[PATCH V2 2/2] ARM: tegra: add palmas pincontrol to Dalmore device tree
Laxman Dewangan
ldewangan at nvidia.com
Wed Sep 18 09:07:22 EDT 2013
Add Palmas pincontrol to Dalmore device tree and make following
configuration as default:
- Disable DVFS1 and DVFS2.
- Set GPIO6 to gpio mode.
Signed-off-by: Laxman Dewangan <ldewangan at nvidia.com>
---
changes from V1:
- Renames the node name to pinmux as suggested on patch V1.
- Not sure that this will create the issue with other node having same
name as pinmux in top of the dts file.
arch/arm/boot/dts/tegra114-dalmore.dts | 13 +++++++++++++
1 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 6023028..dc5cdd7 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -1011,6 +1011,19 @@
interrupt-parent = <&palmas>;
interrupts = <8 0>;
};
+
+ pinmux {
+ compatible = "ti,tps65913-pinctrl";
+ pinctrl-names = "default";
+ pinctrl-0 = <&palmas_default>;
+
+ palmas_default: pinmux {
+ pin_gpio6 {
+ pins = "gpio6";
+ function = "gpio";
+ };
+ };
+ };
};
};
--
1.7.1.1
More information about the linux-arm-kernel
mailing list