecise external abort using the flexcan driver on i.MX6Q   Marc Kleine-Budde
• imprecise external abort using the flexcan driver on i.MX6Q   Marc Kleine-Budde
• imprecise external abort using the flexcan driver on i.MX6Q   Marc Kleine-Budde
• imprecise external abort using the flexcan driver on i.MX6Q   Marc Kleine-Budde
• imprecise external abort using the flexcan driver on i.MX6Q   Marc Kleine-Budde
• [PATCH v2 1/3] dma: mxs-dma: Cleanup interrupt handler   Marc Kleine-Budde
• pinctrl-mxs fails to parse function definitions from different .dts files   Uwe Kleine-König
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   Uwe Kleine-König
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Uwe Kleine-König
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Uwe Kleine-König
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Uwe Kleine-König
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Uwe Kleine-König
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Uwe Kleine-König
• [PATCH] clockevents: Sanitize ticks to nsec conversion   Uwe Kleine-König
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Uwe Kleine-König
• [PATCH] clk: fix function name in devm_clk_put kernel-doc comment   Uwe Kleine-König
• [PATCH] serial: clps711x: drop needless devm_clk_put   Uwe Kleine-König
• [PATCH] remoteproc/davinci: drop needless devm_clk_put   Uwe Kleine-König
• [PATCH] video: mmp: drop needless devm cleanup   Uwe Kleine-König
• [PATCH] ARM: DEBUG_LL on efm32 SoCs   Uwe Kleine-König
• [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP   Uwe Kleine-König
• [PATCH] ASoC: kirkwood: simplify clock handling   Uwe Kleine-König
• [PATCH] [media] marvell-ccic: simplify and fix clk handling (a bit)   Uwe Kleine-König
• [PATCH v2] [media] marvell-ccic: simplify and fix clk handling (a bit)   Uwe Kleine-König
• [PATCH] [RFC] devm: drop devm_clk_put   Uwe Kleine-König
• [PATCH] ASoC: kirkwood: simplify clock handling   Uwe Kleine-König
• [PATCH v2] clockevents: Sanitize ticks to nsec conversion   Uwe Kleine-König
• Timekeeping on at91rm9200 [Was: [PATCH v2] clockevents: Sanitize ticks to nsec conversion]   Uwe Kleine-König
• [PATCH v2] clockevents: Sanitize ticks to nsec conversion   Uwe Kleine-König
• [PATCH] ARM: davinci: convert to clockevents_config_and_register   Uwe Kleine-König
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   Uwe Kleine-König
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   Uwe Kleine-König
• [PATCH v2] [media] marvell-ccic: simplify and fix clk handling (a bit)   Uwe Kleine-König
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   Uwe Kleine-König
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   Uwe Kleine-König
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH 0/3] v7-M support using MULTIPLATFORM   Uwe Kleine-König
• [PATCH 1/3] ARM: drop !ARCH_MULTIPLATFORM dependency of XIP_KERNEL   Uwe Kleine-König
• [PATCH 2/3] ARM: allow MULTIPLATFORM on no-MMU machines   Uwe Kleine-König
• [PATCH 3/3] [RFC] ARM: prepare ARMv7-M for MULTIPLATFORM use   Uwe Kleine-König
• [PATCH] ARM: mach-imx: cpu: Include <linux/err.h>   Uwe Kleine-König
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Uwe Kleine-König
• [PATCH 3/3] [RFC] ARM: prepare ARMv7-M for MULTIPLATFORM use   Uwe Kleine-König
• [patch 1/1] imx51.dtsi: fix PATA device clock   Steev Klimaszewski
• [PATCH] ARM: tegra_defconfig: enable CONFIG_ARM_APPENDED_DTB   Steev Klimaszewski
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCHv2] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCHv3] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Koen Kooi
• [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13   Koen Kooi
• [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13   Koen Kooi
• [PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13   Koen Kooi
• [PATCH 0/2] ARM: dts: Beaglebone MMC fixes   Koen Kooi
• [PATCH 1/2] arm: bone: dts: add CD for mmc1   Koen Kooi
• [PATCH 2/2] am335x-boneblack: add eMMC DT entry   Koen Kooi
• [PATCH 2/2] am335x-boneblack: add eMMC DT entry   Koen Kooi
• [PATCHv2 0/2] ARM: dts: Beaglebone MMC fixes   Koen Kooi
• [PATCHv2 1/2] arm: bone: dts: add CD for mmc1   Koen Kooi
• [PATCHv2 2/2] am335x-boneblack: add eMMC DT entry   Koen Kooi
• [PATCHv3 0/2] ARM: dts: Beaglebone MMC fixes   Koen Kooi
• [PATCH 1/4] arm: bone: dts: add CD for mmc1   Koen Kooi
• [PATCH 2/4] am335x-boneblack: add eMMC DT entry   Koen Kooi
• [PATCH 3/4] ARM: am335x-bone-common: switch mmc1 to 4-bit mode   Koen Kooi
• [PATCH 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers   Koen Kooi
• [PATCH v4 0/2] ARM: dts: Beaglebone MMC fixes   Koen Kooi
• [PATCH v4 1/4] ARM: dts: am335x-bone: add CD for mmc1   Koen Kooi
• [PATCH v4 2/4] ARM: dts: am335x-boneblack: add eMMC DT entry   Koen Kooi
• [PATCH v4 3/4] ARM: dts: am335x-bone-common: switch mmc1 to 4-bit mode   Koen Kooi
• [PATCH v4 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers   Koen Kooi
• [PATCH v4 0/2] ARM: dts: Beaglebone MMC fixes   Koen Kooi
• Inte IOP Xscale updates   Aaro Koskinen
• [PATCH 1/8] ARM: plat-iop: move the GPIO driver to drivers/gpio   Aaro Koskinen
• [PATCH 0/8] IOP GPIO refactoring   Aaro Koskinen
• [PATCH 0/8] IOP GPIO refactoring   Aaro Koskinen
• [PATCH 136/228] cpufreq: loongson2: use cpufreq_generic_init() routine   Aaro Koskinen
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Aaro Koskinen
• 3.12-rc1: no longer compiles for Nokia n900 (omap based), display no longer works   Aaro Koskinen
• [PATCH] ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT   Aaro Koskinen
• [PATCH 0/8] IOP GPIO refactoring take 2   Aaro Koskinen
• [PATCH] ARM: DTS: omap3-devkit8000.dts: fix a typo   Aaro Koskinen
• [PATCH 0/3] ARM: OMAP: convert N950/N9 to DT   Aaro Koskinen
• [PATCH 1/3] ARM: OMAP2: HACK: hardcode hsmmc2 input clock source for N950/N9   Aaro Koskinen
• [PATCH 2/3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones   Aaro Koskinen
• [PATCH 3/3] ARM: OMAP2: delete board-rm680   Aaro Koskinen
• [PATCH 1/3] ARM: OMAP2: HACK: hardcode hsmmc2 input clock source for N950/N9   Aaro Koskinen
• [PATCH v2 0/3] ARM: OMAP: convert N950/N9 to DT   Aaro Koskinen
• [PATCH v2 1/3] ARM: OMAP2: pdata-quirks: set internal clock source for MMC2 on N950/N9   Aaro Koskinen
• [PATCH v2 2/3] ARM: dts: add minimal DT support for Nokia N950 & N9 phones   Aaro Koskinen
• [PATCH v2 3/3] ARM: OMAP2: delete board-rm680   Aaro Koskinen
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [PATCH 00/18] ARM: s3c64xx: Let amba-pl08x driver handle DMA   Vinod Koul
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Vinod Koul
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [PATCH] dma: dmagengine: fix function names in comments   Vinod Koul
• [PATCH 1/2] dma: ste_dma40: Remove duplicate const   Vinod Koul
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [PATCH v4 0/6] dma: edma: Support scatter-lists of any length   Vinod Koul
• [PATCH v4 2/6] dma: edma: Write out and handle MAX_NR_SG at a given time   Vinod Koul
• [PATCH v4 3/3] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Vinod Koul
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Vinod Koul
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Vinod Koul
• [PATCH v5 4/5] dma: mmp_pdma: add support for residue reporting   Vinod Koul
• [PATCH 3/3] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [PATCH 1/3] dmaengine: pl330: Set residue in tx_status callback.   Vinod Koul
• [[PATCH] 0/3] imx-dma: fixes   Vinod Koul
• [PATCH] DMA: ste_dma40: use a power of 2 check   Vinod Koul
• [PATCH 3/3] dma: Add Freescale eDMA engine driver support   Vinod Koul
• [alsa-devel] [PATCH 23/51] DMA-API: dma: pl08x: add dma_set_mask_and_coherent() call   Vinod Koul
• [alsa-devel] [PATCH 43/51] DMA-API: dma: edma.c: no need to explicitly initialize DMA masks   Vinod Koul
• [alsa-devel] [PATCH 24/51] DMA-API: dma: pl330: add dma_set_mask_and_coherent() call   Vinod Koul
• [PATCH v2 3/5] dma: Allow TI_EDMA selectable for ARCH_KEYSTONE   Vinod Koul
• [PATCH v5 0/4] media: s5p-tv: clean-up and fixes   Mateusz Krawczuk
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Mateusz Krawczuk
• [PATCH v5 2/4] media: s5p-tv: Restore vpll clock rate   Mateusz Krawczuk
• [PATCH v5 3/4] media: s5p-tv: Fix sdo driver to work with CCF   Mateusz Krawczuk
• [PATCH v5 4/4] media: s5p-tv: Fix mixer driver to work with CCF   Mateusz Krawczuk
• [PATCH v4 0/3] ARM: S5PV210: move to common clk framework   Mateusz Krawczuk
• [PATCH v4 1/3] clk: samsung: Add clock driver for s5pc110/s5pv210   Mateusz Krawczuk
• [PATCH v4 2/3] Cpufreq: s5pv210 cpufreq fixes for CCF   Mateusz Krawczuk
• [PATCH v4 3/3] ARM: s5pv210: Migrate clock handling to Common Clock Framework   Mateusz Krawczuk
• [PATCH] spi: s3c64xx: Add missing compatibles   Mateusz Krawczuk
• [PATCH] DT: S5P: If detected device tree skip irq init   Mateusz Krawczuk
• [PATCH] DT: if dt is available don't use s3c_arch_init   Mateusz Krawczuk
• [PATCH v5 0/3] ARM: S5PV210: move to common clk framework   Mateusz Krawczuk
• [PATCH v5 1/3] clk: samsung: Add clock driver for s5pc110/s5pv210   Mateusz Krawczuk
• [PATCH v5 2/3] Cpufreq: s5pv210 cpufreq fixes for CCF   Mateusz Krawczuk
• [PATCH v5 3/3] ARM: s5pv210: Migrate clock handling to Common Clock Framework   Mateusz Krawczuk
• [PATCH] pinctrl: Correct number of pins for s5pv210   Mateusz Krawczuk
• [PATCH v2] ARM: SAMSUNG: S5P: If detected device tree skip irq init   Mateusz Krawczuk
• [PATCH 1/3] clk: samsung: pll: Add support for PLL6545a and PLL6522x   Mateusz Krawczuk
• [PATCH 2/3] clk: samsung: Add clock driver for s5pc100   Mateusz Krawczuk
• [PATCH 3/3] ARM: s5pc100: Migrate clock handling to Common Clock Framework   Mateusz Krawczuk
• [PATCH 0/3] ARM: S5PC100: move to common clk framework   Mateusz Krawczuk
• [RFC] clk: samsung: Remove old clock drivers for s5pc100 and s5pv210   Mateusz Krawczuk
• [RFC 0/3]ARM: SAMSUNG: MACH S5PV210: Add support for Devicetree   Mateusz Krawczuk
• [PATCH 0/3] Samsung: DT: Add Device tree for S5PC110/S5PV210 Boards   Mateusz Krawczuk
• [PATCH 1/3] ARM: s5pv210: Add board file for boot using Device Tree   Mateusz Krawczuk
• [PATCH 2/3] ARM: Samsung: DT: Add Device tree for s5pv210   Mateusz Krawczuk
• [PATCH 3/3] ARM: Samsung: DT: Add Device tree for S5PC110/S5PV210 Boards   Mateusz Krawczuk
• [PATCH v4 1/4] ARM: dts: am335x-bone: add CD for mmc1   Jason Kridner
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Tero Kristo
• [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT   Tero Kristo
• [PATCHv7 01/36] CLK: TI: Add DPLL clock support   Tero Kristo
• [PATCHv7 02/36] CLK: TI: add DT alias clock registration mechanism   Tero Kristo
• [PATCHv7 03/36] CLK: TI: add autoidle support   Tero Kristo
• [PATCHv7 04/36] CLK: ti: add support for ti divider-clock   Tero Kristo
• [PATCHv7 05/36] clk: ti: add support for TI fixed factor clock   Tero Kristo
• [PATCHv7 06/36] CLK: TI: add support for OMAP gate clock   Tero Kristo
• [PATCHv7 07/36] CLK: TI: add support for clockdomain binding   Tero Kristo
• [PATCHv7 08/36] ARM: dts: omap4 clock data   Tero Kristo
• [PATCHv7 09/36] clk: ti: add mux-gate clock support   Tero Kristo
• [PATCHv7 10/36] clk: ti: add support for basic mux clock   Tero Kristo
• [PATCHv7 11/36] CLK: TI: add omap4 clock init file   Tero Kristo
• [PATCHv7 12/36] ARM: OMAP4: remove old clock data and link in new clock init code   Tero Kristo
• [PATCHv7 13/36] ARM: dts: omap5 clock data   Tero Kristo
• [PATCHv7 14/36] CLK: TI: add omap5 clock init file   Tero Kristo
• [PATCHv7 15/36] CLK: TI: omap5: Initialize USB_DPLL at boot   Tero Kristo
• [PATCHv7 16/36] ARM: dts: dra7 clock data   Tero Kristo
• [PATCHv7 17/36] ARM: dts: clk: Add apll related clocks   Tero Kristo
• [PATCHv7 18/36] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock   Tero Kristo
• [PATCHv7 19/36] ARM: dts: DRA7: Add PCIe related clock nodes   Tero Kristo
• [PATCHv7 20/36] CLK: TI: DRA7: Add APLL support   Tero Kristo
• [PATCHv7 21/36] CLK: TI: add dra7 clock init file   Tero Kristo
• [PATCHv7 22/36] ARM: OMAP: DRA7: Enable clock init   Tero Kristo
• [PATCHv7 23/36] ARM: dts: DRA7: link in clock DT data   Tero Kristo
• [PATCHv7 24/36] ARM: dts: am33xx clock data   Tero Kristo
• [PATCHv7 25/36] CLK: TI: add am33xx clock init file   Tero Kristo
• [PATCHv7 26/36] ARM: AM33xx: remove old clock data and link in new clock init code   Tero Kristo
• [PATCHv7 27/36] CLK: TI: add interface clock support for OMAP3   Tero Kristo
• [PATCHv7 28/36] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm   Tero Kristo
• [PATCHv7 29/36] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name   Tero Kristo
• [PATCHv7 30/36] ARM: dts: omap3 clock data   Tero Kristo
• [PATCHv7 31/36] CLK: TI: add omap3 clock init file   Tero Kristo
• [PATCHv7 32/36] ARM: dts: AM35xx: use DT clock data   Tero Kristo
• [PATCHv7 33/36] ARM: OMAP3: use DT clock init if DT data is available   Tero Kristo
• [PATCHv7 34/36] ARM: dts: am43xx clock data   Tero Kristo
• [PATCHv7 35/36] ARM: dts: AM43xx: link in clock DT data   Tero Kristo
• [PATCHv7 36/36] CLK: TI: add am43xx clock init file   Tero Kristo
• [PATCH v2 5/9] drivers/misc: convert existing I2C clients driver to use I2C core runtime PM   Greg Kroah-Hartman
• [PATCH 5/7] staging: media/lirc: switch to use gpiolib   Greg Kroah-Hartman
• dev->of_node overwrite can cause device loading with different driver   Greg Kroah-Hartman
• dev->of_node overwrite can cause device loading with different driver   Greg Kroah-Hartman
• [PATCH 2/7] misc: ixp4-beeper: switch to use gpiolib   Greg Kroah-Hartman
• [PATCH 3/7] misc: ixp4-beeper: use gpiolib strictly   Greg Kroah-Hartman
• [PATCH] ARM: DT: Add missing UARTs for bcm11351 (bcm281xx)   Tim Kryger
• [PATCH 0/5] CPUFreq: Last set of updates for 3.13   Amit Kucheria
• Build error in torvalds kernel 3.11 for omap2plus   Anil Kumar
• Build error in torvalds kernel 3.11 for omap2plus   Anil Kumar
• [PATCH v4 02/10] ARM: dts: list the CPU nodes for Exynos5250   Viresh Kumar
• [PATCH v4 02/10] ARM: dts: list the CPU nodes for Exynos5250   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• [PATCH 1/4] cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device   Viresh Kumar
• [PATCH 0/5] CPUFreq: Last set of updates for 3.13   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Viresh Kumar
• [PATCH v2 0/4] Remodel Tegra cpufreq driver to support Tegra series SoCs   Viresh Kumar
• [PATCH 02/10] clk: SPEAr: Staticize clk_frac_ops   Viresh Kumar
• [PATCH 000/228] CPUFreq: cleanup stuff for 3.13   Viresh Kumar
• [PATCH 001/228] cpufreq: Remove extra blank line   Viresh Kumar
• [PATCH 002/228] cpufreq: don't break string in print statements   Viresh Kumar
• [PATCH 003/228] cpufreq: remove __cpufreq_remove_dev()   Viresh Kumar
• [PATCH 004/228] cpufreq: Optimize cpufreq_frequency_table_verify()   Viresh Kumar
• [PATCH 005/228] cpufreq: rename __cpufreq_set_policy() as cpufreq_set_policy()   Viresh Kumar
• [PATCH 006/228] cpufreq: rewrite cpufreq_driver->flags using shift operator   Viresh Kumar
• [PATCH 007/228] cpufreq: use cpufreq_driver->flags to mark CPUFREQ_HAVE_GOVERNOR_PER_POLICY   Viresh Kumar
• [PATCH 008/228] cpufreq: add new routine cpufreq_verify_within_cpu_limits()   Viresh Kumar
• [PATCH 009/228] cpufreq: Add new helper cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 010/228] cpufreq: pxa: call cpufreq_frequency_table_get_attr()   Viresh Kumar
• [PATCH 011/228] cpufreq: s3cx4xx: call cpufreq_frequency_table_get_attr()   Viresh Kumar
• [PATCH 012/228] cpufreq: sparc: call cpufreq_frequency_table_get_attr()   Viresh Kumar
• [PATCH 013/228] cpufreq: acpi-cpufreq: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 014/228] cpufreq: arm_big_little: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 015/228] cpufreq: blackfin: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 016/228] cpufreq: cpufreq-cpu0: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 017/228] cpufreq: cris: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 018/228] cpufreq: davinci: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 019/228] cpufreq: dbx500: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 020/228] cpufreq: e_powersaver: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 021/228] cpufreq: elanfreq: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 022/228] cpufreq: exynos: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 023/228] cpufreq: ia64-acpi: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 024/228] cpufreq: imx6q: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 025/228] cpufreq: kirkwood: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 026/228] cpufreq: longhaul: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 027/228] cpufreq: loongson2: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 028/228] cpufreq: maple: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 029/228] cpufreq: omap: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 030/228] cpufreq: p4-clockmod: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 031/228] cpufreq: pasemi: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 032/228] cpufreq: pmac: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 033/228] cpufreq: powernow: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 034/228] cpufreq: ppc: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 035/228] cpufreq: pxa: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 036/228] cpufreq: s3cx4xx: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 037/228] cpufreq: s5pv210: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 038/228] cpufreq: sa11x0: Expose frequency table   Viresh Kumar
• [PATCH 039/228] cpufreq: sa11x0: let cpufreq core initialize struct policy fields   Viresh Kumar
• [PATCH 040/228] cpufreq: sc520: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 041/228] cpufreq: sh: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 042/228] cpufreq: sparc: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 043/228] cpufreq: spear: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 044/228] cpufreq: speedstep: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 045/228] cpufreq: tegra: use cpufreq_table_validate_and_show()   Viresh Kumar
• [PATCH 046/228] cpufreq: tegra: fix implementation of ->exit()   Viresh Kumar
• [PATCH 047/228] cpufreq: at32ap: add frequency table   Viresh Kumar
• [PATCH 048/228] cpufreq: arm_big_little: call cpufreq_frequency_table_put_attr()   Viresh Kumar
• [PATCH 049/228] cpufreq: blackfin: call cpufreq_frequency_table_put_attr()   Viresh Kumar
• [PATCH 050/228] cpufreq: exynos: call cpufreq_frequency_table_put_attr()   Viresh Kumar
• [PATCH 051/228] cpufreq: loongson2: call cpufreq_frequency_table_put_attr()   Viresh Kumar
• [PATCH 052/228] cpufreq: omap: call cpufreq_frequency_table_put_attr()   Viresh Kumar
• [PATCH 053/228] cpufreq: pxa: call cpufreq_frequency_table_put_attr()   Viresh Kumar
• [PATCH 054/228] cpufreq: sparc: call cpufreq_frequency_table_put_attr()   Viresh Kumar
• [PATCH 055/228] cpufreq: define generic .attr, .exit() and .verify() routines   Viresh Kumar
• [PATCH 056/228] cpufreq: acpi: Use generic cpufreq routines   Viresh Kumar
• [PATCH 057/228] cpufreq: arm_big_little: Use generic cpufreq routines   Viresh Kumar
• [PATCH 058/228] cpufreq: at32ap: Use generic cpufreq routines   Viresh Kumar
• [PATCH 059/228] cpufreq: blackfin: Use generic cpufreq routines   Viresh Kumar
• [PATCH 060/228] cpufreq: cpu0: Use generic cpufreq routines   Viresh Kumar
• [PATCH 061/228] cpufreq: cris: Use generic cpufreq routines   Viresh Kumar
• [PATCH 062/228] cpufreq: davinci: Use generic cpufreq routines   Viresh Kumar
• [PATCH 063/228] cpufreq: dbx500: Use generic cpufreq routines   Viresh Kumar
• [PATCH 064/228] cpufreq: e_powersaver: Use generic cpufreq routines   Viresh Kumar
• [PATCH 065/228] cpufreq: elanfreq: Use generic cpufreq routines   Viresh Kumar
• [PATCH 066/228] cpufreq: exynos: Use generic cpufreq routines   Viresh Kumar
• [PATCH 067/228] cpufreq: ia64-acpi: Use generic cpufreq routines   Viresh Kumar
• [PATCH 068/228] cpufreq: imx6q: Use generic cpufreq routines   Viresh Kumar
• [PATCH 069/228] cpufreq: kirkwood: Use generic cpufreq routines   Viresh Kumar
• [PATCH 070/228] cpufreq: longhaul: Use generic cpufreq routines   Viresh Kumar
• [PATCH 071/228] cpufreq: loongson2: Use generic cpufreq routines   Viresh Kumar
• [PATCH 072/228] cpufreq: maple: Use generic cpufreq routines   Viresh Kumar
• [PATCH 073/228] cpufreq: omap: Use generic cpufreq routines   Viresh Kumar
• [PATCH 074/228] cpufreq: p4-clockmod: Use generic cpufreq routines   Viresh Kumar
• [PATCH 075/228] cpufreq: pasemi: Use generic cpufreq routines   Viresh Kumar
• [PATCH 076/228] cpufreq: pmac: Use generic cpufreq routines   Viresh Kumar
• [PATCH 077/228] cpufreq: powernow: Use generic cpufreq routines   Viresh Kumar
• [PATCH 078/228] cpufreq: ppc-corenet: Use generic cpufreq routines   Viresh Kumar
• [PATCH 079/228] cpufreq: ppc_cbe: Use generic cpufreq routines   Viresh Kumar
• [PATCH 080/228] cpufreq: pxa: Use generic cpufreq routines   Viresh Kumar
• [PATCH 081/228] cpufreq: s3cx4xx: Use generic cpufreq routines   Viresh Kumar
• [PATCH 082/228] cpufreq: s5pv210: Use generic cpufreq routines   Viresh Kumar
• [PATCH 083/228] cpufreq: sa11x0: Use generic cpufreq routines   Viresh Kumar
• [PATCH 084/228] cpufreq: sc520: Use generic cpufreq routines   Viresh Kumar
• [PATCH 085/228] cpufreq: sh: Use generic cpufreq routines   Viresh Kumar
• [PATCH 086/228] cpufreq: sparc: Use generic cpufreq routines   Viresh Kumar
• [PATCH 087/228] cpufreq: spear: Use generic cpufreq routines   Viresh Kumar
• [PATCH 088/228] cpufreq: speedstep: Use generic cpufreq routines   Viresh Kumar
• [PATCH 089/228] cpufreq: tegra: Use generic cpufreq routines   Viresh Kumar
• [PATCH 090/228] cpufreq: call cpufreq_driver->get() after calling ->init()   Viresh Kumar
• [PATCH 091/228] cpufreq: acpi: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 092/228] cpufreq: arm_big_little: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 093/228] cpufreq: at32ap: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 094/228] cpufreq: blackfin: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 095/228] cpufreq: cpu0: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 096/228] cpufreq: nforce2: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 097/228] cpufreq: cris: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 098/228] cpufreq: davinci: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 099/228] cpufreq: dbx500: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 100/228] cpufreq: e_powersaver: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 101/228] cpufreq: elanfreq: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 102/228] cpufreq: exynos: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 103/228] cpufreq: gx: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 104/228] cpufreq: ia64-acpi: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 105/228] cpufreq: imx6q: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 106/228] cpufreq: integrator: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 107/228] cpufreq: kirkwood: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 108/228] cpufreq: longhaul: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 109/228] cpufreq: loongson2: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 110/228] cpufreq: maple: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 111/228] cpufreq: omap: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 112/228] cpufreq: p4: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 113/228] cpufreq: pcc: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 114/228] cpufreq: pmac: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 115/228] cpufreq: powernow: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 116/228] cpufreq: ppc: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 117/228] cpufreq: pxa: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 118/228] cpufreq: s3c: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 119/228] cpufreq: s5pv210: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 120/228] cpufreq: sa11x0: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 121/228] cpufreq: sc520_freq: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 122/228] cpufreq: sh: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 123/228] cpufreq: spear: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 124/228] cpufreq: speedstep: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 125/228] cpufreq: tegra: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 126/228] cpufreq: unicore2: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 127/228] cpufreq: create cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 128/228] cpufreq: remove CONFIG_CPU_FREQ_TABLE   Viresh Kumar
• [PATCH 129/228] cpufreq: cpu0: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 130/228] cpufreq: cris: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 131/228] cpufreq: davinci: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 132/228] cpufreq: dbx500: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 133/228] cpufreq: exynos: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 134/228] cpufreq: imx6q: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 135/228] cpufreq: kirkwood: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 136/228] cpufreq: loongson2: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 137/228] cpufreq: maple: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 138/228] cpufreq: omap: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 139/228] cpufreq: pasemi: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 140/228] cpufreq: pmac32: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 141/228] cpufreq: pmac64: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 142/228] cpufreq: s3c: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 143/228] cpufreq: s5pv210: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 144/228] cpufreq: sa11x0: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 145/228] cpufreq: spear: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 146/228] cpufreq: tegra: use cpufreq_generic_init() routine   Viresh Kumar
