"cpufreq: fix serialization issues with freq change notifiers" breaks cpufreq too

Guennadi Liakhovetski g.liakhovetski at gmx.de
Tue Sep 10 13:07:39 EDT 2013


On Tue, 10 Sep 2013, Viresh Kumar wrote:

> On 10 September 2013 21:52, Guennadi Liakhovetski <g.liakhovetski at gmx.de> wrote:
> > Of course, isn't that what I've written above? reverted a commit and added
> > debug - in that order.
> 
> Ok, I misread it then :(
> 
> > Sure, I can... So, with the performance governor I get
> >
> > [    1.290000] cpufreq-cpu0 cpufreq-cpu0: Looking up cpu0-supply from device tree
> > [    1.290000] cpufreq: trying to register driver generic_cpu0
> > [    1.290000] cpufreq: adding CPU 0
> > [    1.290000] cpufreq: Adding link for CPU: 1
> > [    1.290000] cpufreq: setting new policy for CPU 0: 398667 - 1196000 kHz
> > [    1.290000] cpufreq: new min and max freqs are 398667 - 1196000 kHz
> > [    1.290000] cpufreq: governor switch
> > [    1.290000] cpufreq: __cpufreq_governor for CPU 0, event 4
> > [    1.290000] cpufreq: __cpufreq_governor for CPU 0, event 1
> > [    1.290000] cpufreq_performance: setting to 1196000 kHz because of event 1
> > [    1.290000] cpufreq: __cpufreq_driver_target().1665 1
> >
> > This is my debug - .transition_ongoing is incremented ^^^^^^^^
> >
> > [    1.300000] cpufreq: target for CPU 0: 1196000 kHz, relation 1, requested 1196000 kHz
> 
> Quite straight forward actually..

Apparently, not quite.

> Please try attached patch and see if it fixes
> your problem.. Which it should if I am not wrong.. I will send it
> separately then..

It helps only once. The first switching works, the second one doesn't. 
Below debug

[   12.010000] cpufreq: setting new policy for CPU 0: 398667 - 1196000 kHz
[   12.010000] cpufreq: new min and max freqs are 398667 - 1196000 kHz
[   12.010000] cpufreq: governor switch
[   12.010000] cpufreq: __cpufreq_governor for CPU 0, event 2
[   12.010000] cpufreq: __cpufreq_governor for CPU 0, event 5
[   12.010000] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[   12.020000] cpufreq: __cpufreq_governor for CPU 0, event 4
[   12.020000] cpufreq: __cpufreq_governor for CPU 0, event 1
[   12.020000] cpufreq_performance: setting to 1196000 kHz because of event 1
[   12.020000] cpufreq: target for CPU 0: 1196000 kHz, relation 1, requested 1196000 kHz
[   12.020000] cpufreq: governor: change or update limits
[   12.020000] cpufreq: __cpufreq_governor for CPU 0, event 3
[   12.020000] cpufreq_performance: setting to 1196000 kHz because of event 3
[   12.020000] cpufreq: target for CPU 0: 1196000 kHz, relation 1, requested 1196000 kHz
[   12.030000] cpufreq: setting new policy for CPU 0: 398667 - 1196000 kHz
[   12.030000] cpufreq: new min and max freqs are 398667 - 1196000 kHz
[   12.030000] cpufreq: governor switch
[   12.030000] cpufreq: __cpufreq_governor for CPU 0, event 2
[   12.030000] cpufreq: __cpufreq_governor for CPU 0, event 5
[   12.030000] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[   12.040000] cpufreq: __cpufreq_governor for CPU 0, event 4
[   12.040000] cpufreq: __cpufreq_governor for CPU 0, event 1
[   12.040000] cpufreq_performance: setting to 1196000 kHz because of event 1
[   12.040000] cpufreq: target for CPU 0: 1196000 kHz, relation 1, requested 1196000 kHz
[   12.040000] cpufreq: governor: change or update limits
[   12.040000] cpufreq: __cpufreq_governor for CPU 0, event 3
[   12.040000] cpufreq_performance: setting to 1196000 kHz because of event 3
[   12.040000] cpufreq: target for CPU 0: 1196000 kHz, relation 1, requested 1196000 kHz

echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

[   66.490000] cpufreq: setting new policy for CPU 0: 398667 - 1196000 kHz
[   66.490000] cpufreq: new min and max freqs are 398667 - 1196000 kHz
[   66.490000] cpufreq: governor switch
[   66.490000] cpufreq: __cpufreq_governor for CPU 0, event 2
[   66.490000] cpufreq: __cpufreq_governor for CPU 0, event 5
[   66.490000] cpufreq: __cpufreq_governor for CPU 0, event 4
[   66.490000] cpufreq: __cpufreq_governor for CPU 0, event 1
[   66.490000] cpufreq: target for CPU 0: 398667 kHz, relation 0, requested 398667 kHz
[   66.490000] cpufreq: __cpufreq_driver_target().1677 1
[   66.500000] cpufreq: notification 0 of frequency transition to 398666 kHz
[   66.500000] cpufreq: __cpufreq_notify_transition().297 2
[   66.500000] cpufreq: notification 0 of frequency transition to 398666 kHz
[   66.500000] cpufreq: __cpufreq_notify_transition().297 3
[   66.510000] cpufreq: notification 1 of frequency transition to 398666 kHz
[   66.510000] cpufreq: __cpufreq_notify_transition().327 2
[   66.520000] cpufreq: FREQ: 398666 - CPU: 0
[   66.520000] cpufreq: notification 1 of frequency transition to 398666 kHz
[   66.520000] cpufreq: __cpufreq_notify_transition().327 1
[   66.520000] cpufreq: FREQ: 398666 - CPU: 1
[   66.520000] cpufreq: cpufreq_notify_transition().366 0
[   66.530000] cpufreq: governor: change or update limits
[   66.530000] cpufreq: __cpufreq_governor for CPU 0, event 3
[   66.530000] cpufreq: target for CPU 0: 398667 kHz, relation 0, requested 398667 kHz
[   66.530000] cpufreq: __cpufreq_driver_target().1677 1

echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

[   72.470000] cpufreq: setting new policy for CPU 0: 398667 - 1196000 kHz
[   72.470000] cpufreq: new min and max freqs are 398667 - 1196000 kHz
[   72.470000] cpufreq: governor switch
[   72.470000] cpufreq: __cpufreq_governor for CPU 0, event 2
[   72.470000] cpufreq: __cpufreq_governor for CPU 0, event 5
[   72.470000] cpufreq: __cpufreq_governor for CPU 0, event 4
[   72.470000] cpufreq: __cpufreq_governor for CPU 0, event 1
[   72.470000] cpufreq_performance: setting to 1196000 kHz because of event 1
[   72.470000] cpufreq: target for CPU 0: 1196000 kHz, relation 1, requested 1196000 kHz
[   72.470000] cpufreq: governor: change or update limits
[   72.470000] cpufreq: __cpufreq_governor for CPU 0, event 3
[   72.470000] cpufreq_performance: setting to 1196000 kHz because of event 3
[   72.470000] cpufreq: target for CPU 0: 1196000 kHz, relation 1, requested 1196000 kHz

> Thanks for your time..

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/



More information about the linux-arm-kernel mailing list