[PATCHv4 10/18] arm: dts: add omap4 CPU thermal data

[Eduardo Valentin]

This patch changes a dtsi file to contain the thermal data
for MPU domain on OMAP4 and later SoCs. This data will
enable the passive cooling with CPUfreq cooling device
at 100C and the system will do a thermal shutdown at 125C.

This thermal data can be reused across TI SoC devices.

Cc: "Benoît Cousson" <bcousson at baylibre.com>
Cc: Tony Lindgren <tony at atomide.com>
Cc: Rob Herring <rob.herring at calxeda.com>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Stephen Warren <swarren at wwwdotorg.org>
Cc: Ian Campbell <ian.campbell at citrix.com>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: linux-omap at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin at ti.com>
---
 arch/arm/boot/dts/omap4-cpu-thermal.dtsi | 41 ++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap4-cpu-thermal.dtsi

diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
new file mode 100644
index 0000000..65a6deb
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Device Tree Source for OMAP4/5 SoC CPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin at ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+        thermal-sensors = <&bandgap     0>;
+
+        trips {
+                cpu_alert0: cpu_alert {
+                        temperature = <100000>; /* millicelsius */
+                        hysteresis = <2000>; /* millicelsius */
+                        type = THERMAL_TRIP_PASSIVE;
+                };
+                cpu_crit: cpu_crit {
+                        temperature = <125000>; /* millicelsius */
+                        hysteresis = <2000>; /* millicelsius */
+                        type = THERMAL_TRIP_CRITICAL;
+                };
+        };
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
-- 
1.8.2.1.342.gfa7285d