• [PATCH 147/228] cpufreq: Implement light weight ->target_index() routine   Viresh Kumar
• [PATCH 148/228] cpufreq: acpi: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 149/228] cpufreq: arm_big_little: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 150/228] cpufreq: at32ap: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 151/228] cpufreq: blackfin: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 152/228] cpufreq: cpu0: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 153/228] cpufreq: cris: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 154/228] cpufreq: davinci: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 155/228] cpufreq: dbx500: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 156/228] cpufreq: e_powersaver: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 157/228] cpufreq: elanfreq: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 158/228] cpufreq: exynos: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 159/228] cpufreq: ia64: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 160/228] cpufreq: imx6q: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 161/228] cpufreq: kirkwood: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 162/228] cpufreq: longhaul: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 163/228] cpufreq: loongson2: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 164/228] cpufreq: maple: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 165/228] cpufreq: omap: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 166/228] cpufreq: p4: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 167/228] cpufreq: pasemi: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 168/228] cpufreq: pmac32: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 169/228] cpufreq: powernow: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 170/228] cpufreq: ppc: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 171/228] cpufreq: pxa: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 172/228] cpufreq: s3c2416: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 173/228] cpufreq: s3c64xx: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 174/228] cpufreq: s5pv210: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 175/228] cpufreq: sa11x0: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 176/228] cpufreq: sc520: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 177/228] cpufreq: sparc: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 178/228] cpufreq: SPEAr: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 179/228] cpufreq: speedstep: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 180/228] cpufreq: tegra: Convert to light weight ->target_index() routine   Viresh Kumar
• [PATCH 181/228] cpufreq: move freq change notifications to cpufreq core   Viresh Kumar
• [PATCH 182/228] cpufreq: acpi: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 183/228] cpufreq: arm_big_little: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 184/228] cpufreq: at32ap: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 185/228] cpufreq: blackfin: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 186/228] cpufreq: cpu0: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 187/228] cpufreq: cris: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 188/228] cpufreq: davinci: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 189/228] cpufreq: dbx500: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 190/228] cpufreq: e_powersaver: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 191/228] cpufreq: elanfreq: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 192/228] cpufreq: exynos: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 193/228] cpufreq: ia64-acpi: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 194/228] cpufreq: imx6q: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 195/228] cpufreq: kirkwood: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 196/228] cpufreq: loongson2: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 197/228] cpufreq: maple: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 198/228] cpufreq: omap: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 199/228] cpufreq: p4-clockmod: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 200/228] cpufreq: pasemi: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 201/228] cpufreq: pmac: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 202/228] cpufreq: ppc: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 203/228] cpufreq: pxa: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 204/228] cpufreq: s3c: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 205/228] cpufreq: s5pv210: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 206/228] cpufreq: sa11x0: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 207/228] cpufreq: sc520: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 208/228] cpufreq: sparc: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 209/228] cpufreq: SPEAr: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 210/228] cpufreq: speedstep: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 211/228] cpufreq: tegra: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 212/228] cpufreq: tegra: remove target_cpu_speed[] array   Viresh Kumar
• [PATCH 213/228] cpufreq: create cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 214/228] cpufreq: arm_big_little: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 215/228] cpufreq: at32ap: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 216/228] cpufreq: cpu0: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 217/228] cpufreq: davinci: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 218/228] cpufreq: dbx500: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 219/228] cpufreq: exynos: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 220/228] cpufreq: imx6q: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 221/228] cpufreq: loongson2: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 222/228] cpufreq: omap: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 223/228] cpufreq: ppc: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 224/228] cpufreq: s3c: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 225/228] cpufreq: s5pv210: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 226/228] cpufreq: spear: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 227/228] cpufreq: tegra: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 228/228] cpufreq: unicore2: use cpufreq_generic_get() routine   Viresh Kumar
• [PATCH 063/228] cpufreq: dbx500: Use generic cpufreq routines   Viresh Kumar
• [PATCH 181/228] cpufreq: move freq change notifications to cpufreq core   Viresh Kumar
• [PATCH 206/228] cpufreq: sa11x0: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 206/228] cpufreq: sa11x0: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 195/228] cpufreq: kirkwood: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 206/228] cpufreq: sa11x0: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 106/228] cpufreq: integrator: don't initialize part of policy that is set by core too   Viresh Kumar
• [PATCH 012/228] cpufreq: sparc: call cpufreq_frequency_table_get_attr()   Viresh Kumar
• [PATCH 211/228] cpufreq: tegra: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 211/228] cpufreq: tegra: remove calls to cpufreq_notify_transition()   Viresh Kumar
• [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*   Viresh Kumar
• [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*   Viresh Kumar
• [PATCH v4 2/3] Cpufreq: s5pv210 cpufreq fixes for CCF   Viresh Kumar
• [PATCH] ARM: dts: Update arch timer node with clock frequency   Yuvaraj Kumar
• [PATCH v6 07/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Cho KyongHo
• [PATCH v6 07/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Cho KyongHo
• [PATCH v6 07/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Cho KyongHo
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Prabhakar Lad
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Prabhakar Lad
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Prabhakar Lad
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Prabhakar Lad
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Prabhakar Lad
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Prabhakar Lad
• new binutils needed for arm in 3.12-rc1   Rob Landley
• new binutils needed for arm in 3.12-rc1   Rob Landley
• new binutils needed for arm in 3.12-rc1   Rob Landley
• new binutils needed for arm in 3.12-rc1   Rob Landley
• new binutils needed for arm in 3.12-rc1   Rob Landley
• new binutils needed for arm in 3.12-rc1   Rob Landley
• new binutils needed for arm in 3.12-rc1   Rob Landley
• new binutils needed for arm in 3.12-rc1   Rob Landley
• [PATCH 0/2] delete premature free_irq   Julia Lawall
• [PATCH 2/2] drivers:net: delete premature free_irq   Julia Lawall
• [PATCH] clockevent: exynos_mct: fix lockdep warning   Ming Lei
• [PATCH] clockevent: exynos_mct: fix lockdep warning   Ming Lei
• kexec/kdump for arm64   Geoff Levand
• [PATCH 2/2] ARM: EXYNOS: add cpuidle-exynos.max_states kernel parameter   Daniel Lezcano
• [PATCH 1/2] ARM: EXYNOS: convert cpuidle driver to be a platform driver   Daniel Lezcano
• [PATCH 2/2] ARM: EXYNOS: add cpuidle-exynos.max_states kernel parameter   Daniel Lezcano
• [PATCH 2/2] ARM: EXYNOS: add cpuidle-exynos.max_states kernel parameter   Daniel Lezcano
• [GIT PULL] ARM/ARM64 architected timer updates for v3.12, take 2   Daniel Lezcano
• [GIT PULL] ARM/ARM64 architected timer updates for v3.12, take 2   Daniel Lezcano
• [PATCH 2/2] ARM: EXYNOS: add cpuidle-exynos.max_states kernel parameter   Daniel Lezcano
• [PATCH V3 3/4] mmc: mmci: Adapt to register write restrictions   Daniel Lezcano
• [PATCH V3 4/4] mmc: mmci: Save and restore register context   Daniel Lezcano
• [PATCH v3 0/5] Armada XP clocks for timer   Daniel Lezcano
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Daniel Lezcano
• [PATCH v2 00/12] CPU idle for Armada XP   Daniel Lezcano
• [PATCH v2 11/12] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Daniel Lezcano
• [PATCH v2 11/12] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Daniel Lezcano
• [PATCH v2] drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries   Daniel Lezcano
• at91sam9263 not booting on 3.12-rc1   Daniel Lezcano
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   Daniel Lezcano
• [PATCH v6 RESEND 0/5] ARM/ARM64 architected timer updates   Daniel Lezcano
• [PATCH v2 1/4] clockchips: Add FEAT_PERCPU clockevent flag   Daniel Lezcano
• [PATCH v2 2/4] clocksource/arm_global_timer: Set FEAT_PERCPU flag   Daniel Lezcano
• [PATCH v2 3/4] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Daniel Lezcano
• [PATCH v2 0/4] arm: zynq: Enable global timer   Daniel Lezcano
• [PATCH] clocksource: em_sti: Set cpu_possible_mask to fix SMP broadcast   Daniel Lezcano
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Daniel Lezcano
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   Daniel Lezcano
• [GIT PULL 3.12-rc2 fixes] clocksource: Several fixes for 3.12-rc2   Daniel Lezcano
• [PATCH] clockevent: exynos_mct: fix lockdep warning   Daniel Lezcano
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   Daniel Lezcano
• [GIT PULL] ARM/ARM64 architected timer updates for v3.13   Daniel Lezcano
• [PATCH v2 0/4] arm: zynq: Enable global timer   Daniel Lezcano
• [PATCH] clockevent: exynos_mct: fix lockdep warning   Daniel Lezcano
• at91sam9263 not booting on 3.12-rc1   Daniel Lezcano
• [RFC PATCH 0/2] ARM: at91: cpuidle: encapsulate and move the driver to drivers/cpuidle   Daniel Lezcano
• [RFC PATCH 1/2] ARM: at91: cpuidle: convert to platform driver   Daniel Lezcano
• [RFC PATCH 2/2] ARM: at91: cpuidle: Move driver to drivers/cpuidle   Daniel Lezcano
• [RFC PATCH] ARM: zynq: cpuidle: convert to platform driver   Daniel Lezcano
• [GIT PULL 3.12-rc2 fixes] clocksource: Several fixes for 3.12-rc2   Daniel Lezcano
• [RFC PATCH] ARM: zynq: cpuidle: convert to platform driver   Daniel Lezcano
• [PATCH 1/2] ARM: zynq: cpuidle: Remove useless compatibility string   Daniel Lezcano
• [PATCH 2/2] ARM: zynq: cpuidle: convert to platform driver   Daniel Lezcano
• [PATCH 1/2] ARM: zynq: cpuidle: Remove useless compatibility string   Daniel Lezcano
• [PATCH 1/2] ARM: zynq: cpuidle: Remove useless compatibility string   Daniel Lezcano
• [PATCH 1/6] cpuidle: calxeda: add support to use PSCI calls   Daniel Lezcano
• [PATCH 2/6] cpuidle: calxeda: add cpu_pm_enter/exit calls   Daniel Lezcano
• [PATCH 3/6] cpuidle: calxeda: add ecx-2000 support   Daniel Lezcano
• [PATCH] ARM: highbank: cpuidle: convert to platform driver   Daniel Lezcano
• [PATCH] ARM: highbank: cpuidle: convert to platform driver   Daniel Lezcano
• [PATCH] clockevent: exynos_mct: fix lockdep warning   Daniel Lezcano
• [PATCH 1/2] ARM: zynq: cpuidle: Remove useless compatibility string   Daniel Lezcano
• [PATCH] ARM: ux500: cpuidle: fix section mismatch   Daniel Lezcano
• [PATCH] ARM: ux500: u8500_defconfig: add missing cpuidle option   Daniel Lezcano
• [GIT PULL v2] drivers/clocksource: sched_clock_register() conversion for 3.13 (via tip/timers/core)   Daniel Lezcano
• [GIT PULL]: clocksource: new material for 3.13   Daniel Lezcano
• [GIT PULL]: clocksource: new material for 3.13   Daniel Lezcano
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Frank Li
• [PATCHv3 0/4] Add Freescale FTM PWM driver.   Xiubo Li
• [PATCHv3 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li
• [PATCHv3 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.   Xiubo Li
• [PATCHv3 3/4] ARM: dts: Enables FTM PWM device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCHv3 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Xiubo Li
• [PATCHv4 0/4] Add Freescale FTM PWM driver.   Xiubo Li
• [PATCHv4 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li
• [PATCHv4 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.   Xiubo Li
• [PATCHv4 3/4] ARM: dts: Enables FTM PWM device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCHv4 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Xiubo Li
• [PATCHv5 0/4] Add Freescale FTM PWM driver.   Xiubo Li
• [PATCHv5 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li
• [PATCHv5 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.   Xiubo Li
• [PATCHv5 3/4] ARM: dts: Enables FTM PWM device for Vybrid VF610 TOWER board.   Xiubo Li
• [PATCHv5 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Xiubo Li
• [PATCH] Add dmi driver support on arm   Yi Li
• [PATCH] ARM:DMI: Add dmi driver support on arm   Yi Li
• [PATCH 4/4] Documentation: Add device tree bindings for Freescale FTM PWM   Xiubo Li-B47053
• [PATCHv2 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Xiubo Li-B47053
• [PATCHv2 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li-B47053
• [PATCHv2 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li-B47053
• [PATCH 4/4] Documentation: Add device tree bindings for Freescale FTM PWM   Xiubo Li-B47053
• [PATCHv2 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li-B47053
• [PATCHv3 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li-B47053
• [PATCHv3 2/4] ARM: dts: Add Freescale FTM PWM node for VF610.   Xiubo Li-B47053
• [PATCHv3 1/4] pwm: Add Freescale FTM PWM driver support   Xiubo Li-B47053
• [PATCHv4 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Xiubo Li-B47053
• [PATCH v4 12/19] cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes   Guennadi Liakhovetski
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Guennadi Liakhovetski
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Guennadi Liakhovetski
• [PATCH v2 00/03] ARM: shmobile: r8a7790 APMU SMP support   Guennadi Liakhovetski
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Guennadi Liakhovetski
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Guennadi Liakhovetski
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Guennadi Liakhovetski
• [PATCH 1/4] cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device   Guennadi Liakhovetski
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Guennadi Liakhovetski
• [PATCH 1/4] cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device   Guennadi Liakhovetski
• [PATCH 4/4] ARM: shmobile: change dev_id to cpu0 while registering cpu clock   Guennadi Liakhovetski
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Guennadi Liakhovetski
• [PATCH] DMA: ste_dma40: use a power of 2 check   Guennadi Liakhovetski
• [PATCH v2 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq   Guennadi Liakhovetski
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Grant Likely
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Grant Likely
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Grant Likely
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Grant Likely
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Grant Likely
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Grant Likely
• [PATCH 2/2] arm: zynq: Enable arm_global_timer   Grant Likely
• [PATCH] memory: add a basic OF-based memory driver   Grant Likely
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Grant Likely
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Grant Likely
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Grant Likely
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Grant Likely
• [PATCH 18/28] of: create default early_init_dt_add_memory_arch   Grant Likely
• [PATCH 19/28] arm: set initrd_start/initrd_end for fdt scan   Grant Likely
• [PATCH 20/28] arm64: set initrd_start/initrd_end for fdt scan   Grant Likely
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Grant Likely
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Grant Likely
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Grant Likely
• [PATCHv6 00/13] MSI support for Marvell EBU PCIe driver   Grant Likely
• [PATCH 18/28] of: create default early_init_dt_add_memory_arch   Grant Likely
• [PATCH 22/51] DMA-API: amba: get rid of separate dma_mask   Grant Likely
• [PATCH v4 5/5] clk: dt: binding for basic gate clock   Tony Lindgren
• [RFC 3/4] Misc: SRAM: Hack for allowing executable code in SRAM.   Tony Lindgren
• [PATCH v4 2/4] ARM: dts: am335x-boneblack: add eMMC DT entry   Tony Lindgren
• [PATCH 0/2] WLAN regression fixes for omap4 after moving to DT based booting   Tony Lindgren
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Tony Lindgren
• [PATCH 2/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze   Tony Lindgren
• [PATCH 0/2] WLAN regression fixes for omap4 after moving to DT based booting   Tony Lindgren
• [PATCH v4 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1   Tony Lindgren
• [PATCHv6 01/45] CLK: TI: Add DPLL clock support   Tony Lindgren
• [PATCH v4 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1   Tony Lindgren
• [PATCH v2 2/2] RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH] ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y   Tony Lindgren
• [PATCH] ARM: OMAP: fix return value check in omap_device_build_from_dt()   Tony Lindgren
• ARM: OMAP2: Make MACH_OMAP3EVM select NOP_USB_XCEIV   Tony Lindgren
• [PATCH] ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally   Tony Lindgren
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Tony Lindgren
• [PATCH v2 2/2] RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Tony Lindgren
• [PATCH v2 2/2] RX-51: ARM errata 430973 workaround   Tony Lindgren
• [RFCv2 2/3] ARM: OMAP2+: HSI: Introduce OMAP SSI driver   Tony Lindgren
• [PATCH v3 2/2] RX-51: ARM errata 430973 workaround   Tony Lindgren
• [GIT PULL 2/2] omap dt fixes against v3.12-rc1   Tony Lindgren
• [GIT PULL 1/2] omap fixes against v3.12-rc1   Tony Lindgren
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Tony Lindgren
• [PATCH 1/2] ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard   Tony Lindgren
• [PATCH v2 3/9] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data   Tony Lindgren
• [PATCH 0/4] Clean up legacy platform data handling for omaps for v3.13   Tony Lindgren
• [PATCH 1/4] ARM: OMAP2+: Always build in board-generic   Tony Lindgren
• [PATCH 2/4] ARM: OMAP2+: Add quirk support for legacy platform data init   Tony Lindgren
• [PATCH 3/4] ARM: OMAP2+: Use pdata quirk support for board-generic.c   Tony Lindgren
• [PATCH 4/4] ARM: OMAP2+: Use pdata quirks for wl12xx legacy init   Tony Lindgren
• [PATCH 1/3] ARM: OMAP2: HACK: hardcode hsmmc2 input clock source for N950/N9   Tony Lindgren
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Tony Lindgren
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Tony Lindgren
• [PATCH v2 2/2] RX-51: ARM errata 430973 workaround   Tony Lindgren
• [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP   Tony Lindgren
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Tony Lindgren
• [PATCH v2 1/3] ARM: OMAP2: pdata-quirks: set internal clock source for MMC2 on N950/N9   Tony Lindgren
• [PATCH 4/4] ARM: OMAP2+: Use pdata quirks for wl12xx legacy init   Tony Lindgren
• [PATCH 0/2] patches to enable SDIO interrupt support for omap_hsmmc for v3.13   Tony Lindgren
• [PATCH 1/2] mmc: omap_hsmmc: Fix context save and restore for DT   Tony Lindgren
• [PATCH 2/2] mmc: omap_hsmmc: Enable SDIO interrupt   Tony Lindgren
• [PATCH 2/2] mmc: omap_hsmmc: Enable SDIO interrupt   Tony Lindgren
• [PATCH v2 0/2] Add early_ioremap()/early_memremap() support to arm   Leif Lindholm
• [PATCH v2 1/2] Documentation: arm: early_ioremap/early_memremap   Leif Lindholm
• [PATCH v2 2/2] arm: add early_ioremap support   Leif Lindholm
• [PATCH v2 2/2] arm: add early_ioremap support   Leif Lindholm
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [PATCH v2] ARM: highbank: fix debug uart virtual address for LPAE   Russell King - ARM Linux
• [PATCH v4] ARM: Add check for Cortex-A15 errata 798181 ECO   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [PATCH 08/14] ASoC: kirkwood: prefer external clock over internal clock   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [PATCH v4] ARM: Add check for Cortex-A15 errata 798181 ECO   Russell King - ARM Linux
• [alsa-devel] [PATCH 00/14] SPDIF support   Russell King - ARM Linux
• [PATCH v4] ARM: Add check for Cortex-A15 errata 798181 ECO   Russell King - ARM Linux
• [PATCH 13/14] ASoC: kirkwood: add SPDIF output support   Russell King - ARM Linux
• [PATCH 13/14] ASoC: kirkwood: add SPDIF output support   Russell King - ARM Linux
• Inte IOP Xscale updates   Russell King - ARM Linux
• Unhandled prefetch abort on mirabox with 3.11-rc7   Russell King - ARM Linux
• kmalloc memory slower than malloc   Russell King - ARM Linux
• [patch] iio: mxs-lradc: use helper functions to simplify the code   Russell King - ARM Linux
• [PATCH v2 1/2] Documentation: arm: early_ioremap/early_memremap   Russell King - ARM Linux
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russell King - ARM Linux
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russell King - ARM Linux
• [PATCH] arm: LLVMLinux: Calculate pt_regs address from fp   Russell King - ARM Linux
• [PATCH 1/5] arm: LLVMLinux: Add current_stack_pointer macro for ARM   Russell King - ARM Linux
• [PATCH 2/5] arm: LLVMLinux: use current_stack_pointer for percpu   Russell King - ARM Linux
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Russell King - ARM Linux
• Inte IOP Xscale updates   Russell King - ARM Linux
• Build error in torvalds kernel 3.11 for omap2plus   Russell King - ARM Linux
• Build error in torvalds kernel 3.11 for omap2plus   Russell King - ARM Linux
• Build error in torvalds kernel 3.11 for omap2plus   Russell King - ARM Linux
• kmalloc memory slower than malloc   Russell King - ARM Linux
• kmalloc memory slower than malloc   Russell King - ARM Linux
• kmalloc memory slower than malloc   Russell King - ARM Linux
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Russell King - ARM Linux
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Russell King - ARM Linux
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Russell King - ARM Linux
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Russell King - ARM Linux
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   Russell King - ARM Linux
• [PATCH 1/4] Add smp support for Allwinner A20(sunxi 7i).   Russell King - ARM Linux
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Russell King - ARM Linux
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Russell King - ARM Linux
• kmalloc memory slower than malloc   Russell King - ARM Linux
• [PATCH] dma: use %pa to print dma_addr_t   Russell King - ARM Linux
• [PATCH 1/2] video: ARM CLCD: Add DT support   Russell King - ARM Linux
• [PATCH 120/228] cpufreq: sa11x0: don't initialize part of policy that is set by core too   Russell King - ARM Linux
• [PATCH 038/228] cpufreq: sa11x0: Expose frequency table   Russell King - ARM Linux
• [PATCH 039/228] cpufreq: sa11x0: let cpufreq core initialize struct policy fields   Russell King - ARM Linux
• [PATCH 175/228] cpufreq: sa11x0: Convert to light weight ->target_index() routine   Russell King - ARM Linux
• [PATCH 144/228] cpufreq: sa11x0: use cpufreq_generic_init() routine   Russell King - ARM Linux
• [PATCH 181/228] cpufreq: move freq change notifications to cpufreq core   Russell King - ARM Linux
• [PATCH 206/228] cpufreq: sa11x0: remove calls to cpufreq_notify_transition()   Russell King - ARM Linux
• [PATCH 083/228] cpufreq: sa11x0: Use generic cpufreq routines   Russell King - ARM Linux
• [PATCH 106/228] cpufreq: integrator: don't initialize part of policy that is set by core too   Russell King - ARM Linux
• [PATCH 206/228] cpufreq: sa11x0: remove calls to cpufreq_notify_transition()   Russell King - ARM Linux
• [PATCH 206/228] cpufreq: sa11x0: remove calls to cpufreq_notify_transition()   Russell King - ARM Linux
• dev->of_node overwrite can cause device loading with different driver   Russell King - ARM Linux
• dev->of_node overwrite can cause device loading with different driver   Russell King - ARM Linux
