[PATCH 5/8] ARM: plat-iop: remove custom complex GPIO implementation
Linus Walleij
linus.walleij at linaro.org
Fri Sep 20 16:17:55 EDT 2013
The kernel will now only use gpiolib to access GPIOs, so remove
the complex GPIO flag and the custom implementation.
Cc: Aaro Koskinen <aaro.koskinen at iki.fi>
Cc: Lennert Buytenhek <kernel at wantstofly.org>
Cc: Dan Williams <dan.j.williams at intel.com>
Cc: Mikael Pettersson <mikpe at it.uu.se>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
arch/arm/include/asm/hardware/iop3xx-gpio.h | 43 -----------------------------
arch/arm/include/asm/hardware/iop3xx.h | 3 --
drivers/gpio/gpio-iop.c | 9 ++----
3 files changed, 3 insertions(+), 52 deletions(-)
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index 9eda7dc..e2a0970 100644
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -28,48 +28,5 @@
#include <mach/hardware.h>
#include <asm-generic/gpio.h>
-#define __ARM_GPIOLIB_COMPLEX
-
-#define IOP3XX_N_GPIOS 8
-
-static inline int gpio_get_value(unsigned gpio)
-{
- if (gpio > IOP3XX_N_GPIOS)
- return __gpio_get_value(gpio);
-
- return gpio_line_get(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (gpio > IOP3XX_N_GPIOS) {
- __gpio_set_value(gpio, value);
- return;
- }
- gpio_line_set(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
- if (gpio < IOP3XX_N_GPIOS)
- return 0;
- else
- return __gpio_cansleep(gpio);
-}
-
-/*
- * The GPIOs are not generating any interrupt
- * Note : manuals are not clear about this
- */
-static inline int gpio_to_irq(int gpio)
-{
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
- return -EINVAL;
-}
-
#endif
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 423744b..6af9c28 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -25,9 +25,6 @@
#define IOP3XX_GPIO_LINE(x) (x)
#ifndef __ASSEMBLY__
-extern void gpio_line_config(int line, int direction);
-extern int gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
extern int init_atu;
extern int iop3xx_get_init_atu(void);
#endif
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gpio/gpio-iop.c
index d4a170d..17cc701 100644
--- a/drivers/gpio/gpio-iop.c
+++ b/drivers/gpio/gpio-iop.c
@@ -19,7 +19,7 @@
#define IOP3XX_N_GPIOS 8
-void gpio_line_config(int line, int direction)
+static void gpio_line_config(int line, int direction)
{
unsigned long flags;
@@ -31,15 +31,13 @@ void gpio_line_config(int line, int direction)
}
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_config);
-int gpio_line_get(int line)
+static int gpio_line_get(int line)
{
return !!(*IOP3XX_GPID & (1 << line));
}
-EXPORT_SYMBOL(gpio_line_get);
-void gpio_line_set(int line, int value)
+static void gpio_line_set(int line, int value)
{
unsigned long flags;
@@ -51,7 +49,6 @@ void gpio_line_set(int line, int value)
}
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_set);
static int iop3xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
--
1.8.3.1
More information about the linux-arm-kernel
mailing list