[PATCH 195/228] cpufreq: kirkwood: remove calls to cpufreq_notify_transition()
Andrew Lunn
andrew at lunn.ch
Fri Sep 13 12:18:20 EDT 2013
On Fri, Sep 13, 2013 at 06:32:21PM +0530, Viresh Kumar wrote:
> - if (freqs.old != freqs.new) {
> - local_irq_disable();
> -
> - /* Disable interrupts to the CPU */
> - reg = readl_relaxed(priv.base);
> - reg |= CPU_SW_INT_BLK;
> - writel_relaxed(reg, priv.base);
> -
> - switch (state) {
> - case STATE_CPU_FREQ:
> - clk_disable(priv.powersave_clk);
> - break;
> - case STATE_DDR_FREQ:
> - clk_enable(priv.powersave_clk);
> - break;
> - }
Hi Viresh
I see you removed the test that the old and the new frequency are
different. Is this guaranteed by the core? Because if not, you can
lockup the CPU. The call to cpu_do_idle() will never return.
Thanks
Andrew
More information about the linux-arm-kernel
mailing list