• [PATCH] arm: Fix build error with context tracking calls   Russell King - ARM Linux
• [PATCH] ARM: multi_v7: add HREFv60 to multi_v7 defconfig   Russell King - ARM Linux
• mvneta: oops in __rcu_read_lock on mirabox   Russell King - ARM Linux
• mvneta: oops in __rcu_read_lock on mirabox   Russell King - ARM Linux
• mvneta: oops in __rcu_read_lock on mirabox   Russell King - ARM Linux
• mvneta: oops in __rcu_read_lock on mirabox   Russell King - ARM Linux
• RFD on DMA_BIT_MASK and LPAE   Russell King - ARM Linux
• [PATCH] [PATCH] clocksource: tcb: fix min_delta calculation   Russell King - ARM Linux
• [PATCH] ARM: bcm: Add DEBUG_LL console support   Russell King - ARM Linux
• BUG: sleeping function called from invalid context at arch/arm/mm/fault.c:301   Russell King - ARM Linux
• BUG: sleeping function called from invalid context at arch/arm/mm/fault.c:301   Russell King - ARM Linux
• [PATCH v3] ARM: pxa: sharpsl_param.c: fix invalid memory access   Russell King - ARM Linux
• [PATCH] ASoC: generic: Add generic DT based simple codec   Russell King - ARM Linux
• [PATCH 00/51] DMA mask changes   Russell King - ARM Linux
• [PATCH 42/51] DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks   Russell King - ARM Linux
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()   Russell King - ARM Linux
• [PATCH 01/51] DMA-API: provide a helper to set both DMA and coherent DMA masks   Russell King - ARM Linux
• [PATCH v2 1/2] ASoC: kirkwood: clk: probe defer when clock not yet ready   Russell King - ARM Linux
• [PATCH] OMAP/serial: Fix division by zero exception on 3M+ baud rates   Russell King - ARM Linux
• [PATCH v2 1/2] ASoC: kirkwood: clk: probe defer when clock not yet ready   Russell King - ARM Linux
• [PATCH v2 1/2] ASoC: kirkwood: clk: probe defer when clock not yet ready   Russell King - ARM Linux
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Russell King - ARM Linux
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Russell King - ARM Linux
• [PATCH 24/51] DMA-API: dma: pl330: add dma_set_mask_and_coherent() call   Russell King - ARM Linux
• [PATCH v3 0/5] kernel mode NEON support   Russell King - ARM Linux
• [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   Russell King - ARM Linux
• [PATCH] ARM: STi: Add cpu hotplug support   Russell King - ARM Linux
• [alsa-devel] [PATCH 43/51] DMA-API: dma: edma.c: no need to explicitly initialize DMA masks   Russell King - ARM Linux
• [RFC V2] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Russell King - ARM Linux
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Russell King - ARM Linux
• [PATCH] video: mmp: drop needless devm cleanup   Russell King - ARM Linux
• [PATCH] clk: fix function name in devm_clk_put kernel-doc comment   Russell King - ARM Linux
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Russell King - ARM Linux
• [PATCH 36/51] DMA-API: usb: use dma_set_coherent_mask()   Russell King - ARM Linux
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Russell King - ARM Linux
• [PATCH] ARM: kvm: rename cpu_reset to avoid name clash   Russell King - ARM Linux
• [PATCH] ARM: include: asm: atomic.h: use type cast 's64' for the return value of atomic64_add_return().   Russell King - ARM Linux
• [PATCH] ASoC: kirkwood: add S/PDIF support   Russell King - ARM Linux
• [PATCH] ARM: sa1100: remove complex GPIO interface   Russell King - ARM Linux
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Russell King - ARM Linux
• [PATCH] ASoC: kirkwood: simplify clock handling   Russell King - ARM Linux
• [PATCH] ASoC: kirkwood: simplify clock handling   Russell King - ARM Linux
• mm: insure topdown mmap chooses addresses above security minimum   Russell King - ARM Linux
• new binutils needed for arm in 3.12-rc1   Russell King - ARM Linux
• new binutils needed for arm in 3.12-rc1   Russell King - ARM Linux
• [PATCH 28/51] DMA-API: sound: fix dma mask handling in a lot of drivers   Russell King - ARM Linux
• [PATCH v2] [media] marvell-ccic: simplify and fix clk handling (a bit)   Russell King - ARM Linux
• [PATCH] ASoc: kirkwood: Extend the min and max number of bytes per period   Russell King - ARM Linux
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()   Russell King - ARM Linux
• imprecise external abort using the flexcan driver on i.MX6Q   Russell King - ARM Linux
• [PATCH 2/3] dma: mxs-dma: Track number of irqs for callback   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• [PATCH 00/51] DMA mask changes   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• About atags_proc buffer size   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• About atags_proc buffer size   Russell King - ARM Linux
• [PATCH v2] ARM: new platform for Energy Micro's EFM32 Cortex-M3 SoCs   Russell King - ARM Linux
• device tree binding documentation outdated   Russell King - ARM Linux
• [PATCH] ARM: imx: i.mx6d/q: disable the double linefill feature of PL310   Jason Liu
• [PATCH v2 1/1] ARM: imx: i.mx6d/q: disable the double linefill feature of PL310   Jason Liu
• [PATCH] ARM: imx: i.mx6d/q: disable the double linefill feature of PL310   Jason Liu
• [RFC PATCH v2 04/25] smp, ARM: kill SMP single function call interrupt   Jiang Liu
• [RFC PATCH v2 05/25] smp, ARM64: kill SMP single function call interrupt   Jiang Liu
• [PATCH v1 0/7] Optimize jump label implementation on ARM64   Jiang Liu
• [PATCH v1 1/7] arm64: introduce basic aarch64 instruction decoding helpers   Jiang Liu
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Jiang Liu
• [PATCH v1 3/7] arm64: move encode_insn_immediate() from module.c to insn.c   Jiang Liu
• [PATCH v1 4/7] arm64: introduce aarch64_insn_gen_{nop|branch_imm}() helper functions   Jiang Liu
• [PATCH v1 5/7] arm64, jump label: detect %c support for ARM64   Jiang Liu
• [PATCH v1 6/7] arm64, jump label: optimize jump label implementation   Jiang Liu
• [PATCH v1 7/7] jump_label: use defined macros instead of hard-coding for better readability   Jiang Liu
• [PATCH v1 7/7] jump_label: use defined macros instead of hard-coding for better readability   Jiang Liu
• [PATCH v1 1/7] arm64: introduce basic aarch64 instruction decoding helpers   Jiang Liu
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Jiang Liu
• [RFT PATCH v1 0/7] enable FPSIMD lazy save and restore for arm64   Jiang Liu
• [RFT PATCH v1 1/7] arm64: fix possible invalid FPSIMD initialization state   Jiang Liu
• [RFT PATCH v1 2/7] arm64: restore FPSIMD to default state for kernel and signal contexts   Jiang Liu
• [RFT PATCH v1 3/7] arm64: implement basic lazy save and restore for FPSIMD registers   Jiang Liu
• [RFT PATCH v1 4/7] arm64: provide boot option "eagerfpu" to control FPSIMD restore policy   Jiang Liu
• [RFT PATCH v1 5/7] arm64: reuse FPSIMD hardware context if possible   Jiang Liu
• [RFT PATCH v1 6/7] amd64: avoid saving and restoring FPSIMD registers until threads access them   Jiang Liu
• [RFT PATCH v1 7/7] arm64: disable lazy load if FPSIMD registers are frequently used   Jiang Liu
• [RFT PATCH v1 2/7] arm64: restore FPSIMD to default state for kernel and signal contexts   Jiang Liu
• [RFT PATCH v1 6/7] amd64: avoid saving and restoring FPSIMD registers until threads access them   Jiang Liu
• [RFT PATCH v1 0/7] enable FPSIMD lazy save and restore for arm64   Jiang Liu
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Jiang Liu
• [PATCH 4/4] clk: tegra114: table driven PMC clock init   Joseph Lo
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Aaron Lu
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Aaron Lu
• [PATCH 3/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH v5 3/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH v6 3/3] dma: Add Freescale eDMA engine driver support   Jingchang Lu
• [PATCH v2 00/12] CPU idle for Armada XP   Andrew Lunn
• [PATCH v2 00/12] CPU idle for Armada XP   Andrew Lunn
• [PATCH 195/228] cpufreq: kirkwood: remove calls to cpufreq_notify_transition()   Andrew Lunn
• [PATCH] ARM: Kirkwood: Add missing DT reg property to cpu at 0   Andrew Lunn
• [PATCH 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Andrew Lunn
• [PATCH 069/228] cpufreq: kirkwood: Use generic cpufreq routines   Andrew Lunn
• [PATCH 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Andrew Lunn
• [PATCH 11/26] ARM: dove: remove custom .init_time hook   Andrew Lunn
• [PATCH 15/26] ARM: kirkwood: remove custom .init_time hook   Andrew Lunn
• [PATCH 11/26] ARM: dove: remove custom .init_time hook   Andrew Lunn
• [PATCH 1/5] clk: mvebu: Add core-divider clock   Andrew Lunn
• [PATCH 2/5] ARM: mvebu: Add Core Divider clock device-tree binding   Andrew Lunn
• [PATCH 1/5] clk: mvebu: Add core-divider clock   Andrew Lunn
• [PATCH 0/4] Kirkwood: minor cleanups   Andrew Lunn
• [PATCH 3/4] clk: kirkwood: Add CLK_IGNORE_UNUSED to ethernet ge0 and ge1 clocks   Andrew Lunn
• [PATCH 1/3] irqchip: irq-dove: Add PMU interrupt controller.   Andrew Lunn
• [PATCH 2/3] ARM: Dove: Add DT node for PMU interrupt controller.   Andrew Lunn
• [PATCH 3/3] ARM: Dove: Add RTC interrupt via PMU interrupt controller.   Andrew Lunn
• [PATCHv6 1/2] ARM: sunxi: Initial support for Allwinner's Security ID fuses   Emilio López
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Emilio López
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   Emilio López
• [PATCH RFC] of: add a basic memory driver   Emilio López
• [PATCH RFC] of: add a basic memory driver   Emilio López
• [PATCH] memory: add a basic OF-based memory driver   Emilio López
• [PATCH] memory: add a basic OF-based memory driver   Emilio López
• [PATCH] clk: composite: .determine_rate support   Emilio López
• [PATCH 0/3] sunxi clock fixes   Emilio López
• [PATCH 1/3] clk: sunxi: factors: fix off-by-one masks   Emilio López
• [PATCH 2/3] clk: sunxi: factors: clear variables before using them   Emilio López
• [PATCH 3/3] clk: sunxi: protect core clocks from accidental shutdown   Emilio López
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Emilio López
• [PATCH 2/5] clocksource: Add Allwinner SoCs HS timers driver   Emilio López
• [PATCH 00/10] clk: sunxi: PLL4/5/6, mod0 and mbus support   Emilio López
• [PATCH 01/10] clk: sunxi: register factors clocks behind composite   Emilio López
• [PATCH 02/10] clk: sunxi: add gating support to PLL1   Emilio López
• [PATCH 03/10] ARM: sunxi: add PLL4 support   Emilio López
• [PATCH 04/10] clk: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH 05/10] ARM: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH 06/10] clk: sunxi: mod0 support   Emilio López
• [PATCH 07/10] ARM: sun4i: dt: mod0 clocks   Emilio López
• [PATCH 08/10] ARM: sun5i: dt: mod0 clocks   Emilio López
• [PATCH 09/10] ARM: sun7i: dt: mod0 clocks   Emilio López
• [PATCH 10/10] ARM: sunxi: dt: add nodes for the mbus clock   Emilio López
• [PATCH 2/5] clocksource: Add Allwinner SoCs HS timers driver   Emilio López
• [PATCH 04/10] clk: sunxi: add PLL5 and PLL6 support   Emilio López
• [PATCH 06/10] clk: sunxi: mod0 support   Emilio López
• [PATCH] arm, kbuild: make "make install" not depend on vmlinux   Yann E. MORIN
• [PATCH RFC 2/2] PM / Hibernate: add section for resume options   Pavel Machek
• [PATCH v2 RFT 2/2] PM / Hibernate: add section for resume options   Pavel Machek
• [PATCH 1/3] arm: socfpga: Set the SDMMC clock phase in system manager   Pavel Machek
• [PATCH 3/3] arm: dts: socfpga: Add support for SD/MMC   Pavel Machek
• [PATCH] arm: socfpga: Fix incorrect sdmmc clock name   Pavel Machek
• [RESEND PATCHv3 1/2] clocksource: dw_apb_timer: Move timer defines to header file.   Pavel Machek
• [RESEND PATCHv3 1/2] clocksource: dw_apb_timer: Move timer defines to header file.   Pavel Machek
• [PATCHv4 2/2] clocksource: dw_apb_timer_of: Fix read_sched_clock   Pavel Machek
• [PATCH RFC 1/2] PM / Hibernate: use name_to_dev_t to parse resume   Pavel Machek
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pavel Machek
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pavel Machek
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pavel Machek
• 3.12-rc1: no longer compiles for Nokia n900 (omap based)   Pavel Machek
• 3.12-rc1: no longer compiles for Nokia n900 (omap based), display no longer works   Pavel Machek
• 3.12-rc1: no longer compiles for Nokia n900 (omap based)   Pavel Machek
• [PATCH v3 RFT 1/2] init/do_mounts.c: ignore final \n in name_to_dev_t   Pavel Machek
• [PATCH v3 RFT 2/2] PM / Hibernate: use name_to_dev_t to parse resume   Pavel Machek
• [PATCH v2 0/9] wilink: add device tree support   Pavel Machek
• [PATCH v2 0/9] wilink: add device tree support   Pavel Machek
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Pavel Machek
• [PATCH v2 2/2] RX-51: ARM errata 430973 workaround   Pavel Machek
• [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD   Pavel Machek
• 3.12-rc1: no longer compiles for Nokia n900 (omap based), display no longer works   Pavel Machek
• new binutils needed for arm in 3.12-rc1   Pavel Machek
• new binutils needed for arm in 3.12-rc1   Pavel Machek
• [PATCH v5 4/5] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [PATCH v5 4/5] dma: mmp_pdma: add support for residue reporting   Daniel Mack
• [RFC PATCH 01/15] phy: rename struct omap_control_usb to struct omap_control_phy   Daniel Mack
• [PATCH RESEND] ARM: pxa: ssp: remove kfree for memory allocated with devm_kzalloc   Daniel Mack
• [PATCH] ARM: ep93xx: Don't use modem interface on the second UART   Ryan Mallon
• [GIT PULL] ep93xx-devel for 3.12   Ryan Mallon
• [GIT PULL] ep93xx-fixes for 3.12   Ryan Mallon
• [GIT PULL] ep93xx-devel for 3.12   Ryan Mallon
• [PATCH v2] arm64: add support for kernel mode NEON   Catalin Marinas
• [RFC PATCH 04/14] arm64: kernel: suspend/resume registers save/restore   Catalin Marinas
• [PATCH 1/1] arm64: Align an assembler string properly   Catalin Marinas
• [PATCH 1/1] arm64: Align an assembler string properly   Catalin Marinas
• [PATCH v5 03/13] arm64: define DMA_ERROR_CODE   Catalin Marinas
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Catalin Marinas
• [PATCH v5 05/13] xen/arm,arm64: move Xen initialization earlier   Catalin Marinas
• [PATCH v5 05/13] xen/arm,arm64: move Xen initialization earlier   Catalin Marinas
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Catalin Marinas
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Catalin Marinas
• [PATCH v2 2/2] arm: add early_ioremap support   Catalin Marinas
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Catalin Marinas
• [GIT PULL] arm64 patches for 3.12   Catalin Marinas
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Catalin Marinas
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Catalin Marinas
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Catalin Marinas
• [PATCH 1/5] ARM64: Split out CONFIG_ARM64_AARCH32 from CONFIG_COMPAT. Signed-off-by: Andrew Pinski <apinski at cavium.com>   Catalin Marinas
• [PATCH 2/5] ARM64: Move some signal code to a seperate file to be reused by ILP32.   Catalin Marinas
• [PATCH 3/5] FS: Export poll_select_copy_remaining and rename poll_select_copy_remaining in compat.c so it does not pick the wrong copy.   Catalin Marinas
• ARMv8-A Architecture Reference Manual available   Catalin Marinas
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Catalin Marinas
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Catalin Marinas
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Catalin Marinas
• [PATCH 3/5] FS: Export poll_select_copy_remaining and rename poll_select_copy_remaining in compat.c so it does not pick the wrong copy.   Catalin Marinas
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Catalin Marinas
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Catalin Marinas
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Catalin Marinas
• [PATCH 12/28] arm64: use early_init_dt_scan   Catalin Marinas
• [PATCH 18/28] of: create default early_init_dt_add_memory_arch   Catalin Marinas
• [PATCH 20/28] arm64: set initrd_start/initrd_end for fdt scan   Catalin Marinas
• [PATCH 26/28] arm64: use common of_flat_dt_get_machine_name   Catalin Marinas
• [PATCH 18/28] of: create default early_init_dt_add_memory_arch   Catalin Marinas
• [GIT PULL] arm64 fixes for 3.12   Catalin Marinas
• [Question] Verification For arm64: suspend/resume implementation   Catalin Marinas
• [PATCH] arm64: avoid multiple evaluation of ptr in get_user/put_user()   Catalin Marinas
• [PATCH] arm64: avoid multiple evaluation of ptr in get_user/put_user()   Catalin Marinas
• [PATCH] arm64: avoid multiple evaluation of ptr in get_user/put_user()   Catalin Marinas
• [PATCH] ARM: l2x0: protect outer_cache_fns.sync pointer assignment with OUTER_CACHE_SYNC   Catalin Marinas
• [Question] Verification For arm64: suspend/resume implementation   Catalin Marinas
• [RFT PATCH v1 0/7] enable FPSIMD lazy save and restore for arm64   Catalin Marinas
• [RFT PATCH v1 1/7] arm64: fix possible invalid FPSIMD initialization state   Catalin Marinas
• [RFT PATCH v1 2/7] arm64: restore FPSIMD to default state for kernel and signal contexts   Catalin Marinas
• [RFT PATCH v1 0/7] enable FPSIMD lazy save and restore for arm64   Catalin Marinas
• [PATCH] ARM: l2x0: protect outer_cache_fns.sync pointer assignment with OUTER_CACHE_SYNC   Catalin Marinas
• [PATCH v6 02/19] arm64: define DMA_ERROR_CODE   Catalin Marinas
• [PATCH v6 09/19] arm64/xen: get_dma_ops: return xen_dma_ops if we are running on Xen   Catalin Marinas
• [PATCH 1/1] arm64: Align an assembler string properly   Dave Martin
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Dave Martin
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Dave Martin
• [PATCH] arm: vexpress: tc2: fix CPU hotplug and CPU idle race on cluster power down   Dave Martin
• new binutils needed for arm in 3.12-rc1   Dave Martin
• [RFC PATCH 0/3] MCPM/TC2 support for CPU powerdown synchronisation   Dave Martin
• [RFC PATCH 1/3] ARM: mcpm: Factor out logical-to-physical CPU translation   Dave Martin
• [RFC PATCH 2/3] ARM: mcpm: Implement cpu_kill() to synchronise on powerdown   Dave Martin
• [RFC PATCH 3/3] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave Martin
• [PATCH v2] arm: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down   Dave Martin
• [RFC PATCH 2/3] ARM: mcpm: Implement cpu_kill() to synchronise on powerdown   Dave Martin
• [RFC PATCH 3/3] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave Martin
• [PATCH 0/3] MCPM/TC2 support for CPU powerdown synchronisation   Dave Martin
• [PATCH 1/3] ARM: mcpm: Factor out logical-to-physical CPU translation   Dave Martin
• [PATCH 2/3] ARM: mcpm: Implement cpu_kill() to synchronise on powerdown   Dave Martin
• [PATCH 3/3] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Dave Martin
• [PATCH] ARM: fix Thumb-2 bug in AES assembler code   Dave P Martin
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Peter Maydell
• [RFC PATCH] arm64: KVM: honor cacheability attributes on S2 page fault   Peter Maydell
• arm mach-virt kernel doesn't initialize clocks from device tree (was Re: [PATCH v7 0/3] hw/arm: Add 'virt' platform)   Peter Maydell
• [PATCH v7 2/3] ARM: bcm281xx: Enable GPIO driver   Markus Mayer
• [PATCH v8 0/3] gpio: bcm281xx: GPIO driver   Markus Mayer
• [PATCH v8 1/3] gpio: bcm281xx: Add GPIO driver   Markus Mayer
• [PATCH v8 2/3] ARM: bcm281xx: Enable GPIO driver   Markus Mayer
• [PATCH v8 3/3] ARM: bcm281xx: Add device node for the GPIO controller   Markus Mayer
• [PATCH v7 1/3] gpio: bcm281xx: Add GPIO driver   Markus Mayer
• [PATCH v9 0/3] gpio: bcm281xx: GPIO driver   Markus Mayer
• [PATCH v9 1/3] gpio: bcm281xx: Add GPIO driver   Markus Mayer
• [PATCH v9 2/3] ARM: bcm281xx: Enable GPIO driver   Markus Mayer
• [PATCH v9 3/3] ARM: bcm281xx: Add device node for the GPIO controller   Markus Mayer
• [PATCH] ARM: dts: bcm281xx: Add change disk GPIO   Markus Mayer
• [PATCH v2] ARM: dts: bcm281xx: Add card detect GPIO   Markus Mayer
• Query about include/linux/mailbox.h   Craig McGeachie
• Query about include/linux/mailbox.h   Craig McGeachie
• [RFC PATCH 0/3] Enable BCM2835 mailbox support   Craig McGeachie
• [RFC PATCH 1/3] Enable BCM2835 mailbox support   Craig McGeachie
• [RFC PATCH 2/3] Enable BCM2835 mailbox support   Craig McGeachie
• [RFC PATCH 3/3] Enable BCM2835 mailbox support   Craig McGeachie
• [RFC PATCH 1/3] Enable BCM2835 mailbox support   Craig McGeachie
• [PATCH] irq: bcm2835: Re-implement the hardware IRQ handler.   Craig McGeachie
• [PATCH] irq: bcm2835: Re-implement the hardware IRQ handler.   Craig McGeachie
• [PATCH] irq: bcm2835: Re-implement the hardware IRQ handler.   Craig McGeachie
• [PATCH v3] irq: bmc2835: Re-implement the hardware IRQ handler.   Craig McGeachie
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Arnaldo Carvalho de Melo
• [PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes   Nishanth Menon
• [PATCH 1/4] arm: bone: dts: add CD for mmc1   Nishanth Menon
• [PATCH 2/4] am335x-boneblack: add eMMC DT entry   Nishanth Menon
• [PATCH 3/4] ARM: am335x-bone-common: switch mmc1 to 4-bit mode   Nishanth Menon
• [PATCH 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers   Nishanth Menon
• [PATCH v4 0/2] ARM: dts: Beaglebone MMC fixes   Nishanth Menon
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Nishanth Menon
• [PATCH RFC v3 08/12] ARM: OMAP2+: CM: AM43x clockdomain data   Nishanth Menon
• [PATCH RFC v3 08/12] ARM: OMAP2+: CM: AM43x clockdomain data   Nishanth Menon
• [PATCH] ARM: dts: DRA7: provide arch-timer frequenecy parameter   Nishanth Menon
• [PATCH V2] ARM: dts: DRA7: provide arch-timer frequenecy parameter   Nishanth Menon
• [PATCH] ARM: DRA7: realtime_counter: Add ratio registers for 20MHZ sys-clk frequency\   Nishanth Menon
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Nishanth Menon
• [PATCH V2] ARM: dts: DRA7: provide arch-timer frequenecy parameter   Nishanth Menon
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Nishanth Menon
• [PATCH] ARM: OMAP5: id: Remove ES1.0 support   Nishanth Menon
• [PATCH 0/2] ARM: dts: dra7-evm: add support for sd, eMMC   Nishanth Menon
• [PATCH] ARM: dts: am335x-boneblack: move fixed regulator to board level   Nishanth Menon
• [PATCH] ARM: dts: omap5-uevm: mark TWL6037 as system-power-controller   Nishanth Menon
• [PATCH 0/3] PM / OPP: rename to dev_pm_opp * equivalents   Nishanth Menon
• [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*   Nishanth Menon
• [PATCH 2/3] PM / OPP: rename data structures to dev_pm equivalents   Nishanth Menon
• [PATCH 3/3] PM / OPP: rename header to linux/pm_opp.h   Nishanth Menon
• [PATCH 0/3] PM / OPP: rename to dev_pm_opp * equivalents   Nishanth Menon
• [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*   Nishanth Menon
• [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor   Nishanth Menon
• [PATCH 1/3] PM / OPP: rename functions to dev_pm_opp*   Nishanth Menon
• [RFC PATCH] ARM: OMAP3630: Add generic machine descriptor   Nishanth Menon
• [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd   Nishanth Menon
• [PATCH 1/1] ARM: dts: am335x-bone-common: correct mux mode for mmc1_cmd   Nishanth Menon
• [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT   Nishanth Menon
• [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT   Nishanth Menon
• [PATCHv7 30/36] ARM: dts: omap3 clock data   Nishanth Menon
• [PATCHv7 30/36] ARM: dts: omap3 clock data   Nishanth Menon
• [PATCHv4 11/18] arm: dts: add omap4430 thermal data   Nishanth Menon
• [PATCHv4 11/18] arm: dts: add omap4430 thermal data   Nishanth Menon
• [PATCH V2] ARM: dts: am335x-boneblack: move fixed regulator to board level   Nishanth Menon
• [PATCH 2/2] drivers:net: delete premature free_irq   David Miller
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   David Miller
• [PATCH] net: stmmac: fix bad merge conflict resolution   David Miller
• [PATCH 4/6] ide: drop dependency on ARCH_SHARK   David Miller
• [PATCH 054/228] cpufreq: sparc: call cpufreq_frequency_table_put_attr()   David Miller
• [PATCH 042/228] cpufreq: sparc: use cpufreq_table_validate_and_show()   David Miller
• [PATCH 012/228] cpufreq: sparc: call cpufreq_frequency_table_get_attr()   David Miller
• [PATCH] phy/micrel: Add suspend/resume support to Micrel PHYs   David Miller
• [PATCH] phy/micrel: Add suspend/resume support to Micrel PHYs   David Miller
• [net-next PATCH 0/4] cpsw: support for control module register   David Miller
• [PATCH 00/51] DMA mask changes   Rafał Miłecki
• [PATCH RFC 0/6] ARM: OMAP2+: AM43x/AM335x prcm reset driver   Afzal Mohammed
• [PATCH RFC 1/6] reset: is_reset and clear_reset api's   Afzal Mohammed
• [PATCH RFC 2/6] doc: dt: binding: omap: am43x/am335x prcm reset   Afzal Mohammed
• [PATCH RFC 3/6] reset: am43x/am335x support   Afzal Mohammed
• [PATCH RFC 4/6] ARM: OMAP2+: AM43x/AM335x: have reset controller   Afzal Mohammed
• [PATCH RFC 5/6] ARM: dts: AM335x: prcm node (for reset)   Afzal Mohammed
• [PATCH RFC 6/6] ARM: dts: AM4372: prcm node (for reset)   Afzal Mohammed
• [PATCH] ARM: OMAP2+: wakeupgen: AM43x adaptation   Afzal Mohammed
• [PATCH RFC 0/6] ARM: OMAP2+: AM43x/AM335x prcm reset driver   Afzal Mohammed
• [PATCH RFC 0/6] ARM: OMAP2+: AM43x/AM335x prcm reset driver   Afzal Mohammed
• [PATCH RFC v3 00/12] ARM: OMAP2+: AM43x PRCM basic support   Afzal Mohammed
• [PATCH RFC v3 01/12] ARM: OMAP2+: CM: cm_inst offset s16->u16   Afzal Mohammed
• [PATCH RFC v3 02/12] ARM: OMAP2+: hwmod: AM335x/AM43x: move common ocpif   Afzal Mohammed
• [PATCH RFC v3 03/12] ARM: OMAP2+: hwmod: AM335x/AM43x: move common hwmod   Afzal Mohammed
• [PATCH RFC v3 04/12] ARM: OMAP2+: hwmod: AM335x: runtime register update   Afzal Mohammed
• [PATCH RFC v3 05/12] ARM: OMAP2+: hwmod: AM335x: remove static register offs   Afzal Mohammed
• [PATCH RFC v3 06/12] ARM: OMAP2+: PRCM: AM43x definitions   Afzal Mohammed
• [PATCH RFC v3 07/12] ARM: OMAP2+: PM: AM43x powerdomain data   Afzal Mohammed
• [PATCH RFC v3 08/12] ARM: OMAP2+: CM: AM43x clockdomain data   Afzal Mohammed
• [PATCH RFC v3 09/12] ARM: OMAP2+: hwmod: AM43x support   Afzal Mohammed
• [PATCH RFC v3 10/12] ARM: OMAP2+: hwmod: AM43x operations   Afzal Mohammed
• [PATCH RFC v3 11/12] ARM: OMAP2+: AM43x: PRCM kbuild   Afzal Mohammed
• [PATCH RFC v3 12/12] ARM: OMAP2+: AM43x PRCM init   Afzal Mohammed
