[PATCH 4/4] ARM: STi: Add I2C config to B2000 and B2020 boards
Lee Jones
lee.jones at linaro.org
Wed Sep 18 07:40:32 EDT 2013
On Wed, 18 Sep 2013, Maxime COQUELIN wrote:
> This patch supplies I2C configuration to B2000 and B2020
> based on either STiH415 or STiH416 SoCs.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla at st.com>
> Signed-off-by: Maxime Coquelin <maxime.coquelin at st.com>
> ---
> arch/arm/boot/dts/stih41x-b2000.dtsi | 7 +++++++
> arch/arm/boot/dts/stih41x-b2020.dtsi | 20 ++++++++++++++++++++
> 2 files changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
> index 8e694d2..346cc4bc 100644
> --- a/arch/arm/boot/dts/stih41x-b2000.dtsi
> +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
> @@ -37,5 +37,12 @@
> };
> };
>
> + /* HDMI Tx I2C */
> + i2c1: i2c at fed41000{
nit: Space before the '{'
> + status = "okay";
Consider enabling the node at the bottom.
> +
> + /* HDMI V1.3a supports Standard mode only */
> + clock-frequency = <100000>;
> + };
> };
> };
> diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
> index 133e181..10b98da 100644
> --- a/arch/arm/boot/dts/stih41x-b2020.dtsi
> +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
> @@ -38,5 +38,25 @@
> default-state = "off";
> };
> };
> +
> + i2c0: i2c at fed40000{
As above.
> + status = "okay";
> + };
> +
> + /* HDMI Tx I2C */
> + i2c1: i2c at fed41000{
As above.
> + status = "okay";
As above.
> + /* HDMI V1.3a supports Standard mode only */
> + clock-frequency = <100000>;
> + };
> +
> + sbc_i2c0: i2c at fe540000{
As above.
> + status = "okay";
> + };
> +
> + sbc_i2c1: i2c at fe541000{
Are these nodes referenced by phandle at all?
If not, consider dropping the <lable>:s
> + status = "okay";
> + };
> };
> };
Odd tabbing here.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the linux-arm-kernel
mailing list