[PATCH] phy/micrel: Add suspend/resume support to Micrel PHYs

[Nicolas Ferre]

From: Patrice Vilchez <patrice.vilchez at atmel.com>

All supported Micrel PHYs implement the standard "power down" bit 11 of BMCR,
so this patch adds support using the generic genphy_{suspend,resume} functions.

Signed-off-by: Patrice Vilchez <patrice.vilchez at atmel.com>
[b.brezillon at overkiz.com: adapt to newer kernel and generalize to other phys]
Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
[nicolas.ferre at atmel.com: commit message modification]
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: David J. Choi <david.choi at micrel.com>
---
 drivers/net/phy/micrel.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index c31aad0..3ae28f4 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -287,6 +287,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= ks8737_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8021,
@@ -300,6 +302,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8031,
@@ -313,6 +317,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8041,
@@ -326,6 +332,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8051,
@@ -339,6 +347,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8001,
@@ -351,6 +361,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8081,
@@ -363,6 +375,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8061,
@@ -375,6 +389,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ9021,
@@ -387,6 +403,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= ksz9021_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ9031,
@@ -400,6 +418,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= ksz9021_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ8873MLL,
@@ -410,6 +430,8 @@ static struct phy_driver ksphy_driver[] = {
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
 	.read_status	= ksz8873mll_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ886X,
@@ -420,6 +442,8 @@ static struct phy_driver ksphy_driver[] = {
 	.config_init	= kszphy_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE, },
 } };
 
-- 
1.8.2.2