• [PATCH RFC v3 08/12] ARM: OMAP2+: CM: AM43x clockdomain data   Afzal Mohammed
• [PATCH v4 00/11] ARM: OMAP2+: AM43x PRCM basic support   Afzal Mohammed
• [PATCH v4 01/11] ARM: OMAP2+: CM: cm_inst offset s16->u16   Afzal Mohammed
• [PATCH v4 03/11] ARM: OMAP2+: hwmod: AM335x: runtime register update   Afzal Mohammed
• [PATCH v4 04/11] ARM: OMAP2+: hwmod: AM335x: remove static register offs   Afzal Mohammed
• [PATCH v4 05/11] ARM: OMAP2+: PRCM: AM43x definitions   Afzal Mohammed
• [PATCH v4 06/11] ARM: OMAP2+: PM: AM43x powerdomain data   Afzal Mohammed
• [PATCH v4 07/11] ARM: OMAP2+: CM: AM43x clockdomain data   Afzal Mohammed
• [PATCH v4 08/11] ARM: OMAP2+: hwmod: AM43x support   Afzal Mohammed
• [PATCH v4 09/11] ARM: OMAP2+: hwmod: AM43x operations   Afzal Mohammed
• [PATCH v4 10/11] ARM: OMAP2+: AM43x: PRCM kbuild   Afzal Mohammed
• [PATCH v4 11/11] ARM: OMAP2+: AM43x PRCM init   Afzal Mohammed
• [PATCH v4 00/11] ARM: OMAP2+: AM43x PRCM basic support   Afzal Mohammed
• [PATCH v4 01/11] ARM: OMAP2+: CM: cm_inst offset s16->u16   Afzal Mohammed
• [PATCH v4 07/11] ARM: OMAP2+: CM: AM43x clockdomain data   Afzal Mohammed
• [PATCH v4 07/11] ARM: OMAP2+: CM: AM43x clockdomain data   Afzal Mohammed
• [PATCH v4 06/11] ARM: OMAP2+: PM: AM43x powerdomain data   Afzal Mohammed
• [PATCH 1/1] arm64: Align an assembler string properly   Radha Mohan
• [PATCH 1/1] arm64: Align an assembler string properly   Radha Mohan
• [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT   Jean-Francois Moine
• [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT   Jean-Francois Moine
• [PATCH 08/14] ASoC: kirkwood: prefer external clock over internal clock   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver   Jean-Francois Moine
• [PATCH] ASoC: generic: Add generic DT based simple codec   Jean-Francois Moine
• [PATCH] ASoc: kirkwood: Extend the min and max number of bytes per period   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: fix loss of external clock at probe time   Jean-Francois Moine
• [PATCH] ASoC: generic: Add generic DT based simple codec   Jean-Francois Moine
• [PATCH v2 0/2] ASoC: kirkwood: fix loss of external clock at probe time   Jean-Francois Moine
• [PATCH v2 1/2] ASoC: kirkwood: clk: probe defer when clock not yet ready   Jean-Francois Moine
• [PATCH v2 2/2] ASoC: kirkwood: fix loss of external clock at probe time   Jean-Francois Moine
• [PATCH v2 1/2] ASoC: kirkwood: clk: probe defer when clock not yet ready   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: add S/PDIF support   Jean-Francois Moine
• [PATCH v3 1/2] ASoC: kirkwood: clk: probe defer when clock not yet ready   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: add S/PDIF support   Jean-Francois Moine
• [PATCH] ASoC: kirkwood: simplify clock handling   Jean-Francois Moine
• [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT   Jean-Francois Moine
• [PATCH 2/2] ARM: Dove: Add the audio device to the Cubox DT   Jean-Francois Moine
• [PATCH 1/1] ARM: vexpress_defconfig update   Pawel Moll
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Pawel Moll
• [PATCH 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH 2/2] ARM: vexpress: Add CLCD Device Tree properties   Pawel Moll
• [PATCH 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v2 2/2] ARM: vexpress: Add CLCD Device Tree properties   Pawel Moll
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• Vexpress config   Pawel Moll
• Vexpress config   Pawel Moll
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v3 2/2] ARM: vexpress: Add CLCD Device Tree properties   Pawel Moll
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH 25/26] ARM: vexpress: remove custom .init_time hook   Pawel Moll
• Vexpress config   Pawel Moll
• [PATCH v4 1/2] video: ARM CLCD: Add DT support   Pawel Moll
• [PATCH v4 2/2] ARM: vexpress: Add CLCD Device Tree properties   Pawel Moll
• Vexpress config   Pawel Moll
• [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP   Pawel Moll
• [PATCH] perf tools: Check libunwind for availability of dwarf parsing feature   Ingo Molnar
• mm: insure topdown mmap chooses addresses above security minimum   Ingo Molnar
• mm: insure topdown mmap chooses addresses above security minimum   Ingo Molnar
• [GIT PULL 3.12-rc2 fixes] clocksource: Several fixes for 3.12-rc2   Ingo Molnar
• [GIT PULL 3.12-rc2 fixes] clocksource: Several fixes for 3.12-rc2   Ingo Molnar
• [PATCH v2 0/4] Add Ether DT support for R8A7778/BOCK-W reference board   Kuninori Morimoto
• [PATCH] ARM: shmobile: Add r8a7790 thermal sensor DT device   Kuninori Morimoto
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Preeti U Murthy
• [PATCH 1/2] tick: broadcast: Deny per-cpu clockevents from being broadcast sources   Preeti U Murthy
• [PATCH] arm: bpf_jit: support MOD operation   Vladimir Murzin
• [PATCH 211/228] cpufreq: tegra: remove calls to cpufreq_notify_transition()   Vladimir Murzin
• [PATCH v2] arm: bpf_jit: support MOD operation   Vladimir Murzin
• [net-next PATCH 0/4] cpsw: support for control module register   Mugunthan V N
• [net-next PATCH 1/4] net: ethernet: cpsw: switch to devres allocations   Mugunthan V N
• [net-next PATCH 2/4] drivers: net: cpsw-phy-sel: Add new driver for phy mode selection for cpsw   Mugunthan V N
• [net-next PATCH 3/4] drivers: net: cpsw: use cpsw-phy-sel driver to configure phy mode   Mugunthan V N
• [net-next PATCH 4/4] ARM: dts: am33xx: adopt to cpsw-phy-sel driver to configure phy mode   Mugunthan V N
• [GIT PULL] KVM/ARM Updates for 3.12   Gleb Natapov
• [PATCH 2/3] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Gleb Natapov
• [PATCH 2/3] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Gleb Natapov
• [PATCH 3/3] aarch64: kvm: introduce CONFIG_KVM_MAX_VCPUS   Gleb Natapov
• [RFC Patch v2 1/3] clk: add support for temporary parent clock migration   Sylwester Nawrocki
• [PATCH v6 5/5] clk: Implement clk_unregister   Sylwester Nawrocki
• [PATCH v3 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Sylwester Nawrocki
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Sylwester Nawrocki
• [PATCH 1/2] video: ARM CLCD: Add DT support   Sylwester Nawrocki
• [PATCH 1/2] video: ARM CLCD: Add DT support   Sylwester Nawrocki
• [PATCH 1/2] video: ARM CLCD: Add DT support   Sylwester Nawrocki
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Sylwester Nawrocki
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Sylwester Nawrocki
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Sylwester Nawrocki
• [PATCH v2 00/12] clk/exynos convert clock IDs to macros   Sylwester Nawrocki
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Sylwester Nawrocki
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Sylwester Nawrocki
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Sylwester Nawrocki
• [PATCH v5 4/4] media: s5p-tv: Fix mixer driver to work with CCF   Sylwester Nawrocki
• [PATCH 1/6] clk: exynos-audss: convert to platform device   Sylwester Nawrocki
• [PATCH V2 1/6] clk: exynos-audss: convert to platform device   Sylwester Nawrocki
• [PATCH V2 1/6] clk: exynos-audss: convert to platform device   Sylwester Nawrocki
• [PATCH v5 1/3] clk: samsung: Add clock driver for s5pc110/s5pv210   Sylwester Nawrocki
• [PATCH V3 1/6] clk: exynos-audss: convert to platform device   Sylwester Nawrocki
• [PATCH v6 0/5] clk: clock deregistration support   Sylwester Nawrocki
• ARM/Samsung/S3C24xx: Linux-3.11 crashes when using PWM   Sylwester Nawrocki
• [PATCH v6 0/5] clk: clock deregistration support   Sylwester Nawrocki
• [PATCH V5 0/5] Generic PHY driver for the Exynos SoC MIPI CSI-2/DSI DPHYs   Sylwester Nawrocki
• [PATCH V5 1/5] ARM: dts: Add MIPI PHY node to exynos4.dtsi   Sylwester Nawrocki
• [PATCH V5 2/5] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs   Sylwester Nawrocki
• [PATCH V5 3/5] [media] exynos4-is: Use the generic MIPI CSIS PHY driver   Sylwester Nawrocki
• [PATCH V5 4/5] video: exynos_mipi_dsim: Use the generic PHY driver   Sylwester Nawrocki
• [PATCH V5 5/5] ARM: Samsung: Remove the MIPI PHY setup code   Sylwester Nawrocki
• [PATCH V5 2/5] phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs   Sylwester Nawrocki
• [PATCH V5 1/5] ARM: dts: Add MIPI PHY node to exynos4.dtsi   Sylwester Nawrocki
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   NeilBrown
• [PATCH 1/2] ARM: dts: mx6: Add mx6solo support   Robert Nelson
• [PATCH 05/10] clk: socfpga: Use NULL instead of 0   Dinh Nguyen
• [PATCH 3/3] arm: dts: socfpga: Add support for SD/MMC   Dinh Nguyen
• [RESEND PATCHv3 1/2] clocksource: dw_apb_timer: Move timer defines to header file.   Dinh Nguyen
• [RESEND PATCHv3 1/2] clocksource: dw_apb_timer: Move timer defines to header file.   Dinh Nguyen
• [PATCHv4 2/2] clocksource: dw_apb_timer_of: Fix read_sched_clock   Dinh Nguyen
• [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP   Dinh Nguyen
• [PATCH 1/3] arm: socfpga: Set the SDMMC clock phase in system manager   Dinh Nguyen
• [PATCH 05/26] ARM: socfgpa: prepare for arch-wide .init_time callback   Dinh Nguyen
• [PATCH 21/26] ARM: socfpga: remove custom .init_time hook   Dinh Nguyen
• [PATCH 1/2] dts: socfpga: Add ethernet support on Altera's SOCFPGA platform   Dinh Nguyen
• [PATCH 017/228] cpufreq: cris: use cpufreq_table_validate_and_show()   Jesper Nilsson
• [PATCH 061/228] cpufreq: cris: Use generic cpufreq routines   Jesper Nilsson
• [PATCH 153/228] cpufreq: cris: Convert to light weight ->target_index() routine   Jesper Nilsson
• [PATCH 187/228] cpufreq: cris: remove calls to cpufreq_notify_transition()   Jesper Nilsson
• [PATCH 130/228] cpufreq: cris: use cpufreq_generic_init() routine   Jesper Nilsson
• [PATCH 097/228] cpufreq: cris: don't initialize part of policy that is set by core too   Jesper Nilsson
• [linux-sunxi] Re: [PATCH 4/4] Add arch count timer node in dts for Allwinner A20(sunxi 7i).   Henrik Nordström
• [GIT PULL] DaVinci GPIO driver updates for v3.12   Sekhar Nori
• [PATCH v4 3/6] ARM: edma: Add function to manually trigger an EDMA channel   Sekhar Nori
• [PATCH v2 2/3] ARM: OMAP4+: Move SRAM data to DT   Sekhar Nori
• [PATCH v2 2/3] ARM: OMAP4+: Move SRAM data to DT   Sekhar Nori
• [GIT PULL 1/2] DaVinci SoC updates for v3.12   Sekhar Nori
• [RFC 0/4] Create infrastructure for running C code from SRAM.   Sekhar Nori
• [GIT PULL 1/2] DaVinci SoC updates for v3.12   Sekhar Nori
• [PATCH] ARM: davinci: fix build breakage with DEBUG_LL   Sekhar Nori
• [PATCH] ARM: davinci: fix build breakage with DEBUG_LL   Sekhar Nori
• [PATCH 2/2] am335x-boneblack: add eMMC DT entry   Sekhar Nori
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Sekhar Nori
• [PATCH] ARM: davinci: remove deprecated IRQF_DISABLED   Sekhar Nori
• [PATCH] arm: mach-davinci: mark __maybe_unused struct   Sekhar Nori
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Sekhar Nori
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Sekhar Nori
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Sekhar Nori
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Sekhar Nori
• [GIT PULL] DaVinci fixes for v3.12-rc   Sekhar Nori
• [GIT PULL v2] DaVinci fixes for v3.12-rc2   Sekhar Nori
• [GIT PULL] DaVinci fixes for v3.12-rc   Sekhar Nori
• [GIT PULL] DaVinci GPIO changes for v3.13   Sekhar Nori
• [GIT PULL] DaVinci SoC updates for v3.13   Sekhar Nori
• [GIT PULL] DaVinci SoC updates for v3.13   Sekhar Nori
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Sekhar Nori
• [PATCH 2/2] ARM: dts: dra7-evm: Add mmc2 node for eMMC support   Sekhar Nori
• [PATCH v3] ARM: EDMA: Fix clearing of unused list for DT DMA resources   Sekhar Nori
• [PATCH] arm: mach-davinci: mark __maybe_unused struct   Brian Norris
• [PATCH] mtd: nand: pxa3xx: Add pxa3xx_nand_get_variant() stub for !CONFIG_OF   Brian Norris
• [PATCH] mtd: nand: pxa3xx: Add pxa3xx_nand_get_variant() stub for !CONFIG_OF   Brian Norris
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Brian Norris
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Brian Norris
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Brian Norris
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Brian Norris
• [PATCH v2] mtd: atmel_nand: use the common function to get ecc info   Brian Norris
• [PATCH v3] mtd: atmel_nand: use minimum ecc requirements of nand: ecc_{strength,step}_ds   Brian Norris
• [PATCH v2 1/2] mtd: atmel_nand: remove #if defined(CONFIG_OF) around OF-specific code   Brian Norris
• [PATCH v3] mtd: atmel_nand: use minimum ecc requirements of nand: ecc_{strength,step}_ds   Brian Norris
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Brian Norris
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Brian Norris
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Brian Norris
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jiri Olsa
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jiri Olsa
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jiri Olsa
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jiri Olsa
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jiri Olsa
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jiri Olsa
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jiri Olsa
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jiri Olsa
• [PATCH 4/4] perf: parse the .debug_frame section in case .eh_frame is not present   Jiri Olsa
• [PATCH][RESEND] ARM: at91: remove IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: footbridge: remove obsolete IRQF_DISABLED   Michael Opdenacker
• [PATCH][RESEND] ARM: imx: remove IRQF_DISABLED   Michael Opdenacker
• [PATCH] ARM: davinci: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH] ARM: OMAP: remove deprecated IRQF_DISABLED   Michael Opdenacker
• [PATCH] ARM: STi: remove unused Kconfig parameters   Michael Opdenacker
• [PATCH] ARM: STi: remove unused Kconfig parameters   Michael Opdenacker
• [GIT PULL] Final pull-request due for the v3.12 merge window   Samuel Ortiz
• [PATCH v2 6/9] mfd: wm8994: convert to use I2C core runtime PM   Samuel Ortiz
• [PATCH v2 6/9] mfd: wm8994: convert to use I2C core runtime PM   Samuel Ortiz
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/4] pinctrl: at91: fix typos   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 2/4] pinctrl: at91: fix sam9x5 debounce/deglitch functions   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 3/4] pinctrl: at91: improve pinconf_set/get function robustness   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] video: mxsfb: Add missing break   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: at91: sam9g45: shutdown ddr1 too when rebooting   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: AT91: Animeo IP: fix mtd partition table   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: AT91: Animeo IP: add ADC support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4 1/2] video: ARM CLCD: Add DT support   Jean-Christophe PLAGNIOL-VILLARD
• mxsfb on i.MX28 uses bypassed ref_xtal 24MHz clock for LCD   Hector Palacios
• [PATCH] clk: mxs: source LCD clock from PLL instead of from ref_xtal   Hector Palacios
• [RFC] ARM: kernel: io: Optimize memcpy_fromio function.   Kumar Singla Pardeep-B45784
• [PATCH v3 0/7] ARM: imx27 pinctrl   Markus Pargmann
• [PATCH v3 1/7] pinctrl: imx1 core driver   Markus Pargmann
• [PATCH v3 2/7] pinctrl: imx27: imx27 pincontrol driver   Markus Pargmann
• [PATCH v3 3/7] ARM: dts: imx27 pin functions   Markus Pargmann
• [PATCH v3 4/7] ARM: dts: imx27 pinctrl   Markus Pargmann
• [PATCH v3 5/7] ARM: dts: imx27 phyCARD-S pinctrl   Markus Pargmann
• [PATCH v3 6/7] ARM: dts: imx27 phycore pinctrl   Markus Pargmann
• [PATCH v3 7/7] ARM: imx27: enable pinctrl   Markus Pargmann
• [alsa-devel] [PATCH 2/3] ASoC: generic simple sound card DT bindings   Markus Pargmann
• dev->of_node overwrite can cause device loading with different driver   Markus Pargmann
• dev->of_node overwrite can cause device loading with different driver   Markus Pargmann
• dev->of_node overwrite can cause device loading with different driver   Markus Pargmann
• dev->of_node overwrite can cause device loading with different driver   Markus Pargmann
• [PATCH 0/3] dma: mxs-dma bugfixes and cleanup   Markus Pargmann
• [PATCH 1/3] dma: mxs-dma: Cleanup interrupt handler   Markus Pargmann
• [PATCH 2/3] dma: mxs-dma: Track number of irqs for callback   Markus Pargmann
• [PATCH 3/3] dma: mxs-dma: Pause channel while prep_dma_cyclic   Markus Pargmann
• [PATCH 2/3] dma: mxs-dma: Track number of irqs for callback   Markus Pargmann
• [PATCH v2 0/3] dma: mxs-dma bugfixes and cleanup   Markus Pargmann
• [PATCH v2 1/3] dma: mxs-dma: Cleanup interrupt handler   Markus Pargmann
• [PATCH v2 2/3] dma: mxs-dma: Pause channel while prep_dma_cyclic   Markus Pargmann
• [PATCH v2 3/3] dma: mxs-dma: Report correct residue for cyclic DMA   Markus Pargmann
• [PATCH v2 1/3] dma: mxs-dma: Cleanup interrupt handler   Markus Pargmann
• [PATCH 1/3] dmaengine: pl330: Set residue in tx_status callback.   Chanho Park
• [PATCHv2] dma: pl330: add pl330_prep_dma_sg to transfer from sglist to sglist   Chanho Park
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [RFC PATCH 1/3] ARM: KVM: Implement target CPU=Host   Anup Patel
• [RFC PATCH 2/3] ARM64: KVM: Implement target CPU=Host   Anup Patel
• [RFC PATCH 3/3] KVM: ARM: Update documentation for KVM_ARM_VCPU_INIT ioctl   Anup Patel
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [RFC PATCH 3/3] KVM: ARM: Update documentation for KVM_ARM_VCPU_INIT ioctl   Anup Patel
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [RFC PATCH] arm64: KVM: honor cacheability attributes on S2 page fault   Anup Patel
• [PATCH 0/2] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [PATCH 1/2] ARM/ARM64: KVM: Implement KVM_ARM_SUITABLE_TARGET ioctl   Anup Patel
• [PATCH 2/2] KVM: Add documentation for KVM_ARM_SUITABLE_TARGET ioctl   Anup Patel
• [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8   Anup Patel
• [PATCH] KVM: ARM: Fix typo in comments of inject_abt()   Anup Patel
• [PATCH 2/2] KVM: Add documentation for KVM_ARM_SUITABLE_TARGET ioctl   Anup Patel
• [PATCH] arm64: KVM: Add Kconfig option for max VCPUs per-Guest   Anup Patel
• [PATCH v2 0/4] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [PATCH v2 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v2 2/4] ARM64: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v2 3/4] ARM/ARM64: KVM: Implement KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v2 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v2 0/4] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [PATCH v3 0/4] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [PATCH v3 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v3 2/4] ARM64: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v3 3/4] ARM/ARM64: KVM: Implement KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v3 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v3 2/4] ARM64: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v3 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v3 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v4 0/4] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [PATCH v4 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v4 2/4] ARM64: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v4 3/4] ARM/ARM64: KVM: Implement KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v4 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v4 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v4 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v5 0/4] Target CPU=Host implementation for KVM ARM/ARM64   Anup Patel
• [PATCH v5 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v5 2/4] ARM64: KVM: Implement kvm_vcpu_preferred_target() function   Anup Patel
• [PATCH v5 3/4] ARM/ARM64: KVM: Implement KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v5 4/4] KVM: Add documentation for KVM_ARM_PREFERRED_TARGET ioctl   Anup Patel
• [PATCH v6 07/12] ARM: EXYNOS: remove system mmu initialization from exynos tree   Sean Paul
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Veli-Pekka Peltola
• [PATCH] OMAP/serial: Fix division by zero exception on 3M+ baud rates   Alexey Pelykh
• [PATCH] OMAP/serial: Fix misnamed variable   Alexey Pelykh
• [PATCH] OMAP/serial: Fix Mode13 vs Mode16 priority   Alexey Pelykh
• [PATCH] OMAP/serial: Fix division by zero exception on 3M+ baud rates   Alexey Pelykh
• mm: insure topdown mmap chooses addresses above security minimum   Timothy Pepper
• mm: insure topdown mmap chooses addresses above security minimum   Timothy Pepper
• mm: insure topdown mmap chooses addresses above security minimum   Timothy Pepper
• [PATCH] dma: use %pa to print dma_addr_t   Joe Perches
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Joe Perches
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Joe Perches
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Joe Perches
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Joe Perches
• [PATCH] ARM: cns3xxx: whitespace cleanup   Luka Perkov
• [PATCH] IXP4xx: Add Gateworks Cambria support.   Luka Perkov
• [PULL REQUEST] big-endian updates for ARM   Thomas Petazzoni
• [PULL REQUEST] big-endian updates for ARM   Thomas Petazzoni
• [PULL REQUEST] big-endian updates for ARM   Thomas Petazzoni
• [PULL REQUEST] big-endian updates for ARM   Thomas Petazzoni
• [PULL REQUEST] big-endian updates for ARM   Thomas Petazzoni
• Unhandled prefetch abort on mirabox with 3.11-rc7   Thomas Petazzoni
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Thomas Petazzoni
• [PATCH] net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls   Thomas Petazzoni
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Thomas Petazzoni
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Thomas Petazzoni
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Thomas Petazzoni
• [PATCH] ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver   Thomas Petazzoni
• [PATCH] ASoC: kirkwood: change the compatible string of the kirkwood-i2s driver   Thomas Petazzoni
• [RFC PATCHv2 0/4] Add DT support for fixed PHYs   Thomas Petazzoni
• [RFC PATCHv2 1/4] net: phy: decouple PHY id and PHY address in fixed PHY driver   Thomas Petazzoni
• [RFC PATCHv2 2/4] net: phy: extend fixed driver with fixed_phy_register()   Thomas Petazzoni
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Thomas Petazzoni
• [RFC PATCHv2 4/4] net: mvneta: add support for fixed links   Thomas Petazzoni
• [RFC PATCHv2 0/4] Add DT support for fixed PHYs   Thomas Petazzoni
• mvneta: oops in __rcu_read_lock on mirabox   Thomas Petazzoni
• mvneta: oops in __rcu_read_lock on mirabox   Thomas Petazzoni
• mvneta: oops in __rcu_read_lock on mirabox   Thomas Petazzoni
• [PATCH] arm: Kirkwood - Remove kirkwood_setup_wins and rely on the DT binding   Thomas Petazzoni
• [PATCH] arm: Kirkwood - Remove kirkwood_setup_wins and rely on the DT binding   Thomas Petazzoni
• [PATCH] bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties   Thomas Petazzoni
• [PATCH] bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties   Thomas Petazzoni
• [RFC PATCHv2 3/4] of: provide a binding for fixed link PHYs   Thomas Petazzoni
• mvneta: oops in __rcu_read_lock on mirabox   Thomas Petazzoni
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Thomas Petazzoni
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Thomas Petazzoni
• [PATCH 0/5] Add Core Divider clock support for Armada 370/XP   Thomas Petazzoni
• [PATCH 0/5] Add Core Divider clock support for Armada 370/XP   Thomas Petazzoni
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Thomas Petazzoni
• Inte IOP Xscale updates   Mikael Pettersson
• Inte IOP Xscale updates   Mikael Pettersson
• [PATCH 0/8] IOP GPIO refactoring   Mikael Pettersson
• [PATCH] i2c: s3c2410: fix clk_disable/clk_unprepare warnings   Kim Phillips
• [PATCH linux-stable-3.10.y] ARM: KVM: Fix 64-bit coprocessor handling   Kim Phillips
• [RFC PATCH 04/14] arm64: kernel: suspend/resume registers save/restore   Lorenzo Pieralisi
• [RFC PATCH 05/14] arm64: kernel: cpu_{suspend/resume} implementation   Lorenzo Pieralisi
• [RFC PATCH 12/14] arm64: kernel: add cpu_{suspend}/{resume} build infrastructure   Lorenzo Pieralisi
• [RFC PATCH 04/14] arm64: kernel: suspend/resume registers save/restore   Lorenzo Pieralisi
• linux-next: manual merge of the arm-soc tree with the pm tree   Lorenzo Pieralisi
• linux-next: manual merge of the arm-soc tree with the pm tree   Lorenzo Pieralisi
• [PATCH] drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries   Lorenzo Pieralisi
• [PATCH] drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries   Lorenzo Pieralisi
• [Question] Verification For arm64: suspend/resume implementation   Lorenzo Pieralisi
• [PATCH v2] drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries   Lorenzo Pieralisi
• [PATCH v2 11/12] cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC   Lorenzo Pieralisi
• [PATCH 2/2] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [PATCH 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [PATCH] drivers: cpuidle: rename ARM big.LITTLE driver config and makefile entries   Lorenzo Pieralisi
• [PATCH 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [PATCH 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [PATCH 2/2] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [PATCH v2 0/2] ARM DT cpus/cpu and topology bindings   Lorenzo Pieralisi
• [PATCH v2 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [PATCH v2 2/2] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [PATCH] ARM: MCPM: don't explode if invoked without being initialized first   Lorenzo Pieralisi
• [PATCH v2 0/2] ARM DT cpus/cpu and topology bindings   Lorenzo Pieralisi
• [PATCH] ARM: MCPM: don't explode if invoked without being initialized first   Lorenzo Pieralisi
• [PATCH v3 0/2] ARM DT cpus/cpu and topology bindings   Lorenzo Pieralisi
• [PATCH v3 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Lorenzo Pieralisi
• [PATCH v3 2/2] Documentation: DT: arm: define CPU topology bindings   Lorenzo Pieralisi
• [PATCH v2 0/2] ARM DT cpus/cpu and topology bindings   Lorenzo Pieralisi
• [PATCH] arm: vexpress: tc2: fix CPU hotplug and CPU idle race on cluster power down   Lorenzo Pieralisi
