[PATCH 27/41] clk: ux500: Add Device Tree support for the PRCC Kernel clock

Lee Jones lee.jones at linaro.org
Wed Sep 18 08:14:24 EDT 2013


This patch enables clocks to be specified from Device Tree via phandles
to the "prcc-kernel-clock" node.

Acked-by: Mike Turquette <mturquette at linaro.org>
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/clk/ux500/u8500_of_clk.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
index dcc736a..4fcafd0 100644
--- a/drivers/clk/ux500/u8500_of_clk.c
+++ b/drivers/clk/ux500/u8500_of_clk.c
@@ -20,11 +20,14 @@
 
 static struct clk *prcmu_clk[PRCMU_NUM_CLKS];
 static struct clk *prcc_pclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
+static struct clk *prcc_kclk[(PRCC_NUM_PERIPH_CLUSTERS + 1) * PRCC_PERIPHS_PER_CLUSTER];
 
 #define PRCC_SHOW(clk, base, bit) \
 	clk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit]
 #define PRCC_PCLK_STORE(clk, base, bit)	\
 	prcc_pclk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit] = clk
+#define PRCC_KCLK_STORE(clk, base, bit)        \
+	prcc_kclk[(base * PRCC_PERIPHS_PER_CLUSTER) + bit] = clk
 
 struct clk *ux500_twocell_get(struct of_phandle_args *clkspec, void *data)
 {
@@ -428,83 +431,109 @@ void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
 	/* Periph1 */
 	clk = clk_reg_prcc_kclk("p1_uart0_kclk", "uartclk",
 			clkrst1_base, BIT(0), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 0);
 
 	clk = clk_reg_prcc_kclk("p1_uart1_kclk", "uartclk",
 			clkrst1_base, BIT(1), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 1);
 
 	clk = clk_reg_prcc_kclk("p1_i2c1_kclk", "i2cclk",
 			clkrst1_base, BIT(2), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 2);
 
 	clk = clk_reg_prcc_kclk("p1_msp0_kclk", "msp02clk",
 			clkrst1_base, BIT(3), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 3);
 
 	clk = clk_reg_prcc_kclk("p1_msp1_kclk", "msp1clk",
 			clkrst1_base, BIT(4), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 4);
 
 	clk = clk_reg_prcc_kclk("p1_sdi0_kclk", "sdmmcclk",
 			clkrst1_base, BIT(5), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 5);
 
 	clk = clk_reg_prcc_kclk("p1_i2c2_kclk", "i2cclk",
 			clkrst1_base, BIT(6), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 6);
 
 	clk = clk_reg_prcc_kclk("p1_slimbus0_kclk", "slimclk",
 			clkrst1_base, BIT(8), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 8);
 
 	clk = clk_reg_prcc_kclk("p1_i2c4_kclk", "i2cclk",
 			clkrst1_base, BIT(9), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 9);
 
 	clk = clk_reg_prcc_kclk("p1_msp3_kclk", "msp1clk",
 			clkrst1_base, BIT(10), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 1, 10);
 
 	/* Periph2 */
 	clk = clk_reg_prcc_kclk("p2_i2c3_kclk", "i2cclk",
 			clkrst2_base, BIT(0), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 0);
 
 	clk = clk_reg_prcc_kclk("p2_sdi4_kclk", "sdmmcclk",
 			clkrst2_base, BIT(2), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 2);
 
 	clk = clk_reg_prcc_kclk("p2_msp2_kclk", "msp02clk",
 			clkrst2_base, BIT(3), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 3);
 
 	clk = clk_reg_prcc_kclk("p2_sdi1_kclk", "sdmmcclk",
 			clkrst2_base, BIT(4), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 4);
 
 	clk = clk_reg_prcc_kclk("p2_sdi3_kclk", "sdmmcclk",
 			clkrst2_base, BIT(5), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 2, 5);
 
 	/* Note that rate is received from parent. */
 	clk = clk_reg_prcc_kclk("p2_ssirx_kclk", "hsirxclk",
 			clkrst2_base, BIT(6),
 			CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+	PRCC_KCLK_STORE(clk, 2, 6);
+
 	clk = clk_reg_prcc_kclk("p2_ssitx_kclk", "hsitxclk",
 			clkrst2_base, BIT(7),
 			CLK_SET_RATE_GATE|CLK_SET_RATE_PARENT);
+	PRCC_KCLK_STORE(clk, 2, 7);
 
 	/* Periph3 */
 	clk = clk_reg_prcc_kclk("p3_ssp0_kclk", "sspclk",
 			clkrst3_base, BIT(1), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 1);
 
 	clk = clk_reg_prcc_kclk("p3_ssp1_kclk", "sspclk",
 			clkrst3_base, BIT(2), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 2);
 
 	clk = clk_reg_prcc_kclk("p3_i2c0_kclk", "i2cclk",
 			clkrst3_base, BIT(3), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 3);
 
 	clk = clk_reg_prcc_kclk("p3_sdi2_kclk", "sdmmcclk",
 			clkrst3_base, BIT(4), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 4);
 
 	clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k",
 			clkrst3_base, BIT(5), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 5);
 
 	clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk",
 			clkrst3_base, BIT(6), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 6);
 
 	clk = clk_reg_prcc_kclk("p3_sdi5_kclk", "sdmmcclk",
 			clkrst3_base, BIT(7), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 3, 7);
 
 	/* Periph6 */
 	clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk",
 			clkrst6_base, BIT(0), CLK_SET_RATE_GATE);
+	PRCC_KCLK_STORE(clk, 6, 0);
 
 	for_each_child_of_node(np, child) {
 		static struct clk_onecell_data clk_data;
@@ -516,5 +545,8 @@ void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base,
 		}
 		if (!of_node_cmp(child->name, "prcc-periph-clock"))
 			of_clk_add_provider(child, ux500_twocell_get, prcc_pclk);
+
+		if (!of_node_cmp(child->name, "prcc-kernel-clock"))
+			of_clk_add_provider(child, ux500_twocell_get, prcc_kclk);
 	}
 }
-- 
1.8.1.2




More information about the linux-arm-kernel mailing list