[PATCH v2 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq

[Guennadi Liakhovetski]

Hi Simon

Thanks for following on this.

On Wed, 25 Sep 2013, Simon Horman wrote:

> On Sat, May 25, 2013 at 10:34:45AM +0900, Simon Horman wrote:
> > On Tue, May 21, 2013 at 04:07:46PM +0200, Guennadi Liakhovetski wrote:
> > > This patch adds support for the Z-clock on r8a7790 SoCs, which is driving
> > > the Cortex A15 core, and a "cpufreq-cpu0" platform device. Adding an
> > > "operating-points" property to the CPU0 DT node and a regulator, this
> > > patch allows platforms to use the generic cpufreq-cpu0 driver to use
> > > SoC's DVFS capabilities.
> > > 
> > > Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas at gmail.com>
> > > ---
> > > 
> > > v2:
> > > 1. a typo in the r8a7790 datasheet confused me to implement kick-bit 
> > > handling wrongly, this is fixed in this version
> > > 2. patch 3 merged with this one
> > > 
> > > Same comments, as to v1 of this series, apply.
> > 
> > Magnus,
> > 
> > could you please review this series?
> 
> I have marked this patch as deferred in the patch tracker
> as it has been rotting there for several months now.
> 
> I will need the following before taking it into the tree:
> 1. Repost, rebased if needed.
> 2. An ack from Magnus or indication from him that someone else should
>    review it.

This patch is superseded by my recent patches

[PATCH 3/4] ARM: shmobile: r8a7790: add CPUFreq clock support
[PATCH/RFC 4/4] ARM: shmobile: lager: add CPUFreq support

Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/