• [PATCH v2 0/2] ARM DT cpus/cpu and topology bindings   Lorenzo Pieralisi
• [PATCH] arm: vexpress: tc2: fix CPU hotplug and CPU idle race on cluster power down   Lorenzo Pieralisi
• [PATCH v2] arm: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down   Lorenzo Pieralisi
• [PATCH 0/3] perf: parse the dwarf backtrace info from .debug_frame section   Jean Pihet
• [PATCH 1/3] ARM: perf: add support for perf regs API   Jean Pihet
• [PATCH 2/3] ARM: perf: wire up perf_regs and unwind support for ARM   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 0/3] perf: parse the dwarf backtrace info from .debug_frame section   Jean Pihet
• [PATCH 1/3] ARM: perf: add support for perf registers API   Jean Pihet
• [PATCH 2/3] ARM: perf: wire up perf_regs and unwind support for ARM   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 0/3] perf: parse the dwarf backtrace info from .debug_frame section   Jean Pihet
• [PATCH 3/3] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 0/3] perf: parse the dwarf backtrace info from .debug_frame section   Jean Pihet
• [PATCH] perf tools: Check libunwind for availability of dwarf parsing feature   Jean Pihet
• [PATCH] perf tools: Check libunwind for availability of dwarf parsing feature   Jean Pihet
• [PATCH v2 0/4] perf: parse the dwarf backtrace info from .debug_frame section   Jean Pihet
• [PATCH 1/4] ARM: perf: add support for perf registers API   Jean Pihet
• [PATCH 2/4] ARM: perf: wire up perf_regs and unwind support for ARM   Jean Pihet
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jean Pihet
• [PATCH 4/4] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 2/4] nohz_full: Kconfig: drop requrement on 64-bit   Jean Pihet
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Jean Pihet
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Jean Pihet
• [PATCH] arm: mvebu: use the main timer as clock source from DT   Jean Pihet
• [Query] Stack Overflow in "arch/arm/kernel/unwind.c" while unwinding frame   Jean Pihet
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jean Pihet
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jean Pihet
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jean Pihet
• [PATCH v3 0/4] perf: parse the dwarf backtrace info from .debug_frame section   Jean Pihet
• [PATCH 1/4] ARM: perf: add support for perf registers API   Jean Pihet
• [PATCH 2/4] ARM: perf: wire up perf_regs and unwind support for ARM   Jean Pihet
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jean Pihet
• [PATCH 4/4] perf: parse the .debug_frame section in case .eh_frame is not present   Jean Pihet
• [PATCH 3/4] perf tools: Check libunwind for availability of dwarf parsing feature   Jean Pihet
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Laurent Pinchart
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Laurent Pinchart
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Laurent Pinchart
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Laurent Pinchart
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Laurent Pinchart
• [PATCH 0/2] ARM: shmobile: Remove #gpio-ranges-cells property   Laurent Pinchart
• [PATCH 1/2] gpio: rcar: Remove #gpio-range-cells DT property usage   Laurent Pinchart
• [PATCH 2/2] ARM: shmobile: Remove #gpio-ranges-cells DT property   Laurent Pinchart
• [PATCH/RESEND 0/2] ARM: shmobile: Remove #gpio-ranges-cells property   Laurent Pinchart
• [PATCH/RESEND 1/2] gpio: rcar: Remove #gpio-range-cells DT property usage   Laurent Pinchart
• [PATCH/RESEND 2/2] ARM: shmobile: Remove #gpio-ranges-cells DT property   Laurent Pinchart
• [PATCH/RESEND 1/2] gpio: rcar: Remove #gpio-range-cells DT property usage   Laurent Pinchart
• [PATCH v6] gpio: pcf857x: Add OF support   Laurent Pinchart
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Laurent Pinchart
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Laurent Pinchart
• [PATCH v6 0/5] clk: clock deregistration support   Laurent Pinchart
• [ARM attend] Any news on agenda? Device tree documentation discussion   Laurent Pinchart
• [PATCH 31/51] DMA-API: media: omap3isp: use dma_coerce_mask_and_coherent()   Laurent Pinchart
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Laurent Pinchart
• [PATCH] ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag   Laurent Pinchart
• [PATCH v2] ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag   Laurent Pinchart
• [PATCH 1/5] ARM64: Split out CONFIG_ARM64_AARCH32 from CONFIG_COMPAT. Signed-off-by: Andrew Pinski <apinski at cavium.com>   Andrew Pinski
• [PATCH 2/5] ARM64: Move some signal code to a seperate file to be reused by ILP32.   Andrew Pinski
• [PATCH 3/5] FS: Export poll_select_copy_remaining and rename poll_select_copy_remaining in compat.c so it does not pick the wrong copy.   Andrew Pinski
• [PATCH 4/5] ARM64: Move copy_siginfo_to_user32 and copy_siginfo_from_user32 to signal.c to be able to use from non AARCH32 code.   Andrew Pinski
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Andrew Pinski
• [PATCH 2/5] ARM64: Move some signal code to a seperate file to be reused by ILP32.   Andrew Pinski
• [PATCH 3/5] FS: Export poll_select_copy_remaining and rename poll_select_copy_remaining in compat.c so it does not pick the wrong copy.   Andrew Pinski
• [PATCH 5/5] ARM64: Add support for ILP32 ABI.   Andrew Pinski
• [PATCH 2/5] arm: LLVMLinux: use current_stack_pointer for percpu   Nicolas Pitre
• Build error in torvalds kernel 3.11 for omap2plus   Nicolas Pitre
• [PATCH] ARM: vexpress: allow dcscb and tc2_pm in a combined ARMv6+v7 build   Nicolas Pitre
• Build error in torvalds kernel 3.11 for omap2plus   Nicolas Pitre
• [PATCH] ARM: fix Thumb-2 bug in AES assembler code   Nicolas Pitre
• [PATCH v3 5/6] ARM: atomics: prefetch the destination word for write prior to strex   Nicolas Pitre
• [PATCH v2] ARM: fix Thumb-2 bug in AES assembler code   Nicolas Pitre
• [PATCH v2] ARM: fix Thumb-2 bug in AES assembler code   Nicolas Pitre
• [PATCH 0/4] ARM: NEON based fast(er) AES in CBC/CTR/XTS modes   Nicolas Pitre
• [RESEND RFC V2] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Nicolas Pitre
• [PATCH] ARM: MCPM: don't explode if invoked without being initialized first   Nicolas Pitre
• [PATCH 00/13] second batch of b.L switcher patches   Nicolas Pitre
• [PATCH 01/13] ARM: bL_switcher: Add synchronous enable/disable interface   Nicolas Pitre
• [PATCH 02/13] ARM: bL_switcher: Add runtime control notifier   Nicolas Pitre
• [PATCH 03/13] ARM: bL_switcher: Add switch completion callback for bL_switch_request()   Nicolas Pitre
• [PATCH 04/13] ARM: bL_switcher: synchronize the outbound with the inbound   Nicolas Pitre
• [PATCH 05/13] ARM: SMP: basic IPI triggered completion support   Nicolas Pitre
• [PATCH 06/13] ARM: mcpm: add a simple poke mechanism to the early entry code   Nicolas Pitre
• [PATCH 07/13] ARM: GIC: function to retrieve the physical address of the SGIR   Nicolas Pitre
• [PATCH 08/13] ARM: GIC: interface to send a SGI directly   Nicolas Pitre
• [PATCH 09/13] ARM: bL_switcher: wait until inbound is alive before performing a switch   Nicolas Pitre
• [PATCH 10/13] ARM: bL_switcher: Basic trace events support   Nicolas Pitre
• [PATCH 11/13] ARM: bL_switcher/trace: Add trace trigger for trace bootstrapping   Nicolas Pitre
• [PATCH 12/13] ARM: bL_switcher/trace: Add kernel trace trigger interface   Nicolas Pitre
• [PATCH 13/13] ARM: bL_switcher: Add query interface to discover CPU affinities   Nicolas Pitre
• [PATCH] ARM: mm: make UACCESS_WITH_MEMCPY huge page aware   Nicolas Pitre
• [PATCH] ARM: MCPM: don't explode if invoked without being initialized first   Nicolas Pitre
• [PATCH] ARM: MCPM: don't explode if invoked without being initialized first   Nicolas Pitre
• new binutils needed for arm in 3.12-rc1   Nicolas Pitre
• new binutils needed for arm in 3.12-rc1   Nicolas Pitre
• [PATCH v2] arm: vexpress: tc2: fix hotplug/idle/kexec race on cluster power down   Nicolas Pitre
• [RFC PATCH 1/3] ARM: mcpm: Factor out logical-to-physical CPU translation   Nicolas Pitre
• [RFC PATCH 2/3] ARM: mcpm: Implement cpu_kill() to synchronise on powerdown   Nicolas Pitre
• [RFC PATCH 3/3] ARM: vexpress/TC2: Implement MCPM power_down_finish()   Nicolas Pitre
• [RFC PATCH 2/3] ARM: mcpm: Implement cpu_kill() to synchronise on powerdown   Nicolas Pitre
• [PATCH 2/3] ARM: mcpm: Implement cpu_kill() to synchronise on powerdown   Nicolas Pitre
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Nicolas Pitre
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Nicolas Pitre
• [PATCH RESEND] ARM: add dtbImage.<dt> and dtbuImage.<dt> rules   Nicolas Pitre
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Sourav Poddar
• [PATCH v7 1/3] gpio: bcm281xx: Add GPIO driver   Matt Porter
• [PATCHv3] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Matt Porter
• [PATCHv3] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Matt Porter
• [PATCHv3] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Matt Porter
• [PATCH] ARM: dts: add initial VF610 Cosmic/Cosmic+ board support   Matt Porter
• [PATCH] ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts   Matt Porter
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Matt Porter
• [PATCH] ARM: dts: add initial VF610 Cosmic/Cosmic+ board support   Matt Porter
• [PATCH v2] ARM: dts: add initial VF610 Cosmic/Cosmic+ board support   Matt Porter
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Matt Porter
• [RFC PATCH 0/2] Aarch64: KGDB: kernel debugging support   Sandeepa Prabhu
• [RFC PATCH 2/2] Aarch64: KGDB: Add Step debugging support   Sandeepa Prabhu
• [RFC PATCH 2/2] Aarch64: KGDB: Add Step debugging support   Sandeepa Prabhu
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Sandeepa Prabhu
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Sandeepa Prabhu
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Sandeepa Prabhu
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Sandeepa Prabhu
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Sandeepa Prabhu
• [PATCH] at91: mmc: fix minimum bus frequency   Jiri Prchal
• [PATCH] at91: mmc: fix missing pinctrl in dt   Jiri Prchal
• [PATCH] at91: serial: fix wrong pinctrl_usart2_rts   Jiri Prchal
• [PATCH] at91: serial: sam9g25: add usart3 to dtsi   Jiri Prchal
• [PATCH] serial: prepare for 9bit data   Jiri Prchal
• [PATCH] at91: mmc: fix missing pinctrl in dt   Jiří Prchal
• [PATCH 07/26] clk: vt8500: parse pmc_base from clock driver   Tony Prisk
• [PATCH 07/26] clk: vt8500: parse pmc_base from clock driver   Tony Prisk
• [PATCH 07/26] clk: vt8500: parse pmc_base from clock driver   Tony Prisk
• [RFC PATCH] imx: video: staging: Add HDMI support to imx-drm driver   Tony Prisk
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Andre Przywara
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Andre Przywara
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Andre Przywara
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Andre Przywara
• [PROPOSAL] ARM/FDT: passing multiple binaries to a kernel   Andre Przywara
• [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY   Roger Quadros
• [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY   Roger Quadros
• [PATCH 3/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework   Roger Quadros
• [PATCH 1/7] usb: dwc3: get "usb_phy" only if the platform indicates the presence of PHY   Roger Quadros
• [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Roger Quadros
• [PATCH 4/7] Documentation: dt bindings: move ..usb/usb-phy.txt to ..phy/omap-phy.txt   Roger Quadros
• [PATCH 6/7] arm/dts: added dt properties to adapt to the new phy framwork   Roger Quadros
• [PATCH 7/7] drivers: phy: renamed struct omap_control_usb to struct omap_control_phy   Roger Quadros
• [PATCH 2/7] usb: dwc3: adapt dwc3 core to use Generic PHY Framework   Roger Quadros
• [PATCH 3/7] drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework   Roger Quadros
• [PATCH v7 00/10] phy: omap-usb: Support multiple instances and new types   Roger Quadros
• [PATCH v7 01/10] usb: phy: omap-control: Get rid of platform data   Roger Quadros
• [PATCH v7 02/10] usb: phy: omap: Add new device types and remove omap_control_usb3_phy_power()   Roger Quadros
• [PATCH v7 03/10] usb: phy: omap-usb2: Don't use omap_get_control_dev()   Roger Quadros
• [PATCH v7 04/10] usb: phy: omap-usb3: Don't use omap_get_control_dev()   Roger Quadros
• [PATCH v7 05/10] usb: musb: omap2430: Don't use omap_get_control_dev()   Roger Quadros
• [PATCH v7 06/10] ARM: dts: omap4: update omap-control-usb nodes   Roger Quadros
• [PATCH v7 07/10] usb: phy: omap: get rid of omap_get_control_dev()   Roger Quadros
• [PATCH v7 08/10] ARM: dts: omap5: update omap-control-usb node   Roger Quadros
• [PATCH v7 09/10] usb: dwc3: omap: manage "usb_otg_ss_refclk960m" clock   Roger Quadros
• [PATCH v7 10/10] usb: phy: omap-usb2: Manage phy clock and not otg controller clock   Roger Quadros
• [RFC PATCH 00/15] Add SATA support for TI OMAP5 and DRA7 SoCs   Roger Quadros
• [RFC PATCH 01/15] phy: rename struct omap_control_usb to struct omap_control_phy   Roger Quadros
• [RFC PATCH 02/15] phy: omap-control: Update DT binding information   Roger Quadros
• [RFC PATCH 03/15] ARM: dts: omap5: Add clocks to usb3_phy node   Roger Quadros
• [RFC PATCH 04/15] phy: omap-pipe3: use generic clock names   Roger Quadros
• [RFC PATCH 05/15] phy: omap-pipe3: Add SATA DPLL support   Roger Quadros
• [RFC PATCH 06/15] phy: omap-pipe3: update compatibility string and DT binding   Roger Quadros
• [RFC PATCH 07/15] ARM: dts: omap5: Update usb3phy node   Roger Quadros
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Roger Quadros
• [RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver   Roger Quadros
• [RFC PATCH 10/15] ARM: omap5: hwmod: Add ocp2scp3 and sata hwmods   Roger Quadros
• [RFC PATCH 11/15] arm: omap5: hwmod: add missing ocp2scp hwmod data   Roger Quadros
• [RFC PATCH 12/15] ARM: dts: omap5: add ocp2scp1 address resource   Roger Quadros
• [RFC PATCH 13/15] arm: dts: omap5: add sata node   Roger Quadros
• [RFC PATCH 14/15] ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods   Roger Quadros
• [RFC PATCH 15/15] arm: dts: dra7: add sata node   Roger Quadros
• [RFC PATCH 12/15] ARM: dts: omap5: add ocp2scp1 address resource   Roger Quadros
• [RFC PATCH 15/15] arm: dts: dra7: add sata node   Roger Quadros
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Roger Quadros
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Roger Quadros
• [RFC PATCH 15/15] arm: dts: dra7: add sata node   Roger Quadros
• [PATCH v7 09/10] usb: dwc3: omap: manage "usb_otg_ss_refclk960m" clock   Roger Quadros
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Roger Quadros
• [PATCH v2 2/9] usb: phy: nop: Don't use regulator framework for RESET line   Roger Quadros
• [PATCH v3 00/10] USB: phy: phy-nop: Manage RESET GPIO in the driver   Roger Quadros
• [PATCH v3 01/10] usb: phy: generic: Add gpio_reset to platform data   Roger Quadros
• [PATCH v3 02/10] usb: phy: generic: Don't use regulator framework for RESET line   Roger Quadros
• [PATCH v3 03/10] ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data   Roger Quadros
• [PATCH v3 04/10] ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes   Roger Quadros
• [PATCH v3 05/10] ARM: dts: omap3-beagle: Use reset-gpios for hsusb2_reset   Roger Quadros
• [PATCH v3 06/10] ARM: dts: omap4-panda: Use reset-gpios for hsusb1_reset   Roger Quadros
• [PATCH v3 07/10] ARM: dts: omap5-uevm: Use reset-gpios for hsusb2/3_reset   Roger Quadros
• [PATCH v3 08/10] ARM: dts: omap3-beagle: Make USB host pin naming consistent   Roger Quadros
• [PATCH v3 09/10] ARM: dts: omap3-beagle-xm: Add USB Host support   Roger Quadros
• [PATCH v3 10/10] ARM: dts: omap3-beagle: Add USB OTG PHY details   Roger Quadros
• [RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver   Roger Quadros
• [RFC PATCH 0/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Sricharan R
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Sricharan R
• [RFC PATCH 2/4] ARM: DTS: DRA: Add crossbar device binding   Sricharan R
• [RFC PATCH 3/4] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs.   Sricharan R
• [RFC PATCH 4/4] ARM: DRA: Kconfig: Enable crossbar irqchip driver for DRA7xx   Sricharan R
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Sricharan R
• [PATCH] ARM: DRA7: realtime_counter: Add ratio registers for 20MHZ sys-clk frequency   Sricharan R
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Sricharan R
• [PATCH V2] ARM: dts: DRA7: provide arch-timer frequenecy parameter   Sricharan R
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Sricharan R
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Sricharan R
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Sricharan R
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Sricharan R
• [PATCH V2] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Sricharan R
• [PATCH V3] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Sricharan R
• [PATCH V3] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Sricharan R
• [PATCH V4] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Sricharan R
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Sricharan R
• [RFC PATCH 0/6] DRIVERS: IRQCHIP: Add support for crossbar IP   Sricharan R
• [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [RFC PATCH 2/6] DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP   Sricharan R
• [RFC PATCH 3/6] ARM: DTS: DRA: Add crossbar device binding   Sricharan R
• [RFC PATCH 4/6] ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar inputs.   Sricharan R
• [RFC PATCH 5/6] ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number   Sricharan R
• [RFC PATCH 6/6] ARM: DRA: Enable Crossbar IP support for DRA7XX   Sricharan R
• [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Sricharan R
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Tobias Rauter
• [PATCH] clk: Move symbol export to proper location   Thierry Reding
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Thierry Reding
• [PATCHv3 1/4] pwm: Add Freescale FTM PWM driver support   Thierry Reding
• [RESEND PATCH v2] pwm: pxa: add device tree support to pwm driver   Thierry Reding
• [PATCH v2 00/10] of/irq: Defer interrupt reference resolution   Thierry Reding
• [PATCH v2 01/10] of/irq: Rework of_irq_count()   Thierry Reding
• [PATCH v2 02/10] of/irq: Use irq_of_parse_and_map()   Thierry Reding
• [PATCH v2 03/10] irqdomain: Introduce __irq_create_mapping()   Thierry Reding
• [PATCH v2 04/10] irqdomain: Return errors from irq_create_of_mapping()   Thierry Reding
• [PATCH v2 05/10] of/irq: Introduce __irq_of_parse_and_map()   Thierry Reding
• [PATCH v2 06/10] of/irq: Return errors from of_irq_to_resource()   Thierry Reding
• [PATCH v2 07/10] of/irq: Propagate errors in of_irq_to_resource_table()   Thierry Reding
• [PATCH v2 08/10] of/platform: Resolve interrupt references at probe time   Thierry Reding
• [PATCH v2 09/10] of/i2c: Resolve interrupt references at probe time   Thierry Reding
• [PATCH v2 10/10] gpio: tegra: Use module_platform_driver()   Thierry Reding
• [PATCH 0/2] pwm: atmel-tcb: config fixes   Thierry Reding
• [PATCH v4] PWM: PXA: add device tree support to PWM driver   Thierry Reding
• [PATCH] ARM: tegra_defconfig: enable CONFIG_ARM_APPENDED_DTB   Thierry Reding
• [PATCH v4] PWM: PXA: add device tree support to PWM driver   Thierry Reding
• [PATCH v2 04/10] irqdomain: Return errors from irq_create_of_mapping()   Thierry Reding
• [PATCH v2 07/10] of/irq: Propagate errors in of_irq_to_resource_table()   Thierry Reding
• [PATCH 00/10] pwm-backlight: Add GPIO and power supply support   Thierry Reding
• [PATCH 01/10] pwm-backlight: Refactor backlight power on/off   Thierry Reding
• [PATCH 02/10] pwm-backlight: Add optional enable GPIO   Thierry Reding
• [PATCH 03/10] ARM: OMAP: Initialize PWM backlight enable_gpio field   Thierry Reding
• [PATCH 04/10] ARM: pxa: Initialize PWM backlight enable_gpio field   Thierry Reding
• [PATCH 05/10] ARM: SAMSUNG: Initialize PWM backlight enable_gpio field   Thierry Reding
• [PATCH 06/10] ARM: shmobile: Initialize PWM backlight enable_gpio field   Thierry Reding
• [PATCH 07/10] unicore32: Initialize PWM backlight enable_gpio field   Thierry Reding
• [PATCH 08/10] pwm-backlight: Use new enable_gpio field   Thierry Reding
• [PATCH 09/10] pwm-backlight: Use an optional power supply   Thierry Reding
• [PATCH 10/10] pwm-backlight: Allow backlight to remain disabled on boot   Thierry Reding
• [PATCH 00/10] pwm-backlight: Add GPIO and power supply support   Thierry Reding
• [PATCH] ARM: imx: Include linux/err.h   Thierry Reding
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Sebastian Reichel
• [RFCv2 0/3] OMAP SSI driver   Sebastian Reichel
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Sebastian Reichel
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Sebastian Reichel
• [PATCH v2 0/9] wilink: add device tree support   Sebastian Reichel
• [PATCH v2 0/9] wilink: add device tree support   Sebastian Reichel
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Sebastian Reichel
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Sebastian Reichel
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Sebastian Reichel
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Sebastian Reichel
• [PATCH v3 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Zhu Richard-R65037
• [PATCH v6 3/3] PCI: imx6: Add support for i.MX6 PCIe controller   Zhu Richard-R65037
• [PATCH] arm, kbuild: make "make install" not depend on vmlinux   Robert Richter
• [Resend with ACK][PATCH] mm/arch: use NUMA_NODE   David Rientjes
• [PATCHv3] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black   Tom Rini
• [PATCHv6 1/2] ARM: sunxi: Initial support for Allwinner's Security ID fuses   Maxime Ripard
• [PATCHv6 1/2] ARM: sunxi: Initial support for Allwinner's Security ID fuses   Maxime Ripard
• [PATCHv7 1/2] ARM: sunxi: Initial support for Allwinner's Security ID fuses   Maxime Ripard
• [PATCHv7 2/2] ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i   Maxime Ripard
• [PATCH RFC] of: add a basic memory driver   Maxime Ripard
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   Maxime Ripard
• [PATCH 0/4] ARM: sun7i: Enable EMAC support for the A20   Maxime Ripard
• [PATCH 1/4] ARM: sun7i: Enable the Ethernet in the A20   Maxime Ripard
• [PATCH 2/4] ARM: sun7i: Add the muxing options for the EMAC   Maxime Ripard
• [PATCH 3/4] ARM: sun7i: cubieboard2: Enable the EMAC   Maxime Ripard
• [PATCH 4/4] ARM: sun7i: olinuxino-micro: Enable the EMAC   Maxime Ripard
• [PATCH 0/4] ARM: sun7i: Enable the I2C support for the A20   Maxime Ripard
• [PATCH 1/4] ARM: sun7i: Enable the I2C controllers   Maxime Ripard
• [PATCH 2/4] ARM: sun7i: Add the pin muxing options for the I2C controllers   Maxime Ripard
• [PATCH 3/4] ARM: sun7i: cubieboard2: Enable the I2C controllers   Maxime Ripard
• [PATCH 4/4] ARM: sun7i: olinuxino-micro: Enable the I2C controllers   Maxime Ripard
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   Maxime Ripard
• [PATCH 2/4] Add cpuconfig nodes in dts for smp configure.   Maxime Ripard
• [PATCH 0/4] ARM: sun7i: Enable the I2C support for the A20   Maxime Ripard
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Maxime Ripard
• [PATCH 1/2] ARM: sunxi: Split out the DT machines for sun6i and sun7i   Maxime Ripard
• [PATCH 2/2] ARM: sunxi: Simplify restart setup code   Maxime Ripard
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Maxime Ripard
• [PATCH 1/3] clk: sunxi: factors: fix off-by-one masks   Maxime Ripard
• [PATCH 2/3] clk: sunxi: factors: clear variables before using them   Maxime Ripard
• [PATCH 3/3] clk: sunxi: protect core clocks from accidental shutdown   Maxime Ripard
• [PATCH V3: Add Smp support for Allwinner A20. 2/3] Add cpuconfig nodes in dts for smp configure.   Maxime Ripard
• [PATCH V3: Add Smp support for Allwinner A20. 3/3] add arch count timer node in dts for Allwinner A20(sunxi 7i).   Maxime Ripard
• [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   Maxime Ripard
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Maxime Ripard
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Maxime Ripard
• [PATCH 1/5] clocksource: sun4i: Select CLKSRC_MMIO   Maxime Ripard
• [PATCH 2/5] clocksource: Add Allwinner SoCs HS timers driver   Maxime Ripard
• [PATCH 3/5] ARM: sun5i: a10s: Add support for the High Speed Timers   Maxime Ripard
• [PATCH 4/5] ARM: sun5i: a13: Add support for the High Speed Timers   Maxime Ripard
• [PATCH 5/5] ARM: sun7i: a20: Add support for the High Speed Timers   Maxime Ripard
• [PATCH] ARM: sunxi: Order Kconfig options alphabetically   Maxime Ripard
• [PATCH] ARM: sun6i: Fix the APB2 clock gates register size   Maxime Ripard
• [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   Maxime Ripard
• [PATCH] ARM: sunxi: Add a defconfig for the Allwinner SoCs   Maxime Ripard
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Maxime Ripard
• [PATCH 06/26] clk: sunxi: declare OF clock provider   Maxime Ripard
• [PATCH 23/26] ARM: sunxi: remove custom .init_time hook   Maxime Ripard
• [PATCH 2/5] clocksource: Add Allwinner SoCs HS timers driver   Maxime Ripard
• [PATCH 2/5] clocksource: Add Allwinner SoCs HS timers driver   Maxime Ripard
• [PATCH 1/2] ARM: sunxi: Split out the DT machines for sun6i and sun7i   Maxime Ripard
• [PATCH 2/2] ARM: sunxi: Simplify restart setup code   Maxime Ripard
• [PATCH 23/26] ARM: sunxi: remove custom .init_time hook   Maxime Ripard
• [PATCH 0/5] Allwinner SoCs High Speed Timer support   Maxime Ripard
• [PATCH 2/5] clocksource: Add Allwinner SoCs HS timers driver   Maxime Ripard
• [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   Maxime Ripard
• [PATCH v2] ARM: sunxi: Add a defconfig for the Allwinner SoCs   Maxime Ripard
• [PATCH 01/10] clk: sunxi: register factors clocks behind composite   Maxime Ripard
• [PATCH 02/10] clk: sunxi: add gating support to PLL1   Maxime Ripard
• [PATCH 04/10] clk: sunxi: add PLL5 and PLL6 support   Maxime Ripard
• [PATCH 06/10] clk: sunxi: mod0 support   Maxime Ripard
• [PATCH 00/10] clk: sunxi: PLL4/5/6, mod0 and mbus support   Maxime Ripard
• Build error in torvalds kernel 3.11 for omap2plus   Guenter Roeck
• Build error in torvalds kernel 3.11 for omap2plus   Guenter Roeck
• Build error in torvalds kernel 3.11 for omap2plus   Guenter Roeck
• Build error in torvalds kernel 3.11 for omap2plus   Guenter Roeck
• Build error in torvalds kernel 3.11 for omap2plus   Guenter Roeck
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v4] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH v5] clk: si570: Add a driver for SI570 oscillators   Guenter Roeck
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Guenter Roeck
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Guenter Roeck
• [PATCH] arm: mach-integrator: Add stub for pci_v3_early_init() for !CONFIG_PCI   Joerg Roedel
• [PATCH] ARM: integrator: Make sure INTEGRATOR_AP depends on PCI   Joerg Roedel
• [PATCH 6/7] iommu/arm-smmu: Add module parameter arm-smmu=off|force_isolation   Joerg Roedel
• [PATCH v3 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1   Pali Rohár
• [PATCH v4 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1   Pali Rohár
• [PATCH 0/4] Add support for charging battery in Nokia RX-51   Pali Rohár
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pali Rohár
• [PATCH 2/4] power: isp1704_charger: Fix driver to work with changes introduced in v3.5   Pali Rohár
• [PATCH 3/4] power: isp1704_charger: Add callback function set_current   Pali Rohár
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Pali Rohár
• [PATCH v4 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1   Pali Rohár
• [PATCH 0/4] Add support for charging battery in Nokia RX-51   Pali Rohár
• [PATCH v4 1/2] ARM: OMAP: Add secure function omap_smc3() which calling instruction smc #1   Pali Rohár
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pali Rohár
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pali Rohár
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pali Rohár
• [PATCH v2 2/2] RX-51: ARM errata 430973 workaround   Pali Rohár
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pali Rohár
• [PATCH 1/4] usb: musb: Call atomic_notifier_call_chain when status is changed   Pali Rohár
• [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD   Pali Rohár
• [PATCH usb 2/2] usb: musb: Call atomic_notifier_call_chain when status is changed   Pali Rohár
• [PATCH v2 2/2] RX-51: ARM errata 430973 workaround   Pali Rohár
• [PATCH v3 2/2] RX-51: ARM errata 430973 workaround   Pali Rohár
• [PATCH v4 2/2] RX-51: ARM errata 430973 workaround   Pali Rohár
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Pali Rohár
• [PATCH 0/4] Add support for charging battery in Nokia RX-51   Pali Rohár
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Pali Rohár
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Pali Rohár
• [PATCH 4/4] RX-51: Add platform function and data for bq24150a charger   Pali Rohár
• [PATCH usb 1/2] usb: musb: Add missing ATOMIC_INIT_NOTIFIER_HEAD   Pali Rohár
• [PATCH 0/4] Add smp support for Allwinner A20 and phy arch count timer   Fan Rong
• [PATCH 1/4] Add smp support for Allwinner A20(sunxi 7i).   Fan Rong
• [PATCH 2/4] Add cpuconfig nodes in dts for smp configure.   Fan Rong
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   Fan Rong
• [PATCH 4/4] Add arch count timer node in dts for Allwinner A20(sunxi 7i).   Fan Rong
• [PATCH 0/3]   Fan Rong
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   Fan Rong
• [PATCH 2/3] Add cpuconfig nodes in dts for smp configure.   Fan Rong
• [PATCH 3/3] Add arch count timer node in dts for Allwinner A20(sunxi 7i).   Fan Rong
• [PATCH V3: Add Smp support for Allwinner A20. 0/3]   Fan Rong
• [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   Fan Rong
• [PATCH V3: Add Smp support for Allwinner A20. 2/3] Add cpuconfig nodes in dts for smp configure.   Fan Rong
• [PATCH V3: Add Smp support for Allwinner A20. 3/3] add arch count timer node in dts for Allwinner A20(sunxi 7i).   Fan Rong
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Steven Rostedt
• [PATCH v1 7/7] jump_label: use defined macros instead of hard-coding for better readability   Steven Rostedt
• [PATCH v1 2/7] arm64: introduce interfaces to hotpatch kernel and module code   Steven Rostedt
• [PATCH v1 7/7] jump_label: use defined macros instead of hard-coding for better readability   Steven Rostedt
• [PATCH] net: stmmac: fix bad merge conflict resolution   Stephen Rothwell
• [ARM ATTEND] DT from the driver perspective   Frank Rowand
• [PATCH 1/5] arm: LLVMLinux: Add current_stack_pointer macro for ARM   Måns Rullgård
• [PATCH 2/5] arm: LLVMLinux: use current_stack_pointer for percpu   Måns Rullgård
• new binutils needed for arm in 3.12-rc1   Måns Rullgård
• new binutils needed for arm in 3.12-rc1   Måns Rullgård
• new binutils needed for arm in 3.12-rc1   Måns Rullgård
• new binutils needed for arm in 3.12-rc1   Måns Rullgård
• [PATCH v3] dt: update PSCI binding documentation for v0.2   Mark Rutland
• [PATCH 02/11] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Mark Rutland
• [PATCH 11/11] iio: pressure-core: st: Provide correct regulator support   Mark Rutland
• [PATCH 02/11] ARM: ux500: Enable the LPS001WP Pressure & Temperature sensor from DT   Mark Rutland
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   Mark Rutland
• [PATCH 1/4] Add smp support for Allwinner A20(sunxi 7i).   Mark Rutland
• [PATCH 0/4] Add smp support for Allwinner A20 and phy arch count timer   Mark Rutland
• [PATCH 4/4] Add arch count timer node in dts for Allwinner A20(sunxi 7i).   Mark Rutland
• [PATCH 0/4] Add smp support for Allwinner A20 and phy arch count timer   Mark Rutland
• [PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Mark Rutland
• [PATCH] ARM: dts: Update arch timer node with clock frequency   Mark Rutland
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Mark Rutland
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Mark Rutland
• [PATCH v2 1/2] Documentation: devicetree: arm: cpus/cpu nodes bindings updates   Mark Rutland
• [PATCH v2 2/2] arm: dt: Exynos5420: populate cpu node enteries to 8 cpus   Vikas Sajjan
• [PATCH] Documentation/arm64: clarify requirements for DTB placement   Mark Salter
• [PATCH v2 3/4] ARM: imx6sl: add imx6sl iomux-gpr field define   Otavio Salvador
• [PATCH v2 3/4] ARM: imx6sl: add imx6sl iomux-gpr field define   Otavio Salvador
• [PATCH v2 8/9] spi: prepare runtime PM support for SPI devices   Wolfram Sang
• [PATCH] i2c: s3c2410: fix clk_disable/clk_unprepare warnings   Wolfram Sang
• [PATCH 1/4] i2c: busses: i2c-st: Add ST I2C controller   Wolfram Sang
• [PATCH] misc: (at24) move header to linux/platform_data/   Wolfram Sang
• [PATCH v2 1/4] i2c: busses: i2c-st: Add ST I2C controller   Wolfram Sang
• [PATCH v2] misc: (at24) move header to linux/platform_data/   Wolfram Sang
• [PATCH 2/3 V3] i2c: mxs: Rework the PIO mode operation   Wolfram Sang
• [PATCH 2/3 V3] i2c: mxs: Rework the PIO mode operation   Wolfram Sang
• Clock framework deadlock with external SPI clockchip   Peter De Schrijver
• [PATCH] clk: tegra: replace enum tegra114_clk by binding header   Peter De Schrijver
• [PATCH 0/4] Introduce table driven initializations   Peter De Schrijver
• [PATCH 1/4] clk: tegra: simplify periph clock data   Peter De Schrijver
• [PATCH 2/4] clk: tegra: convert Tegra114 gate clocks to table   Peter De Schrijver
• [PATCH 3/4] clk: tegra114: table driven audio clock init   Peter De Schrijver
• [PATCH 4/4] clk: tegra114: table driven PMC clock init   Peter De Schrijver
• [PATCH 0/4] Introduce table driven initializations   Peter De Schrijver
• [PATCH v2 0/4] Introduce table driven initializations   Peter De Schrijver
• [PATCH v2 1/4] clk: tegra: simplify periph clock data   Peter De Schrijver
• [PATCH v2 2/4] clk: tegra: convert Tegra114 gate clocks to table   Peter De Schrijver
• [PATCH v2 3/4] clk: tegra114: table driven audio clock init   Peter De Schrijver
• [PATCH v2 4/4] clk: tegra114: table driven PMC clock init   Peter De Schrijver
• [PATCH v2 4/4 Resend] clk: tegra114: table driven PMC clock init   Peter De Schrijver
• [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver   Peter De Schrijver
• [PATCH 00/12] Introduce common infra for tegra clocks   Peter De Schrijver
• [PATCH 01/12] clk: tegra: simplify periph clock data   Peter De Schrijver
• [PATCH 02/12] clk: tegra: periph_clk_enb_refcnt as common infra   Peter De Schrijver
• [PATCH 03/12] clk: tegra: Add TEGRA_PERIPH_NO_DIV flag   Peter De Schrijver
• [PATCH 04/12] clk: tegra: move some PLLC and PLLXC init to clk-pll.c   Peter De Schrijver
• [PATCH 05/12] clk: tegra: add header for common tegra clock IDs   Peter De Schrijver
• [PATCH 06/12] clk: tegra: add common infra for DT clocks   Peter De Schrijver
• [PATCH 07/12] clk: tegra: move audio clk to common file   Peter De Schrijver
• [PATCH 08/12] clk: tegra: move periph clocks to common file   Peter De Schrijver
• [PATCH 09/12] clk: tegra: move PMC clocks to common file   Peter De Schrijver
• [PATCH 10/12] clk: tegra: move fixed clocks to common file   Peter De Schrijver
• [PATCH 11/12] clk: tegra: introduce common tegra_osc_clk_init   Peter De Schrijver
• [PATCH 12/12] clk: tegra: introduce common gen4 super clock   Peter De Schrijver
• [PATCH 00/12] Introduce common infra for tegra clocks   Peter De Schrijver
• [PATCH v2 00/12] Introduce common infra for tegra clocks   Peter De Schrijver
• [PATCH v2 01/12] clk: tegra: simplify periph clock data   Peter De Schrijver
• [PATCH v2 02/12] clk: tegra: common periph_clk_enb_refcnt and clks   Peter De Schrijver
• [PATCH v2 03/12] clk: tegra: Add TEGRA_PERIPH_NO_DIV flag   Peter De Schrijver
• [PATCH v2 04/12] clk: tegra: move some PLLC and PLLXC init to clk-pll.c   Peter De Schrijver
• [PATCH v2 05/12] clk: tegra: add header for common tegra clock IDs   Peter De Schrijver
• [PATCH v2 06/12] clk: tegra: add common infra for DT clocks   Peter De Schrijver
• [PATCH v2 07/12] clk: tegra: move audio clk to common file   Peter De Schrijver
• [PATCH v2 08/12] clk: tegra: move periph clocks to common file   Peter De Schrijver
• [PATCH v2 09/12] clk: tegra: move PMC clocks to common file   Peter De Schrijver
• [PATCH v2 10/12] clk: tegra: move fixed clocks to common file   Peter De Schrijver
• [PATCH v2 11/12] clk: tegra: introduce common tegra_osc_clk_init   Peter De Schrijver
• [PATCH v2 12/12] clk: tegra: introduce common gen4 super clock   Peter De Schrijver
• [PATCH 05/12] clk: tegra: add header for common tegra clock IDs   Peter De Schrijver
• [PATCH 08/12] clk: tegra: move periph clocks to common file   Peter De Schrijver
• [PATCH 10/12] clk: tegra: move fixed clocks to common file   Peter De Schrijver
• [PATCH] clk: tegra: PLLE spread spectrum control   Peter De Schrijver
• what about mach-shark?   Alexander Schulz
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Matt Sealey
• imprecise external abort using the flexcan driver on i.MX6Q   Matt Sealey
• [PATCH v4] dt: update PSCI binding documentation for v0.2   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• [PATCH 5/8] sdhci: sdhci-esdhc-imx: change pinctrl state according to uhs mode   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Matt Sealey
• imprecise external abort using the flexcan driver on i.MX6Q   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• device tree binding documentation outdated   Matt Sealey
• [GIT PULL] ARM: DTS: Fix OMAP bugs for 3.12-rc   Enric Balletbo Serra
• [PATCH] ASoC: atmel: disable error interrupt   Bo Shen
• [PATCH v3] PWM: at91: add Atmel PWM controller driver   Bo Shen
• [PATCH v4] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH v4] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH] PWM: atmel-pwm: use request/free instead of enable/disable   Bo Shen
• [PATCH v5] PWM: atmel-pwm: add PWM controller driver   Bo Shen
• [PATCH 1/2] ARM: i.MX6: dts: change iomuxc pinctrl config to match Rev. 1 IMX6DQRM   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 5/8] spi: Add Freescale QuadSpi driver   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH] ARM: dts: imx6q: fix the wrong offset of the Pad Mux register   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Huang Shijie
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Santosh Shilimkar
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Santosh Shilimkar
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Santosh Shilimkar
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Santosh Shilimkar
• [PATCH] ARM: dts: DRA7: provide arch-timer frequenecy parameter   Santosh Shilimkar
• [PATCH V2] ARM: dts: DRA7: provide arch-timer frequenecy parameter   Santosh Shilimkar
• [PATCH] ARM: DRA7: realtime_counter: Add ratio registers for 20MHZ sys-clk frequency   Santosh Shilimkar
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Santosh Shilimkar
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Santosh Shilimkar
• [PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register   Santosh Shilimkar
• [PATCH] ARM: OMAP5: id: Remove ES1.0 support   Santosh Shilimkar
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Santosh Shilimkar
• [PATCH] ARM: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices   Santosh Shilimkar
• [PATCH 0/3 v2] clk: keystone: Add common clock drivers   Santosh Shilimkar
• [PATCH 0/3 v2] clk: keystone: Add common clock drivers   Santosh Shilimkar
• [PATCH v3 0/3] clk: keystone: Add common clock drivers   Santosh Shilimkar
• [PATCH v3 1/3] clk: keystone: add Keystone PLL clock driver   Santosh Shilimkar
• [PATCH v3 2/3] clk: keystone: Add gate control clock driver   Santosh Shilimkar
• [PATCH v3 3/3] clk: keystone: Build Keystone clock drivers   Santosh Shilimkar
• imprecise external abort using the flexcan driver on i.MX6Q   Santosh Shilimkar
• [PATCH 0/4] ARM: keystone: Enable SPI and I2C support   Santosh Shilimkar
• [PATCH 1/4] ARM: dts: keystone: Add i2c device nodes   Santosh Shilimkar
• [PATCH 2/4] ARM: dts: keystone: Add the SPI nodes   Santosh Shilimkar
• [PATCH 3/4] spi: davinci: Allow SPI to be build without EDMA support   Santosh Shilimkar
• [PATCH 4/4] ARM: keystone: Enable I2C and SPI bus support   Santosh Shilimkar
• [PATCH 3/4] spi: davinci: Allow SPI to be build without EDMA support   Santosh Shilimkar
• [RFC PATCH 0/6] DRIVERS: IRQCHIP: Add support for crossbar IP   Santosh Shilimkar
• [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Santosh Shilimkar
• [PATCH 3/4] spi: davinci: Allow SPI to be build without EDMA support   Santosh Shilimkar
• [PATCH] spi: davinci: Fix the build warning with CONFIG_ARM_LPAE=y   Santosh Shilimkar
• [PATCH v2 0/5] ARM: keystone: Enable SPI and I2C support   Santosh Shilimkar
• [PATCH v2 1/5] ARM: dts: keystone: Add i2c device nodes   Santosh Shilimkar
• [PATCH v2 2/5] ARM: dts: keystone: Add the SPI nodes   Santosh Shilimkar
• [PATCH v2 3/5] dma: Allow TI_EDMA selectable for ARCH_KEYSTONE   Santosh Shilimkar
• [PATCH v2 4/5] ARM: keystone: Select TI_EDMA to be able to enable SPI driver   Santosh Shilimkar
• [PATCH v2 5/5] ARM: keystone: Enable I2C and SPI bus support   Santosh Shilimkar
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Sergei Shtylyov
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Sergei Shtylyov
• [PATCH 1/4] ARM: shmobile: r8a7778: add Ether DT support   Sergei Shtylyov
• [PATCH] pwm: pxa: add device tree support to pwm driver   Sergei Shtylyov
• [PATCH v2 0/2] R8A7779/Marzen: HPB-DMAC support for SDHI0   Sergei Shtylyov
• [PATCH v2 0/4] Add Ether DT support for R8A7778/BOCK-W reference board   Sergei Shtylyov
• [PATCH v2 1/4] ARM: shmobile: r8a7778: add Ether DT support   Sergei Shtylyov
• [PATCH v2 2/4] ARM: shmobile: r8a7778: add Ether clock for DT case   Sergei Shtylyov
• [PATCH v2 3/4] ARM: shmobile: bockw-reference: add Ether DT support   Sergei Shtylyov
• [PATCH v2 4/4] ARM: shmobile: BOCK-W reference: add Ether PFC settings   Sergei Shtylyov
• [patch 1/1] imx51.dtsi: fix PATA device clock   Sergei Shtylyov
• [PATCH v2 4/4] ARM: shmobile: BOCK-W reference: add Ether PFC settings   Sergei Shtylyov
• [PATCH] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup   Sergei Shtylyov
• [RFC PATCH 15/15] arm: dts: dra7: add sata node   Sergei Shtylyov
• [RFC PATCH 12/15] ARM: dts: omap5: add ocp2scp1 address resource   Sergei Shtylyov
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Sergei Shtylyov
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Sergei Shtylyov
• [RFC PATCH 15/15] arm: dts: dra7: add sata node   Sergei Shtylyov
• [PATCH] ARM: drop <asm/types.h> from generic-y   Sergei Shtylyov
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Sergei Shtylyov
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Sergei Shtylyov
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Sergei Shtylyov
• [PATCH v2 4/4] ARM: shmobile: BOCK-W reference: add Ether PFC settings   Sergei Shtylyov
• [PATCH v2 2/2] ARM: shmobile: Marzen: enable DMA for SDHI0   Sergei Shtylyov
• [PATCH] ARM: shmobile: Lager: add Micrel KSZ8041 PHY fixup   Sergei Shtylyov
• [PATCH v2 4/4] ARM: shmobile: BOCK-W reference: add Ether PFC settings   Sergei Shtylyov
• [PATCH 0/2] Add CAN0 support for R8A7778/BOCK-W board   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: r8a7778: add CAN clock support   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: BOCK-W: add CAN0 support   Sergei Shtylyov
• [PATCH 1/2] ARM: shmobile: bockw: enable HPB-DMAC in defconfig   Sergei Shtylyov
• [PATCH 2/2] ARM: shmobile: marzen: enable HPB-DMAC in defconfig   Sergei Shtylyov
• [RFC PATCH] amba: Ensure drvdata is NULL   Michal Simek
• [RFC PATCH] amba: Ensure drvdata is NULL   Michal Simek
• [PATCH v2 0/4] arm: zynq: Enable global timer   Michal Simek
• [RFC PATCH] ARM: zynq: cpuidle: convert to platform driver   Michal Simek
• [RFC PATCH] ARM: zynq: cpuidle: convert to platform driver   Michal Simek
• [PATCH 1/2] ARM: zynq: cpuidle: Remove useless compatibility string   Michal Simek
• [PATCH 2/2] ARM: zynq: cpuidle: convert to platform driver   Michal Simek
• [PATCH 1/2] ARM: zynq: cpuidle: Remove useless compatibility string   Michal Simek
• [PATCH] amba: Ensure drvdata is NULL   Michal Simek
• [PATCH] ARM: amba: Extend number of IRQS   Michal Simek
• [RFC] ARM: kernel: io: Optimize memcpy_fromio function.   Pardeep Kumar Singla
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Gerhard Sittig
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Gerhard Sittig
• Unhandled prefetch abort on mirabox with 3.11-rc7   Jochen De Smet
• Unhandled prefetch abort on mirabox with 3.11-rc7   Jochen De Smet
• Unhandled prefetch abort on mirabox with 3.11-rc7   Jochen De Smet
• Unhandled prefetch abort on mirabox with 3.11-rc7   Jochen De Smet
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Barry Song
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Barry Song
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Barry Song
• [PATCH] dmaengine: sirf: add dmaengine_prep_slave_single/sg support   Barry Song
• [PATCH v2] watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI   Barry Song
• [PATCH v2] watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI   Barry Song
• [PATCH 04/26] clk: prima2: declare OF clock provider   Barry Song
• [PATCH v2] watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI   Barry Song
• [PATCH] clk: sirf: re-arch to make the codes support both prima2 and atlas6   Barry Song
• [PATCH 04/26] clk: prima2: declare OF clock provider   Barry Song
• [PATCH 0/9] arm/dts: sirf: a bundle of fixed for prima2 and atlas6   Barry Song
• [PATCH 1/9] arm/dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts   Barry Song
• [PATCH 2/9] arm/dts: sirf: add missed chhifbg node in prima2 and atlas6 dts   Barry Song
• [PATCH 3/9] arm/dts: sirf: add missed graphics2d iobg in atlas6 dts   Barry Song
• [PATCH 4/9] arm/dts: sirf: fix fifosize, clks, dma channels for UART   Barry Song
• [PATCH 5/9] arm/dts: sirf: add missed cell, cs and dma channel for SPI nodes   Barry Song
• [PATCH 6/9] arm/dts: sirf: add missed address-cells and size-cells for prima2 I2C   Barry Song
• [PATCH 7/9] arm/dts: makefile: build atlas6-evb.dtb for ARCH_ATLAS6   Barry Song
• [PATCH 8/9] arm/dts: sirf: fix interrupt and dma prop of VIP for prima2 and atlas6   Barry Song
• [PATCH 9/9] arm/dts: sirf: fix the ranges of peri-iobrg of prima2   Barry Song
• [PATCH 04/26] clk: prima2: declare OF clock provider   Barry Song
• [GIT PULL]ARM: sirf: dts fixes for 3.12-rc   Barry Song
• [PATCH 1/3] pinctrl: sirf: add lost uart0-no-stream-control pingroup for prima2   Barry Song
• [PATCH 2/3] pinctrl: sirf: add lost USP-based UART pin groups for prima2   Barry Song
• [PATCH 3/3] pinctrl: sirf: add USB1/UART1 pinmux usb/uart share   Barry Song
• [PATCH 1/2] MAINTAINERS: ARM: SIRF: add missed drivers into maintain list   Barry Song
• [PATCH 2/2] MAINTAINERS: ARM: SIRF: use kernel.org mail box   Barry Song
• [Xen-devel] [PATCH v5 02/13] arm: introduce a global dma_ops pointer   Stefano Stabellini
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v5 12/13] swiotlb-xen: use xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v5 03/13] arm64: define DMA_ERROR_CODE   Stefano Stabellini
• [PATCH v5 05/13] xen/arm,arm64: move Xen initialization earlier   Stefano Stabellini
• [PATCH v3] ARM: xen: only set pm function ptrs for Xen guests   Stefano Stabellini
• [PATCH v5 05/13] xen/arm,arm64: move Xen initialization earlier   Stefano Stabellini
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v5 12/13] swiotlb-xen: use xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v5 11/13] xen: introduce xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v6 0/19] enable swiotlb-xen on arm and arm64   Stefano Stabellini
• [PATCH v6 01/19] arm: make SWIOTLB available   Stefano Stabellini
• [PATCH v6 02/19] arm64: define DMA_ERROR_CODE   Stefano Stabellini
• [PATCH v6 03/19] xen: introduce XENMEM_exchange_and_pin and XENMEM_unpin   Stefano Stabellini
• [PATCH v6 04/19] xen: make xen_create_contiguous_region return the dma address   Stefano Stabellini
• [PATCH v6 05/19] swiotlb-xen: support autotranslate guests   Stefano Stabellini
• [PATCH v6 06/19] xen/arm,arm64: enable SWIOTLB_XEN   Stefano Stabellini
• [PATCH v6 07/19] swiotlb-xen: introduce xen_swiotlb_set_dma_mask   Stefano Stabellini
• [PATCH v6 08/19] arm/xen: get_dma_ops: return xen_dma_ops if we are running on Xen   Stefano Stabellini
• [PATCH v6 09/19] arm64/xen: get_dma_ops: return xen_dma_ops if we are running on Xen   Stefano Stabellini
• [PATCH v6 10/19] xen: introduce xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v6 11/19] swiotlb-xen: use xen_alloc/free_coherent_pages   Stefano Stabellini
• [PATCH v6 12/19] swiotlb: don't assume that io_tlb_start-io_tlb_end is coherent   Stefano Stabellini
• [PATCH v6 13/19] ASoC: Samsung: Rename dma_ops by samsung_dma_ops   Stefano Stabellini
• [PATCH v6 14/19] swiotlb: print a warning when the swiotlb is full   Stefano Stabellini
• [PATCH v6 15/19] swiotlb-xen: call dma_capable only if dev->dma_mask is allocated   Stefano Stabellini
• [PATCH v6 16/19] arm, arm64: do not always merge biovec if we are running on Xen   Stefano Stabellini
• [PATCH v6 17/19] xen: introduce XENMEM_pin   Stefano Stabellini
• [PATCH v6 18/19] swiotlb-xen: introduce a rbtree to track phys to bus mappings   Stefano Stabellini
• [PATCH v6 19/19] swiotlb-xen: instead of bouncing on the swiotlb, pin single pages   Stefano Stabellini
• [PATCH 2/2] ARM: OMAP4+: Move SRAM data to DT   Lucas Stach
• kmalloc memory slower than malloc   Lucas Stach
• kmalloc memory slower than malloc   Lucas Stach
• [PATCH 1/2] ARM: dts: imx53-qsb: add TVE entry   Lucas Stach
• [PATCH 2/2] ARM: dts: imx53-qsb: select open-drain mode for i2c1 pads   Lucas Stach
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Tomasz Stanislawski
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Tomasz Stanislawski
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Tomasz Stanislawski
• [PATCH v5 2/4] media: s5p-tv: Restore vpll clock rate   Tomasz Stanislawski
• [PATCH v5 3/4] media: s5p-tv: Fix sdo driver to work with CCF   Tomasz Stanislawski
• [PATCH v5 4/4] media: s5p-tv: Fix mixer driver to work with CCF   Tomasz Stanislawski
• [PATCH v5 4/4] media: s5p-tv: Fix mixer driver to work with CCF   Tomasz Stanislawski
• [PATCH 36/51] DMA-API: usb: use dma_set_coherent_mask()   Alan Stern
• [PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver   Alan Stern
• [PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver   Alan Stern
• [PATCH] ARM: LPC32xx: Fix reset function   Roland Stigge
• [Linaro-mm-sig] [RFC 0/1] drm/pl111: Initial drm/kms driver for pl111   Daniel Stone
• [RFC][PATCH] rtc: rtc-pl031: Set wakeup flag prior to registering rtcdev   John Stultz
• [RFC][PATCH] rtc: rtc-pl031: Set wakeup flag prior to registering rtcdev   John Stultz
• [GIT PULL] drivers/clocksource: sched_clock_register() conversion for 3.13 (via tip/timers/core)   John Stultz
• [GIT PULL] drivers/clocksource: sched_clock_register() conversion for 3.13 (via tip/timers/core)   John Stultz
• [RFC, PATCH] clocksource: provide timekeeping for efm32 SoCs   John Stultz
• [GIT PULL v2] drivers/clocksource: sched_clock_register() conversion for 3.13 (via tip/timers/core)   John Stultz
• [GIT PULL]: clocksource: new material for 3.13   John Stultz
• [GIT PULL]: clocksource: new material for 3.13   John Stultz
• [PATCHv4 2/2] clocksource: dw_apb_timer_of: Fix read_sched_clock   Heiko Stübner
• [PATCH 20/26] ARM: rockchip: remove custom .init_time hook   Heiko Stübner
• [PATCH 24/51] DMA-API: dma: pl330: add dma_set_mask_and_coherent() call   Heiko Stübner
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Marek Szyprowski
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Marek Szyprowski
• [PATCH v7 3/4] drivers: of: add initialization code for dma reserved memory   Marek Szyprowski
• [PATCH 3/9] ARM: dma-mapping: Always pass proper prot flags to iommu_map()   Marek Szyprowski
• [PATCH v2 0/4] Add I2C support to ST SoCs   Alexandre TORGUE
• [PATCH] arm64: avoid multiple evaluation of ptr in get_user/put_user()   AKASHI Takahiro
• [PATCH] arm64: avoid multiple evaluation of ptr in get_user/put_user()   AKASHI Takahiro
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()   Archit Taneja
• [PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()   Archit Taneja
• RFD on DMA_BIT_MASK and LPAE   Alexander Tarasikov
• RFD on DMA_BIT_MASK and LPAE   Alexander Tarasikov
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Willy Tarreau
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Willy Tarreau
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Willy Tarreau
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Willy Tarreau
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Willy Tarreau
• mvneta: oops in __rcu_read_lock on mirabox   Willy Tarreau
• mvneta: oops in __rcu_read_lock on mirabox   Willy Tarreau
• mvneta: oops in __rcu_read_lock on mirabox   Willy Tarreau
• mvneta: oops in __rcu_read_lock on mirabox   Willy Tarreau
• mvneta: oops in __rcu_read_lock on mirabox   Willy Tarreau
• mvneta: oops in __rcu_read_lock on mirabox   Willy Tarreau
• mvneta: oops in __rcu_read_lock on mirabox   Willy Tarreau
• [PATCHv2] Route kbd LEDs through the generic LEDs layer   Samuel Thibault
• [PATCH 5/6] RFC: input: i8042: drop dependency on ARCH_SHARK   Dmitry Torokhov
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Dmitry Torokhov
• [PATCH 2/7] input: misc: ixp4-beeper: switch to use gpiolib   Dmitry Torokhov
• [PATCH 3/7 v2] input: misc: ixp4-beeper: use gpiolib strictly   Dmitry Torokhov
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   Linus Torvalds
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   Linus Torvalds
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   Linus Torvalds
• [PATCH 0/3] socfpga: dts: cleanups   Steffen Trumtrar
• [PATCH 1/3] ARM: socfpga: dts: Move common nodes to cyclone5 dtsi   Steffen Trumtrar
• [PATCH 2/3] ARM: socfpga: dts: cleanup indentation   Steffen Trumtrar
• [PATCH 3/3] ARM: socfpga: dts: fix s2f_* clock name   Steffen Trumtrar
• [PATCH] ARM: socfpga: dts: Add support for terasic SoCkit   Steffen Trumtrar
• [PATCH 01/19] arm: Change variable type to bool   Peter Senna Tschudin
• [PATCH] clk: Move symbol export to proper location   Mike Turquette
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Mike Turquette
• Clock framework deadlock with external SPI clockchip   Mike Turquette
• [RFC Patch v2 0/3] add temporary parent migration support   Mike Turquette
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Mike Turquette
• [RFC Patch v2 0/3] add temporary parent migration support   Mike Turquette
• [PATCH] clk: only call get_parent if there is one   Mike Turquette
• [PATCHv6 01/45] CLK: TI: Add DPLL clock support   Mike Turquette
• [PATCH RFC] of: add a basic memory driver   Mike Turquette
• [PATCH v2 00/12] clk/exynos convert clock IDs to macros   Mike Turquette
• question about clk notifier in common clock tree   Mike Turquette
• [PATCH v2] clk: si570: Add a driver for SI570 oscillators   Mike Turquette
• [PATCH 0/3 v2] clk: keystone: Add common clock drivers   Mike Turquette
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Ethan Tuttle
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Ethan Tuttle
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   Ethan Tuttle
• mvneta: oops in __rcu_read_lock on mirabox   Ethan Tuttle
• mvneta: oops in __rcu_read_lock on mirabox   Ethan Tuttle
• mvneta: oops in __rcu_read_lock on mirabox   Ethan Tuttle
• mvneta: oops in __rcu_read_lock on mirabox   Ethan Tuttle
• mvneta: oops in __rcu_read_lock on mirabox   Ethan Tuttle
• mvneta: oops in __rcu_read_lock on mirabox   Ethan Tuttle
• [PATCH] ARM: ks8695: fix incorrect placement of __initdata tag   Greg Ungerer
• [RFC PATCH 04/11] asm-generic: fncpy: Add function copying macros   Geert Uytterhoeven
• new binutils needed for arm in 3.12-rc1   Geert Uytterhoeven
• About atags_proc buffer size   Geert Uytterhoeven
• [PATCHv2 3/5] drivers: thermal: make usage of CONFIG_THERMAL_HWMON optional   Eduardo Valentin
• [PATCH 08/16] arm: dts: add omap4 CPU thermal data   Eduardo Valentin
• [PATCH 09/16] arm: dts: add omap4430 thermal data   Eduardo Valentin
• [PATCH 10/16] arm: dts: add omap4460 thermal data   Eduardo Valentin
• [PATCH 11/16] arm: dts: add cooling properties on omap4430 cpu node   Eduardo Valentin
• [PATCH 12/16] arm: dts: add cooling properties on omap4460 cpu node   Eduardo Valentin
• [PATCH 13/16] arm: dts: add omap5 GPU thermal data   Eduardo Valentin
• [PATCH 14/16] arm: dts: add omap5 CORE thermal data   Eduardo Valentin
• [PATCH 15/16] arm: dts: add omap5 thermal data   Eduardo Valentin
• [PATCH 16/16] arm: dts: add cooling properties on omap5 cpu node   Eduardo Valentin
• [PATCHv4 10/18] arm: dts: add omap4 CPU thermal data   Eduardo Valentin
• [PATCHv4 11/18] arm: dts: add omap4430 thermal data   Eduardo Valentin
• [PATCHv4 12/18] arm: dts: add omap4460 thermal data   Eduardo Valentin
• [PATCHv4 13/18] arm: dts: add cooling properties on omap4430 cpu node   Eduardo Valentin
• [PATCHv4 14/18] arm: dts: add cooling properties on omap4460 cpu node   Eduardo Valentin
• [PATCHv4 15/18] arm: dts: add omap5 GPU thermal data   Eduardo Valentin
• [PATCHv4 16/18] arm: dts: add omap5 CORE thermal data   Eduardo Valentin
• [PATCHv4 17/18] arm: dts: add omap5 thermal data   Eduardo Valentin
• [PATCHv4 18/18] arm: dts: add cooling properties on omap5 cpu node   Eduardo Valentin
• [PATCHv4 11/18] arm: dts: add omap4430 thermal data   Eduardo Valentin
• [PATCHv4 11/18] arm: dts: add omap4430 thermal data   Eduardo Valentin
• [PATCH v3 0/5] ARM: vf610: Add DCU framebuffer driver for Vybrid VF610 platform   Tomi Valkeinen
• [PATCH 6/6] video: drop code for ARCH_SHARK in cyber2000fb   Tomi Valkeinen
• [PATCH v3 0/5] ARM: vf610: Add DCU framebuffer driver for Vybrid VF610 platform   Tomi Valkeinen
• [PATCH] video: mmp: drop needless devm cleanup   Tomi Valkeinen
• [PATCH] video: mmp: drop needless devm cleanup   Tomi Valkeinen
• [PATCH] video: mxsfb: Add missing break   Tomi Valkeinen
• [PATCH] pwm: pxa: add device tree support to pwm driver   Marek Vasut
• [PATCH 2/5] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits   Marek Vasut
• [PATCH] pwm: pxa: add device tree support to pwm driver   Marek Vasut
• [PATCH] pwm: pxa: add device tree support to pwm driver   Marek Vasut
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Marek Vasut
• [PATCH] pwm: pxa: add device tree support to pwm driver   Marek Vasut
• [patch] iio: mxs-lradc: use helper functions to simplify the code   Marek Vasut
• [PATCH 4/5] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Marek Vasut
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Marek Vasut
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Marek Vasut
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Marek Vasut
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Marek Vasut
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Marek Vasut
• [PATCH 3/5] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC driver   Marek Vasut
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Marek Vasut
• [PATCH 3/6] Staging/iio/adc/touchscreen/MXS: simplify register access   Marek Vasut
• [PATCH 4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver   Marek Vasut
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Marek Vasut
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Marek Vasut
• [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection   Marek Vasut
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Marek Vasut
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Marek Vasut
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Marek Vasut
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Marek Vasut
• [PATCH] clk: mxs: source LCD clock from PLL instead of from ref_xtal   Marek Vasut
• [PATCHv6] staging/iio/adc: change the MXS touchscreen driver implementation   Marek Vasut
• [PATCH] video: mxsfb: Add missing break   Marek Vasut
• [PATCH 1/2] ARM: dts: mxs: Add muxing options for the SSP2 MMC   Marek Vasut
• [PATCH 2/2] ARM: dts: mxs: Add MSR M28CU3 board   Marek Vasut
• [PATCH 1/3] crypto: Fully restore ahash request before completing   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 3/3] ARM: mxs: dts: Enable DCP for MXS   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 3/3] ARM: mxs: dts: Enable DCP for MXS   Marek Vasut
• [PATCH] video: mxsfb: Add missing break   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Marek Vasut
• [PATCH 3/3] ARM: mxs: dts: Enable DCP for MXS   Marek Vasut
• [PATCH V2] ARM: dts: mxs: Add MSR M28CU3 board   Marek Vasut
• [PATCH] ARM: mxs: stub out mxs_pm_init for !CONFIG_PM   Marek Vasut
• [PATCH 1/3 V2] i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller   Marek Vasut
• [PATCH 2/3 V3] i2c: mxs: Rework the PIO mode operation   Marek Vasut
• [PATCH 3/3 V3] i2c: mxs: Fix PIO mode on i.MX23   Marek Vasut
• [PATCH 2/3 V3] i2c: mxs: Rework the PIO mode operation   Marek Vasut
• [PATCHv2 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Rohit Vaswani
• [PATCHv2 2/2] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974   Rohit Vaswani
• [PATCHv2 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Rohit Vaswani
• [PATCHv2 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Rohit Vaswani
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Rohit Vaswani
• [PATCHv3 2/2] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974   Rohit Vaswani
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Rohit Vaswani
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Rohit Vaswani
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Rohit Vaswani
• [PATCH 1/2] ARM: msm: Remove irqs-*.h files for DT based targets   Rohit Vaswani
• [PATCH 2/2] ARM: msm: Create a common board-dt and config ARCH_MSM_DT   Rohit Vaswani
• [PATCHv2 1/2] ARM: msm: Remove irqs-*.h files for DT based targets   Rohit Vaswani
• [PATCHv2 2/2] ARM: msm: Create a common board-dt and config ARCH_MSM_DT   Rohit Vaswani
• [PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard   Rohit Vaswani
• [PATCH] ARM: msm: Move msm devicetrees under a Qualcomm dir   Rohit Vaswani
• No subject   Rohit Vaswani
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Rohit Vaswani
• [PATCH 3/3] defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974   Rohit Vaswani
• [PATCH 1/3] ARM: debug: Create CONFIG_DEBUG_MSM_UART and re-organize the selects for MSM   Rohit Vaswani
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Rohit Vaswani
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Rohit Vaswani
• [PATCHv4 2/3] ARM: msm: Add support for APQ8074 Dragonboard   Rohit Vaswani
• [PATCH 1/3] dmaengine: pl330: Set residue in tx_status callback.   Padma Venkat
• [PATCH 0/3] Add pl330 residue support   Padmavathi Venna
• [PATCH 1/3] dmaengine: pl330: Set residue in tx_status callback.   Padmavathi Venna
• [PATCH 2/3] ARM: SAMSUNG: Add residue DMA operation.   Padmavathi Venna
• [PATCH 3/3] ASoC: Update pointer to account for pending dma transfers.   Padmavathi Venna
• [PATCH 19/51] DMA-API: media: dt3155v4l: replace dma_set_mask()+dma_set_coherent_mask() with new helper   Hans Verkuil
• [PATCH] ARM: dts: AM4372: Add node for dma-controller   Lokesh Vutla
• [PATCH 3/4] ARM: nomadik: register VMMC regulator   Linus Walleij
• [PATCH 4/4] ARM: nomadik: delete MMCI platform data   Linus Walleij
• [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree   Linus Walleij
• Inte IOP Xscale updates   Linus Walleij
• [PATCH V3 1/4] mmc: mmci: Adapt to new pinctrl handling   Linus Walleij
• [PATCH V3 2/4] mmc: mmci: Use optional sleep pinctrl state   Linus Walleij
• [PATCH] ARM: omap2: throw the die id into the entropy pool   Linus Walleij
• [PATCH v2] ARM: omap2: throw the die id into the entropy pool   Linus Walleij
• [PATCH] ARM: tegra: throw the unique chip ID into the entropy pool   Linus Walleij
• [PATCH 1/6] RFC: ARM: delete mach-shark   Linus Walleij
• [PATCH 2/6] RFC: MAINTAINERS: delete Shark machine entry   Linus Walleij
• [PATCH 3/6] RFC: block: drop dependency on ARCH_SHARK   Linus Walleij
• [PATCH 4/6] RFC: ide: drop dependency on ARCH_SHARK   Linus Walleij
• [PATCH 5/6] RFC: input: i8042: drop dependency on ARCH_SHARK   Linus Walleij
• [PATCH 6/6] RFC: video: drop code for ARCH_SHARK in cyber2000fb   Linus Walleij
• [PATCH] ARM: tegra: throw the unique chip ID into the entropy pool   Linus Walleij
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Linus Walleij
• [PATCH 02/04] ARM: shmobile: r8a7791 SCIF support   Linus Walleij
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Linus Walleij
• Inte IOP Xscale updates   Linus Walleij
• [PATCH 02/04] ARM: shmobile: r8a7791 SCIF support   Linus Walleij
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Linus Walleij
• [PATCH] crypto: tegra: use kernel entropy instead of ad-hoc   Linus Walleij
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Linus Walleij
• [PATCH 01/04] ARM: shmobile: Initial r8a7791 SoC support   Linus Walleij
• [PATCH 0/8] IOP GPIO refactoring   Linus Walleij
• [PATCH 1/8] ARM: plat-iop: move the GPIO driver to drivers/gpio   Linus Walleij
• [PATCH 2/8] ARM: iop32x: request and issue reset using gpio   Linus Walleij
• [PATCH 3/8] ARM: iop32x: read N2100 power key using gpiolib   Linus Walleij
• [PATCH 4/8] gpio: decouple the IOP GPIO driver from platform   Linus Walleij
• [PATCH 5/8] ARM: plat-iop: remove custom complex GPIO implementation   Linus Walleij
• [PATCH 6/8] ARM: plat-iop: instantiate GPIO from platform device   Linus Walleij
• [PATCH 7/8] gpio: iop: use readl/writel accessors   Linus Walleij
• [PATCH 8/8] ARM: plat-iop: pass physical base for GPIO   Linus Walleij
• Inte IOP Xscale updates   Linus Walleij
• [PATCH v2] ARM: omap2: throw the die id into the entropy pool   Linus Walleij
• [PATCH 0/7] IXP4 GPIO consolidation   Linus Walleij
• [PATCH 1/7] ARM: ixp4xx: convert remaining users to use gpiolib   Linus Walleij
• [PATCH 2/7] misc: ixp4-beeper: switch to use gpiolib   Linus Walleij
• [PATCH 3/7] misc: ixp4-beeper: use gpiolib strictly   Linus Walleij
• [PATCH 4/7] ptp: switch to use gpiolib   Linus Walleij
• [PATCH 5/7] staging: media/lirc: switch to use gpiolib   Linus Walleij
• [PATCH 6/7] ARM: ixp4: delete irq_to_gpio   Linus Walleij
• [PATCH 7/7] ARM: ixp4xx: stop broadcasting the custom GPIO API   Linus Walleij
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Linus Walleij
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Linus Walleij
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Linus Walleij
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Linus Walleij
• [PATCH 2/2] dma: ste_dma40: Fix potential null pointer dereference   Linus Walleij
• [PATCH 01/38] ARM: ux500: Remove PrimeCell IDs from Nomadik I2C DT nodes   Linus Walleij
• [PATCH 21/33] clk: ux500: Add Device Tree support for the PRCC Kernel clock   Linus Walleij
• [PATCH 1/2] ARM: ux500: delete surplus PRCMU regulator defines   Linus Walleij
• [PATCH 2/2] ARM: ux500: skip redefined regulator names on v60plus board   Linus Walleij
• [PATCH 5/7] staging: media/lirc: switch to use gpiolib   Linus Walleij
• [PATCH 21/33] clk: ux500: Add Device Tree support for the PRCC Kernel clock   Linus Walleij
• Inte IOP Xscale updates   Linus Walleij
• [PATCH 1/8 v2] ARM: plat-iop: move the GPIO driver to drivers/gpio   Linus Walleij
• [PATCH 0/8] IOP GPIO refactoring   Linus Walleij
• [PATCH 2/8 v2] ARM: iop32x: request and issue reset using gpio   Linus Walleij
• [PATCH 3/8 v2] ARM: iop32x: read N2100 power key using gpiolib   Linus Walleij
• [PATCH 0/8] IOP GPIO refactoring   Linus Walleij
• [PATCH 2/7] misc: ixp4-beeper: switch to use gpiolib   Linus Walleij
• [PATCH 2/7] input: misc: ixp4-beeper: switch to use gpiolib   Linus Walleij
• [PATCH 3/7 v2] input: misc: ixp4-beeper: use gpiolib strictly   Linus Walleij
• [PATCH 3/7] misc: ixp4-beeper: use gpiolib strictly   Linus Walleij
• [PATCH 4/7] ptp: switch to use gpiolib   Linus Walleij
• [PATCH 1/7 v2] ARM: ixp4xx: convert remaining users to use gpiolib   Linus Walleij
• [PATCH 2/8 v3] ARM: iop32x: request and issue reset using gpio   Linus Walleij
• [PATCH 0/6] deletion of the Shark machine   Linus Walleij
• [PATCH 1/6] ARM: delete mach-shark   Linus Walleij
• [PATCH 2/6] MAINTAINERS: delete Shark machine entry   Linus Walleij
• [PATCH 3/6] block: drop dependency on ARCH_SHARK   Linus Walleij
• [PATCH 4/6] ide: drop dependency on ARCH_SHARK   Linus Walleij
• [PATCH 5/6] input: i8042: drop dependency on ARCH_SHARK   Linus Walleij
• [PATCH 6/6] video: drop code for ARCH_SHARK in cyber2000fb   Linus Walleij
• [PATCH 063/228] cpufreq: dbx500: Use generic cpufreq routines   Linus Walleij
• [PATCH 099/228] cpufreq: dbx500: don't initialize part of policy that is set by core too   Linus Walleij
• [PATCH] ARM: nomadik: delete FSMC platform data   Linus Walleij
• [PATCH] clk: nomadik: set all timers to use 2.4 MHz TIMCLK   Linus Walleij
• [PATCH] ARM: tegra: throw the unique chip ID into the entropy pool   Linus Walleij
• [PATCH] ARM: tegra: add fuses as device randomness   Linus Walleij
• [PATCH] ARM: ux500: disable outer cache debug   Linus Walleij
• [PATCH] ARM: multi_v7: add HREFv60 to multi_v7 defconfig   Linus Walleij
• [PATCH] ARM: multi_v7: add HREFv60 to multi_v7 defconfig   Linus Walleij
• [PATCH] ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT   Linus Walleij
• [RFC PATCH 1/4] DRIVERS: IRQCHIP: Add crossbar irqchip driver   Linus Walleij
• [RFC][PATCH] rtc: rtc-pl031: Set wakeup flag prior to registering rtcdev   Linus Walleij
• [PATCH 01/41] mfd: dbx500-prcmu: Correctly reorder PRCMU clock identifiers   Linus Walleij
• [PATCH 02/41] mfd: dbx500-prcmu: Move PRCMU numerical clock identifiers into DT include file   Linus Walleij
• [PATCH] ARM: u300: hide submenus   Linus Walleij
• [PATCH v9 1/3] gpio: bcm281xx: Add GPIO driver   Linus Walleij
• [PATCH v9 2/3] ARM: bcm281xx: Enable GPIO driver   Linus Walleij
• [PATCH/RESEND 1/2] gpio: rcar: Remove #gpio-range-cells DT property usage   Linus Walleij
• [PATCH 189/228] cpufreq: dbx500: remove calls to cpufreq_notify_transition()   Linus Walleij
• [PATCH 5/7] staging: media/lirc: switch to use gpiolib   Linus Walleij
• [PATCH 5/7] staging: media/lirc: switch to use gpiolib   Linus Walleij
• [PATCH 0/8] IOP GPIO refactoring   Linus Walleij
• [PATCH 0/8] IOP GPIO refactoring take 2   Linus Walleij
• [PATCH 1/8] ARM: plat-iop: move the GPIO driver to drivers/gpio   Linus Walleij
• [PATCH 2/8] ARM: iop32x: request and issue reset using gpio   Linus Walleij
• [PATCH 3/8] ARM: iop32x: read N2100 power key using gpiolib   Linus Walleij
• [PATCH 4/8] gpio: decouple the IOP GPIO driver from platform   Linus Walleij
• [PATCH 5/8] ARM: plat-iop: remove custom complex GPIO implementation   Linus Walleij
• [PATCH 6/8] ARM: plat-iop: instantiate GPIO from platform device   Linus Walleij
• [PATCH 7/8] gpio: iop: use readl/writel accessors   Linus Walleij
• [PATCH 8/8] ARM: plat-iop: pass physical base for GPIO   Linus Walleij
• [PATCH 30/41] usb: musb: ux500: Don't supply a con_id when requesting the clock   Linus Walleij
• [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init   Linus Walleij
• [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init   Linus Walleij
• [PATCH 02/26] clk: nomadik: move src init out of nomadik_clk_init   Linus Walleij
• [PATCH 03/26] clk: nomadik: declare OF clock provider   Linus Walleij
• [PATCH 17/26] ARM: nomadik: remove custom .init_time hook   Linus Walleij
• [PATCH 22/41] clk: ux500: Copy u8500_clk_init() ready for DT enablement   Linus Walleij
• [PATCH 0/8] IOP GPIO refactoring take 2   Linus Walleij
• [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init   Linus Walleij
• [PATCH 01/26] ARM: nomadik: move mtu setup to clocksource init   Linus Walleij
• [PATCH v3 1/7] pinctrl: imx1 core driver   Linus Walleij
• [PATCH v6] gpio: pcf857x: Add OF support   Linus Walleij
• [PATCH] ARM: sa1100: remove complex GPIO interface   Linus Walleij
• [PATCH] ARM: sa1100: remove complex GPIO interface   Linus Walleij
• [PATCH v2] ARM: sa1100: remove complex GPIO interface   Linus Walleij
• [GIT PULL] Nomadik AUXDATA removal   Linus Walleij
• [GIT PULL] ux500 fixes for v3.12   Linus Walleij
• [GIT PULL] ux500 device tree changes for v3.13 take 1   Linus Walleij
• [GIT PULL] delete the Shark machine for v3.13   Linus Walleij
• [PATCH] arm: mach-integrator: Add stub for pci_v3_early_init() for !CONFIG_PCI   Linus Walleij
• [PATCH 1/2] ARM: mmp: delete the custom GPIO header   Linus Walleij
• [PATCH 2/2] ARM: pxa: delete the custom GPIO header   Linus Walleij
• [PATCH] ARM: ux500: delete devices-common remnants   Linus Walleij
• [GIT PULL] ux500 device tree changes for v3.13 take 1   Linus Walleij
• [GIT PULL] ux500 device tree changes for v3.13 take 2   Linus Walleij
• [PATCH] clk: nomadik: set all timers to use 2.4 MHz TIMCLK   Linus Walleij
• device tree binding documentation outdated   Linus Walleij
• [RFC PATCH 1/4] pinctrl: at91: fix typos   Linus Walleij
• [RFC PATCH 2/4] pinctrl: at91: fix sam9x5 debounce/deglitch functions   Linus Walleij
• [PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string   Linus Walleij
• [PATCH] ARM: drop explicit selection of HAVE_CLK and CLKDEV_LOOKUP   Linus Walleij
• device tree binding documentation outdated   Linus Walleij
• [PATCH] pinctrl: Correct number of pins for s5pv210   Linus Walleij
• [PATCH] ARM: ux500: cpuidle: fix section mismatch   Linus Walleij
• [PATCH] ARM: h3600: update defconfig   Linus Walleij
• OMAP baseline test results for v3.11   Paul Walmsley
• Tegra baseline test results for v3.11   Paul Walmsley
• [PATCH v2] ARM: omap2: throw the die id into the entropy pool   Paul Walmsley
• [PATCH v2] ARM: omap2: throw the die id into the entropy pool   Paul Walmsley
• Tegra baseline test results for v3.12-rc1   Paul Walmsley
• OMAP baseline test results for v3.12-rc1   Paul Walmsley
• Tegra baseline test results for v3.12-rc1   Paul Walmsley
• Tegra baseline test results for v3.12-rc2   Paul Walmsley
• OMAP baseline test results for v3.12-rc2   Paul Walmsley
• OMAP baseline test results for v3.12-rc3   Paul Walmsley
• OMAP baseline test results for v3.12-rc3   Paul Walmsley
• [PATCH v4 01/11] ARM: OMAP2+: CM: cm_inst offset s16->u16   Paul Walmsley
• [PATCH v4 07/11] ARM: OMAP2+: CM: AM43x clockdomain data   Paul Walmsley
• [PATCH v4 07/11] ARM: OMAP2+: CM: AM43x clockdomain data   Paul Walmsley
• [PATCH v4 06/11] ARM: OMAP2+: PM: AM43x powerdomain data   Paul Walmsley
• [PATCH v4 07/11] ARM: OMAP2+: CM: AM43x clockdomain data   Paul Walmsley
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   Ricard Wanderlof
• [PATCH] clk: tegra: replace enum tegra114_clk by binding header   Stephen Warren
• [PATCH 2/4] clk: tegra: convert Tegra114 gate clocks to table   Stephen Warren
• [PATCH 0/4] Introduce table driven initializations   Stephen Warren
• [PATCH v4 1/5] ARM: add basic Trusted Foundations support   Stephen Warren
• [PATCH v4 1/5] ARM: add basic Trusted Foundations support   Stephen Warren
• [PATCH v4 0/5] ARM: tegra: support for Trusted Foundations   Stephen Warren
• [alsa-devel] [PATCH 2/3] ASoC: generic simple sound card DT bindings   Stephen Warren
• [alsa-devel] [PATCH 2/3] ASoC: generic simple sound card DT bindings   Stephen Warren
• [PATCH v4 0/5] ARM: tegra: support for Trusted Foundations   Stephen Warren
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Stephen Warren
• [PATCH v2 0/4] Introduce table driven initializations   Stephen Warren
• [PATCH] ARM: tegra: throw the unique chip ID into the entropy pool   Stephen Warren
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Stephen Warren
• [PATCH v4 3/5] clk: dt: binding for basic multiplexer clock   Stephen Warren
• [PATCH] ARM: tegra: throw the unique chip ID into the entropy pool   Stephen Warren
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Stephen Warren
• [PATCH v5 1/5] ARM: add basic Trusted Foundations support   Stephen Warren
• [PATCH] crypto: tegra: use kernel entropy instead of ad-hoc   Stephen Warren
• [PATCH v2] pwm: pxa: add device tree support to pwm driver   Stephen Warren
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Stephen Warren
• [PATCH 3/3] arm: dts: socfpga: Add support for SD/MMC   Stephen Warren
• [RESEND PATCH v2] pwm: pxa: add device tree support to pwm driver   Stephen Warren
• [PATCHv3 1/2] ARM: msm: Add support for APQ8074 Dragonboard   Stephen Warren
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   Stephen Warren
• [RESEND PATCH v2] pwm: pxa: add device tree support to pwm driver   Stephen Warren
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH v9 1/3] gpio: bcm281xx: Add GPIO driver   Stephen Warren
• [PATCH v9 1/3] gpio: bcm281xx: Add GPIO driver   Stephen Warren
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH 1/2] cpufreq: tegra: Remove not used header and clean up codes   Stephen Warren
• [PATCH 2/2] cpufreq: tegra: Re-model Tegra cpufreq driver   Stephen Warren
• [PATCH RFC v2 13/16] ARM: tegra: split tegra_pmc_init() in two   Stephen Warren
• [PATCH v2 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH] RFC: interrupt consistency check for OF GPIO IRQs   Stephen Warren
• [PATCH RFC v2 13/16] ARM: tegra: split tegra_pmc_init() in two   Stephen Warren
• [PATCH 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH] crypto: tegra: use kernel entropy instead of ad-hoc   Stephen Warren
• [PATCH] ARM: tegra: throw the unique chip ID into the entropy pool   Stephen Warren
• [PATCH 0/7] ARM: tegra: various misc cleanups   Stephen Warren
• [PATCH 1/7] ARM: tegra: remove common.c   Stephen Warren
• [PATCH 2/7] ARM: tegra: delete stale header content   Stephen Warren
• [PATCH 3/7] ARM: tegra: delete gpio-names.h   Stephen Warren
• [PATCH 4/7] ARM: tegra: move resume vector define to irammap.h   Stephen Warren
• [PATCH 5/7] ARM: tegra: remove much of iomap.h   Stephen Warren
• [PATCH 6/7] ARM: tegra: remove tegra_chip_uid()   Stephen Warren
• [PATCH 7/7] ARM: tegra: make tegra_init_fuse() __init   Stephen Warren
• [PATCH] ARM: tegra: add fuses as device randomness   Stephen Warren
• [PATCH] ARM: tegra: enable CPU_FREQ_STAT_DETAILS   Stephen Warren
• [PATCH v2 3/4] cpufreq: tegra: Re-model Tegra cpufreq driver   Stephen Warren
• [PATCHv4 4/4] Documentation: Add device tree bindings for Freescale FTM PWM.   Stephen Warren
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   Stephen Warren
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Stephen Warren
• [PATCH 211/228] cpufreq: tegra: remove calls to cpufreq_notify_transition()   Stephen Warren
• [PATCH] crypto: tegra: use kernel entropy instead of ad-hoc   Stephen Warren
• [PATCH] ARM: tegra: remove tegra_chip_uid()   Stephen Warren
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Stephen Warren
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Stephen Warren
• [PATCH 3/3] arm: dts: socfpga: Add support for SD/MMC   Stephen Warren
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   Stephen Warren
• [PATCH v6 1/5] ARM: add basic support for Trusted Foundations   Stephen Warren
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Stephen Warren
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   Stephen Warren
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Stephen Warren
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Stephen Warren
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Stephen Warren
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Stephen Warren
• [PATCH] MAINTAINERS: Tegra updates, and driver ownership   Stephen Warren
• [PATCH] clk: si570: Add a driver for SI570 oscillators   Stephen Warren
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Stephen Warren
• [PATCH v3] PWM: PXA: add device tree support to PWM driver   Stephen Warren
• [PATCH] ARM: tegra: split tegra_pmc_init() in two   Stephen Warren
• [PATCH 0/7] ARM: tegra: various misc cleanups   Stephen Warren
• [PATCH] ARM: tegra: add fuses as device randomness   Stephen Warren
• [PATCH] ARM: tegra: enable CPU_FREQ_STAT_DETAILS   Stephen Warren
• [GIT PULL] ARM: tegra: dependencies for ARM .init_time cleanup   Stephen Warren
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH REPOST] ARM: tegra: use dt-binding header for key code   Stephen Warren
• [PATCH 10/26] ARM: bcm2835: remove custom .init_time hook   Stephen Warren
• [PATCH 24/26] ARM: tegra: remove custom .init_time hook   Stephen Warren
• [PATCH 00/26] ARM: provide common arch init for DT clocks   Stephen Warren
• [PATCH] MAINTAINERS: Tegra updates, and driver ownership   Stephen Warren
• [PATCH 1/2] ARM: tegra: enable PALMAS_PINCTRL config   Stephen Warren
• [PATCH V2 2/2] ARM: tegra: add palmas pincontrol to Dalmore device tree   Stephen Warren
• [PATCH REPOST] ARM: tegra: use dt-binding header for key code   Stephen Warren
• [PATCH] ARM: tegra_defconfig: enable CONFIG_ARM_APPENDED_DTB   Stephen Warren
• [PATCH] ARM: tegra_defconfig: enable CONFIG_ARM_APPENDED_DTB   Stephen Warren
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [PATCH 01/12] clk: tegra: simplify periph clock data   Stephen Warren
• [PATCH 03/12] clk: tegra: Add TEGRA_PERIPH_NO_DIV flag   Stephen Warren
• [PATCH 05/12] clk: tegra: add header for common tegra clock IDs   Stephen Warren
• [PATCH 06/12] clk: tegra: add common infra for DT clocks   Stephen Warren
• [PATCH 07/12] clk: tegra: move audio clk to common file   Stephen Warren
• [PATCH 08/12] clk: tegra: move periph clocks to common file   Stephen Warren
• [PATCH 10/12] clk: tegra: move fixed clocks to common file   Stephen Warren
• [PATCH 12/12] clk: tegra: introduce common gen4 super clock   Stephen Warren
• [PATCH v3 1/2] video: ARM CLCD: Add DT support   Stephen Warren
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Stephen Warren
• [PATCH 1/4] i2c: busses: i2c-st: Add ST I2C controller   Stephen Warren
• [PATCH 1/4] i2c: busses: i2c-st: Add ST I2C controller   Stephen Warren
• [PATCH] ASoC: generic: Add generic DT based simple codec   Stephen Warren
• [PATCH] media: i2c: adv7343: fix the DT binding properties   Stephen Warren
• [PATCH] irq: bcm2835: Re-implement the hardware IRQ handler.   Stephen Warren
• [PATCH 08/12] clk: tegra: move periph clocks to common file   Stephen Warren
• [PATCH 10/12] clk: tegra: move fixed clocks to common file   Stephen Warren
• [RFCv2 3/3] ARM: dts: N900: Add SSI information   Stephen Warren
• [PATCH] ASoC: generic: Add generic DT based simple codec   Stephen Warren
• [PATCH 1/2] dts: socfpga: Add ethernet support on Altera's SOCFPGA platform   Stephen Warren
• [PATCH] ASoC: generic: Add generic DT based simple codec   Stephen Warren
• dev->of_node overwrite can cause device loading with different driver   Lothar Waßmann
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Lothar Waßmann
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Lothar Waßmann
• [PATCHv5] staging/iio/adc: change the MXS touchscreen driver implementation   Lothar Waßmann
• [PATCH 1/9] Staging/iio/adc/touchscreen/MXS: add proper clock handling   Lothar Waßmann
• [PATCH 3/3] ARM: mxs: dts: Enable DCP for MXS   Lothar Waßmann
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Lothar Waßmann
• [PATCH 2/3] ARM: mxs: crypto: Add Freescale MXS DCP driver   Lothar Waßmann
• imprecise external abort using the flexcan driver on i.MX6Q   Lothar Waßmann
• imprecise external abort using the flexcan driver on i.MX6Q   Lothar Waßmann
• imprecise external abort using the flexcan driver on i.MX6Q   Lothar Waßmann
• imprecise external abort using the flexcan driver on i.MX6Q   Lothar Waßmann
• imprecise external abort using the flexcan driver on i.MX6Q   Lothar Waßmann
• imprecise external abort using the flexcan driver on i.MX6Q   Lothar Waßmann
• imprecise external abort using the flexcan driver on i.MX6Q   Lothar Waßmann
• imprecise external abort using the flexcan driver on i.MX6Q   Lothar Waßmann
• [PATCH v2 1/3] dma: mxs-dma: Cleanup interrupt handler   Lothar Waßmann
• [PATCH] ARM: LLVMLinux: Change "extern inline" to "gnu_inline" in ARM ftrace.h   Behan Webster
• [PATCH 1/5] arm: LLVMLinux: Add current_stack_pointer macro for ARM   Behan Webster
• [PATCH 1/5] arm: LLVMLinux: Add current_stack_pointer macro for ARM   Behan Webster
• [PATCH 2/5] arm: LLVMLinux: use current_stack_pointer for percpu   Behan Webster
• [PATCH 2/5] arm: LLVMLinux: use current_stack_pointer for percpu   Behan Webster
• [PATCH] arm: LLVMLinux: Calculate pt_regs address from fp   Behan Webster
• Build error in torvalds kernel 3.11 for omap2plus   Frederic Weisbecker
• [PATCH] arm: Fix build error with context tracking calls   Frederic Weisbecker
• [PATCH] arm: Fix build error with context tracking calls   Frederic Weisbecker
• [PATCH] arm: Fix build error with context tracking calls   Frederic Weisbecker
• [PATCH] arm: Fix build error with context tracking calls   Frederic Weisbecker
• [PATCH 0/3] nohz full: drop 64-bit requirement, enable ARM support v2   Frederic Weisbecker
• [PATCH 1/3] vtime: Add HAVE_VIRT_CPU_ACCOUNTING_GEN Kconfig   Frederic Weisbecker
• [PATCH 2/3] nohz: Drop generic vtime obsolete dependency on CONFIG_64BIT   Frederic Weisbecker
• [PATCH 3/3] ARM: Kconfig: allow full nohz CPU accounting   Frederic Weisbecker
• [PATCH RESEND 0/2] runtime PM support for I2C clients   Mika Westerberg
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Mika Westerberg
• [PATCH RESEND 2/2] i2c: attach/detach I2C client device to the ACPI power domain   Mika Westerberg
• [PATCH v2 0/9] runtime PM support for I2C and SPI client devices   Mika Westerberg
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Mika Westerberg
• [PATCH v2 2/9] i2c: attach/detach I2C client device to the ACPI power domain   Mika Westerberg
• [PATCH v2 3/9] Input: misc - convert existing I2C client drivers to use I2C core runtime PM   Mika Westerberg
• [PATCH v2 4/9] [media] s5p-tv: convert to use I2C core runtime PM   Mika Westerberg
• [PATCH v2 5/9] drivers/misc: convert existing I2C clients driver to use I2C core runtime PM   Mika Westerberg
• [PATCH v2 6/9] mfd: wm8994: convert to use I2C core runtime PM   Mika Westerberg
• [PATCH v2 7/9] ASoC: codecs: convert existing I2C client drivers to use I2C core runtime PM   Mika Westerberg
• [PATCH v2 8/9] spi: prepare runtime PM support for SPI devices   Mika Westerberg
• [PATCH v2 9/9] spi: attach/detach SPI device to the ACPI power domain   Mika Westerberg
• [PATCH v3] runtime PM support for I2C adapter devices   Mika Westerberg
• [PATCH v3] i2c: enable runtime PM for I2C adapter devices enumerated from ACPI   Mika Westerberg
• [PATCH v5 12/13] swiotlb-xen: use xen_alloc/free_coherent_pages   Konrad Rzeszutek Wilk
• [PATCH v5 05/13] xen/arm,arm64: move Xen initialization earlier   Konrad Rzeszutek Wilk
• [PATCH v6 03/19] xen: introduce XENMEM_exchange_and_pin and XENMEM_unpin   Konrad Rzeszutek Wilk
• [PATCH v6 06/19] xen/arm,arm64: enable SWIOTLB_XEN   Konrad Rzeszutek Wilk
• [PATCH v6 08/19] arm/xen: get_dma_ops: return xen_dma_ops if we are running on Xen   Konrad Rzeszutek Wilk
• [PATCH v6 10/19] xen: introduce xen_alloc/free_coherent_pages   Konrad Rzeszutek Wilk
• [PATCH v6 11/19] swiotlb-xen: use xen_alloc/free_coherent_pages   Konrad Rzeszutek Wilk
• [PATCH v6 12/19] swiotlb: don't assume that io_tlb_start-io_tlb_end is coherent   Konrad Rzeszutek Wilk
• [PATCH v6 14/19] swiotlb: print a warning when the swiotlb is full   Konrad Rzeszutek Wilk
• [PATCH v6 15/19] swiotlb-xen: call dma_capable only if dev->dma_mask is allocated   Konrad Rzeszutek Wilk
• [PATCH v6 16/19] arm, arm64: do not always merge biovec if we are running on Xen   Konrad Rzeszutek Wilk
• [PATCH v6 17/19] xen: introduce XENMEM_pin   Konrad Rzeszutek Wilk
• [PATCH v6 18/19] swiotlb-xen: introduce a rbtree to track phys to bus mappings   Konrad Rzeszutek Wilk
• [PATCH v6 19/19] swiotlb-xen: instead of bouncing on the swiotlb, pin single pages   Konrad Rzeszutek Wilk
• Inte IOP Xscale updates   Dan Williams
• [PATCH] MAINTAINERS: update email for Dan Williams   Dan Williams
• [PATCH] dma: use %pa to print dma_addr_t   Dan Williams
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   David Woodhouse
• [GIT PULL 0/3] ARM: SoC: Second round of changes for v3.12   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   David Woodhouse
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Woodhouse, David
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Woodhouse, David
• [GIT PULL] ARM: SoC fixes for 3.12-rc   Woodhouse, David
• [Resend with ACK][PATCH] mm/arch: use NUMA_NODE   Jianguo Wu
• [Resend with ACK][PATCH] mm/arch: use NUMA_NO_NODE   Jianguo Wu
• [PATCH] mtd: atmel_nand: fix the warning when CONFIG_OF is not defined   Josh Wu
• [PATCH] mtd: atmel_nand: fix the warning when CONFIG_OF is not defined   Josh Wu
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Josh Wu
• [PATCH 2/2] mtd: atmel_nand: add MODULE_DEVICE_TABLE for nfc driver   Josh Wu
• [PATCH 1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF   Josh Wu
• [resend][PATCH v3 6/6] iio: at91: introduce touch screen support in iio adc driver   Josh Wu
• [PATCH v2] mtd: atmel_nand: use the common function to get ecc info   Josh Wu
• [PATCH v2 1/2] mtd: atmel_nand: remove #if defined(CONFIG_OF) around OF-specific code   Josh Wu
• [PATCH v2 2/2] mtd: atmel_nand: add MODULE_DEVICE_TABLE for nfc driver   Josh Wu
• [PATCH v3] mtd: atmel_nand: use minimum ecc requirements of nand: ecc_{strength, step}_ds   Josh Wu
• [PATCH v3] mtd: atmel_nand: use minimum ecc requirements of nand: ecc_{strength,step}_ds   Josh Wu
• [PATCH 1/2] ARM: EXYNOS: convert cpuidle driver to be a platform driver   Rafael J. Wysocki
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Rafael J. Wysocki
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Rafael J. Wysocki
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Rafael J. Wysocki
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Rafael J. Wysocki
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Rafael J. Wysocki
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Rafael J. Wysocki
• [PATCH 0/4] cpufreq: fixes for v3.12   Rafael J. Wysocki
• [PATCH RESEND 1/2] i2c: prepare runtime PM support for I2C client devices   Rafael J. Wysocki
• [PATCH 1/4] cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device   Rafael J. Wysocki
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Rafael J. Wysocki
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Rafael J. Wysocki
• [PATCH 0/4] cpufreq: fixes for v3.12   Rafael J. Wysocki
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Rafael J. Wysocki
• "cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too   Rafael J. Wysocki
• [PATCH v2 8/9] spi: prepare runtime PM support for SPI devices   Rafael J. Wysocki
• [PATCH 211/228] cpufreq: tegra: remove calls to cpufreq_notify_transition()   Rafael J. Wysocki
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Rafael J. Wysocki
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Rafael J. Wysocki
• [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices   Rafael J. Wysocki
• [PATCH v3] i2c: enable runtime PM for I2C adapter devices enumerated from ACPI   Rafael J. Wysocki
• [PATCH v3] i2c: enable runtime PM for I2C adapter devices enumerated from ACPI   Rafael J. Wysocki
• [PATCH RESEND] ARM: pxa: ssp: remove kfree for memory allocated with devm_kzalloc   Chao Xie
• [Question] Verification For arm64: suspend/resume implementation   Leo Yan
• [Question] Verification For arm64: suspend/resume implementation   Leo Yan
• [Question] Verification For arm64: suspend/resume implementation   Leo Yan
• [Question] Verification For arm64: suspend/resume implementation   Leo Yan
• [Question] Verification For arm64: suspend/resume implementation   Leo Yan
• [Question] Verification For arm64: suspend/resume implementation   Leo Yan
• [PATCH v2] [media] marvell-ccic: simplify and fix clk handling (a bit)   Libin Yang
• [PATCH v2] [media] marvell-ccic: simplify and fix clk handling (a bit)   Libin Yang
• [PATCH v2] [media] marvell-ccic: simplify and fix clk handling (a bit)   Libin Yang
• [PATCH] drm/exynos: fix return value check in lowlevel_buffer_allocate()   Wei Yongjun
• [PATCH RESEND] ARM: pxa: ssp: remove kfree for memory allocated with devm_kzalloc   Wei Yongjun
• [PATCH] PCI: exynos: missing clk_disable_unprepare() on error in exynos_pcie_probe()   Wei Yongjun
• [PATCH RFC 0/6] ARM: OMAP2+: AM43x/AM335x prcm reset driver   Philipp Zabel
• [PATCH RFC 0/6] ARM: OMAP2+: AM43x/AM335x prcm reset driver   Philipp Zabel
• [PATCH 1/2] ARM: dts: imx53-qsb: add TVE entry   Philipp Zabel
• [PATCH 1/2] Documentation: Add device tree bindings for i.MX TVE   Philipp Zabel
• [PATCH 2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree   Philipp Zabel
• [PATCH 2/2] ARM i.MX53: dts: Add TVE to i.MX53-QSB device tree   Philipp Zabel
• [Question] Verification For arm64: suspend/resume implementation   Jisheng Zhang
• [PATCH] ARM: pxa: use spinlock for dma channels   Neil Zhang
• [PATCH v1 0/1] ahci: imx: setup power saving methods   Richard Zhu
• [PATCH] video: mmp: drop needless devm cleanup   Zhou Zhu
• [PATCH v4 5/5] clk: dt: binding for basic gate clock   Haojian Zhuang
• [PATCH 1/2] ARM: mmp: delete the custom GPIO header   Haojian Zhuang
• [PATCH 0/3] perf: parse the dwarf backtrace info from .debug_frame section   Peter Zijlstra
• [PATCH 2/2] ARM: EXYNOS: add cpuidle-exynos.max_states kernel parameter   Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ARM: EXYNOS: add cpuidle-exynos.max_states kernel parameter   Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ARM: EXYNOS: add cpuidle-exynos.max_states kernel parameter   Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ARM: EXYNOS: add cpuidle-exynos.max_states kernel parameter   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4, 5]_DT config options   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: EXYNOS: remove CONFIG_MACH_EXYNOS[4,5]_DT config options   Bartlomiej Zolnierkiewicz
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: EXYNOS: fix PL330 MDMA1 address in DT for Universal C210 board   Bartlomiej Zolnierkiewicz
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: EXYNOS: fix PL330 MDMA1 address in DT for Universal C210 board   Bartlomiej Zolnierkiewicz
• [PATCH v5 1/4] media: s5p-tv: Replace mxr_ macro by default dev_   Bartlomiej Zolnierkiewicz
• [RFC PATCH 08/15] ata: ahci_platform: Manage SATA PHY   Bartlomiej Zolnierkiewicz
• [RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver   Bartlomiej Zolnierkiewicz
• [RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver   Bartlomiej Zolnierkiewicz
• [RFC 3/3] Samsung: DT: Add Device tree for S5PC110/S5PV210 Boards   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: at91: cam60: fix incorrect placement of __initdata tag   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: ks8695: fix incorrect placement of __initdata tag   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: omap1: fix incorrect placement of __initdata tag   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag   Bartlomiej Zolnierkiewicz
• [PATCH v2] ARM: shmobile: ape6evm: fix incorrect placement of __initdata tag   Bartlomiej Zolnierkiewicz
• [PATCH v2] ARM: at91: cam60: fix incorrect placement of __initdata tag   Bartlomiej Zolnierkiewicz
• [RFC PATCH 0/3] Target CPU=Host implementation for KVM ARM/ARM64   Marc Zyngier
• [RFC PATCH] arm64: KVM: honor cacheability attributes on S2 page fault   Marc Zyngier
• [RFC PATCH] arm64: KVM: honor cacheability attributes on S2 page fault   Marc Zyngier
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   Marc Zyngier
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   Marc Zyngier
• [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8   Marc Zyngier
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   Marc Zyngier
• [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8   Marc Zyngier
• [PATCH 1/3] arm: kvm: clamp NR_VCPUS to MAX_VCPUS   Marc Zyngier
• [PATCH 2/3] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Marc Zyngier
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   Marc Zyngier
• [PATCH 2/3] arm32: kvm: rename CONFIG_KVM_ARM_MAX_VCPUS   Marc Zyngier
• [PATCH v3 2/4] ARM64: KVM: Implement kvm_vcpu_preferred_target() function   Marc Zyngier
• [PATCH v3 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Marc Zyngier
• [PATCH] ARM: dts: Update arch timer node with clock frequency   Marc Zyngier
• [PATCH] ARM: dts: Update arch timer node with clock frequency   Marc Zyngier
• [PATCH 3/3] KVM: ARM: Transparent huge pages and hugetlbfs support   Marc Zyngier
• [PATCH 3/3] KVM: ARM: Transparent huge pages and hugetlbfs support   Marc Zyngier
• [PATCH v3 1/4] ARM: KVM: Implement kvm_vcpu_preferred_target() function   Marc Zyngier
• [PATCH 8/8] KVM: arm-vgic: Support CPU interface reg access   Marc Zyngier
• [PATCH 3/3] KVM: ARM: Add support for Cortex-A7   Marc Zyngier
• [PATCH 1/1] arm64: X-Gene AHBC platform bus driver   Marc Zyngier
• [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Marc Zyngier
• [RFC PATCH 1/6] DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs   Marc Zyngier
• [PATCH 1/3] arm: socfpga: Set the SDMMC clock phase in system manager   dinguyen at altera.com
• [PATCH 2/3] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific functionality   dinguyen at altera.com
• [PATCH 3/3] arm: dts: socfpga: Add support for SD/MMC   dinguyen at altera.com
• [PATCH] dts: Fix misspelling of Synopsys   dinguyen at altera.com
• [PATCH] arm: socfpga: Enable ARM_TWD for socfpga   dinguyen at altera.com
• [PATCH] arm: socfpga: Fix incorrect sdmmc clock name   dinguyen at altera.com
• [PATCH 1/2] arm: dts: socfpga: Change some types of gate-clk type to periph-clk type   dinguyen at altera.com
• [PATCH 2/2] arm: socfpga: Remove check for "reg" property in socfpga_clk_init   dinguyen at altera.com
• [PATCH 1/2] arm: socfpga: Add clock for smp_twd timer   dinguyen at altera.com
• [PATCH 2/2] arm: socfpga: Remove socfpga_init_clocks   dinguyen at altera.com
• [PATCHv4 1/2] clocksource: dw_apb_timer: Move timer defines to header file.   dinguyen at altera.com
• [PATCHv4 2/2] clocksource: dw_apb_timer_of: Fix read_sched_clock   dinguyen at altera.com
• [PATCHv2 1/3] arm: socfpga: Set the SDMMC clock phase in system manager   dinguyen at altera.com
• [PATCHv2 2/3] mmc: dw_mmc-socfpga: Clean up SOCFPGA platform specific functionality   dinguyen at altera.com
• [PATCHv2 3/3] arm: dts: socfpga: Add support for SD/MMC   dinguyen at altera.com
• [PATCH 1/2] dts: socfpga: Add ethernet support on Altera's SOCFPGA platform   dinguyen at altera.com
• [PATCH 2/2] arm: socfpga: Add platform initialization for ethernet   dinguyen at altera.com
• [PATCH] dts: socfpga: Add support for Altera's SOCFPGA Arria V board   dinguyen at altera.com
• [PATCH] mmc: atmel-mci: abort transfer on timeout error   ludovic.desroches at atmel.com
• [PATCH] mmc: atmel-mci: fix oops in atmci_tasklet_func   ludovic.desroches at atmel.com
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   boris brezillon
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   boris brezillon
• [RFC PATCH alt 4/4] pinctrl: at91: rework debounce configuration   boris brezillon
• [PATCH 0/2] pwm: atmel-tcb: config fixes   boris brezillon
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   yves at cheny.fr
• [PATCH] net: mvneta: properly disable HW PHY polling and ensure adjust_link() works   yves at cheny.fr
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   cini
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   cini
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   cini
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   cini
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   cini
• [PATCH ] ARM: sunxi: Add Emac,SMP and Arch_timer support for sunxi A20;Add phy cnt arch timer for ARMv7 support.   cini
• [PATCH 0/4] Add smp support for Allwinner A20 and phy arch count timer   cinifr
• [PATCH 1/4] Add smp support for Allwinner A20(sunxi 7i).   cinifr
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   cinifr
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   cinifr
• [linux-sunxi] Re: [PATCH 4/4] Add arch count timer node in dts for Allwinner A20(sunxi 7i).   cinifr
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   cinifr
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   cinifr
• [PATCH 0/4] Add smp support for Allwinner A20 and phy arch count timer   cinifr
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   cinifr
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   cinifr
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   cinifr
• [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   cinifr
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   cinifr
• [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   cinifr
• [PATCH V3: Add Smp support for Allwinner A20. 1/3] Add smp support for Allwinner A20(sunxi 7i).   cinifr
• [PATCH V2] arm: LLVMLinux: use static inline in ARM ftrace.h   behanw at converseincode.com
• [PATCH 0/5] arm: LLVMLinux: Add current_stack_pointer   behanw at converseincode.com
• [PATCH 1/5] arm: LLVMLinux: Add current_stack_pointer macro for ARM   behanw at converseincode.com
• [PATCH 2/5] arm: LLVMLinux: use current_stack_pointer for percpu   behanw at converseincode.com
• [PATCH 3/5] arm: LLVMLinux: Use current_stack_pointer for return_address   behanw at converseincode.com
• [PATCH 4/5] arm: LLVMLinux: Use current_stack_pointer in save_stack_trace_tsk   behanw at converseincode.com
• [PATCH 5/5] arm: LLVMLinux: Use current_stack_pointer in unwind_backtrace   behanw at converseincode.com
• [PATCH] arm: LLVMLinux: Use __builtin_frame_address instead of named registers   behanw at converseincode.com
• [PATCH] arm: LLVMLinux: Calculate pt_regs address from fp   behanw at converseincode.com
• [PATCH] arm: LLVMLinux: Use __builtin_frame_address to get thread info   behanw at converseincode.com
• [PATCH] arm: LLVMLinux: Calculate current_thread_info from fp   behanw at converseincode.com
• Corrupted registers in return from system call 2.6.31   dagriego
• [PATCH 3/4] Add physical count arch timer support for clocksource in ARMv7.   maxime.ripard at free-electrons.com
• [PATCH 1/3] Add smp support for Allwinner A20(sunxi 7i).   maxime.ripard at free-electrons.com
• getting rid of subsys_initcall usage? (was: Re: [PATCH RESEND] i2c: designware: use module_platform_driver)   zhangfei gao
• [RFC PATCH 0/2] Aarch64: KGDB: kernel debugging support   vijay.kilari at gmail.com
• [RFC PATCH 1/2] Aarch64: KGDB: Add Basic KGDB support   vijay.kilari at gmail.com
• [RFC PATCH 2/2] Aarch64: KGDB: Add Step debugging support   vijay.kilari at gmail.com
• [PATCH v2 0/3] AArch64: KGDB support   vijay.kilari at gmail.com
• [PATCH v2 1/3] AArch64: Add single-step and breakpoint handler hooks   vijay.kilari at gmail.com
• [PATCH v2 2/3] AArch64: KGDB: Add Basic KGDB support   vijay.kilari at gmail.com
• [PATCH v2 3/3] AArch64: KGDB: Add step debugging support   vijay.kilari at gmail.com
• [PATCH v3 0/8] Add the Quadspi driver for vf610-twr   thomas.langer at lantiq.com
• Vexpress config   melwyn lobo
• Vexpress config   melwyn lobo
• Vexpress config   melwyn lobo
• Vexpress config   melwyn lobo
• [PATCH] *** add support of GCC 4.7 for gcov ***   jiada_wang at mentor.com
• [PATCH] gcov: add support to GCC 4.7   jiada_wang at mentor.com
• [PATCH] ARM: dts: omap3-beagle-xm: enable pullup for dvi on twl_gpio   robertcnelson
• [PATCHv6 0/2] ARM: sunxi: Driver for Allwinner sunxi Security ID   oliver+list at schinagl.nl
• [PATCHv6 1/2] ARM: sunxi: Initial support for Allwinner's Security ID fuses   oliver+list at schinagl.nl
• [PATCHv6 2/2] ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i   oliver+list at schinagl.nl
• [PATCHv7 0/2] ARM: sunxi: Driver for Allwinner sunxi Security ID   oliver+list at schinagl.nl
• [PATCHv7 1/2] ARM: sunxi: Initial support for Allwinner's Security ID fuses   oliver+list at schinagl.nl
• [PATCHv7 2/2] ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i   oliver+list at schinagl.nl
• new binutils needed for arm in 3.12-rc1   richard -rw- weinberger
• question about clk notifier in common clock tree   zhoujie wu
• question about clk notifier in common clock tree   zhoujie wu
• question about clk notifier in common clock tree   zhoujie wu