[PATCH v3 02/10] usb: phy: generic: Don't use regulator framework for RESET line
Roger Quadros
rogerq at ti.com
Tue Sep 24 04:53:48 EDT 2013
Modelling the RESET line as a regulator supply wasn't a good idea
as it kind of abuses the regulator framework and also makes adaptation
code more complex.
Instead, manage the RESET gpio line directly in the driver. Update
the device tree binding information.
This also makes us easy to migrate to a dedicated GPIO RESET controller
whenever it becomes available.
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
.../devicetree/bindings/usb/usb-nop-xceiv.txt | 7 +-
drivers/usb/phy/phy-am335x.c | 2 +-
drivers/usb/phy/phy-generic.c | 84 +++++++++++++-------
drivers/usb/phy/phy-generic.h | 6 +-
4 files changed, 63 insertions(+), 36 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
index d7e2726..1bd37fa 100644
--- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
+++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
@@ -15,7 +15,7 @@ Optional properties:
- vcc-supply: phandle to the regulator that provides RESET to the PHY.
-- reset-supply: phandle to the regulator that provides power to the PHY.
+- reset-gpios: Should specify the GPIO for reset.
Example:
@@ -25,10 +25,9 @@ Example:
clocks = <&osc 0>;
clock-names = "main_clk";
vcc-supply = <&hsusb1_vcc_regulator>;
- reset-supply = <&hsusb1_reset_regulator>;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
-hsusb1_vcc_regulator provides power to the PHY and hsusb1_reset_regulator
-controls RESET.
+hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index c4d614d..fb4bf28 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -53,7 +53,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
}
ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen,
- USB_PHY_TYPE_USB2, 0, false, false);
+ USB_PHY_TYPE_USB2, 0, false);
if (ret)
return ret;
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index efe59f3..36d7071 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -35,6 +35,9 @@
#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
#include "phy-generic.h"
@@ -64,6 +67,23 @@ static int nop_set_suspend(struct usb_phy *x, int suspend)
return 0;
}
+static void nop_reset_set(struct usb_phy_gen_xceiv *nop, int asserted)
+{
+ int value;
+
+ if (!gpio_is_valid(nop->gpio_reset))
+ return;
+
+ value = asserted;
+ if (nop->reset_active_low)
+ value = !value;
+
+ gpio_set_value_cansleep(nop->gpio_reset, value);
+
+ if (!asserted)
+ usleep_range(10000, 20000);
+}
+
int usb_gen_phy_init(struct usb_phy *phy)
{
struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
@@ -76,11 +96,8 @@ int usb_gen_phy_init(struct usb_phy *phy)
if (!IS_ERR(nop->clk))
clk_enable(nop->clk);
- if (!IS_ERR(nop->reset)) {
- /* De-assert RESET */
- if (regulator_enable(nop->reset))
- dev_err(phy->dev, "Failed to de-assert reset\n");
- }
+ /* De-assert RESET */
+ nop_reset_set(nop, 0);
return 0;
}
@@ -90,11 +107,8 @@ void usb_gen_phy_shutdown(struct usb_phy *phy)
{
struct usb_phy_gen_xceiv *nop = dev_get_drvdata(phy->dev);
- if (!IS_ERR(nop->reset)) {
- /* Assert RESET */
- if (regulator_disable(nop->reset))
- dev_err(phy->dev, "Failed to assert reset\n");
- }
+ /* Assert RESET */
+ nop_reset_set(nop, 1);
if (!IS_ERR(nop->clk))
clk_disable(nop->clk);
@@ -136,8 +150,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
}
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
- enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
- bool needs_reset)
+ enum usb_phy_type type, u32 clk_rate, bool needs_vcc)
{
int err;
@@ -176,12 +189,22 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
return -EPROBE_DEFER;
}
- nop->reset = devm_regulator_get(dev, "reset");
- if (IS_ERR(nop->reset)) {
- dev_dbg(dev, "Error getting reset regulator: %ld\n",
- PTR_ERR(nop->reset));
- if (needs_reset)
- return -EPROBE_DEFER;
+ if (gpio_is_valid(nop->gpio_reset)) {
+ unsigned long gpio_flags;
+
+ /* Assert RESET */
+ if (nop->reset_active_low)
+ gpio_flags = GPIOF_OUT_INIT_LOW;
+ else
+ gpio_flags = GPIOF_OUT_INIT_HIGH;
+
+ err = devm_gpio_request_one(dev, nop->gpio_reset,
+ gpio_flags, dev_name(dev));
+ if (err) {
+ dev_err(dev, "Error requesting RESET GPIO %d\n",
+ nop->gpio_reset);
+ return err;
+ }
}
nop->dev = dev;
@@ -217,31 +240,36 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
int err;
u32 clk_rate = 0;
bool needs_vcc = false;
- bool needs_reset = false;
+
+ nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
+ if (!nop)
+ return -ENOMEM;
+
+ nop->reset_active_low = true; /* default behaviour */
if (dev->of_node) {
struct device_node *node = dev->of_node;
+ enum of_gpio_flags flags;
if (of_property_read_u32(node, "clock-frequency", &clk_rate))
clk_rate = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
- needs_reset = of_property_read_bool(node, "reset-supply");
+ nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
+ 0, &flags);
+ if (nop->gpio_reset == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ nop->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
} else if (pdata) {
type = pdata->type;
clk_rate = pdata->clk_rate;
needs_vcc = pdata->needs_vcc;
- needs_reset = pdata->needs_reset;
+ nop->gpio_reset = pdata->gpio_reset;
}
- nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
- if (!nop)
- return -ENOMEM;
-
-
- err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc,
- needs_reset);
+ err = usb_phy_gen_create_phy(dev, nop, type, clk_rate, needs_vcc);
if (err)
return err;
diff --git a/drivers/usb/phy/phy-generic.h b/drivers/usb/phy/phy-generic.h
index 61687d5..6c3a2e1 100644
--- a/drivers/usb/phy/phy-generic.h
+++ b/drivers/usb/phy/phy-generic.h
@@ -6,15 +6,15 @@ struct usb_phy_gen_xceiv {
struct device *dev;
struct clk *clk;
struct regulator *vcc;
- struct regulator *reset;
+ int gpio_reset;
+ bool reset_active_low;
};
int usb_gen_phy_init(struct usb_phy *phy);
void usb_gen_phy_shutdown(struct usb_phy *phy);
int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop,
- enum usb_phy_type type, u32 clk_rate, bool needs_vcc,
- bool needs_reset);
+ enum usb_phy_type type, u32 clk_rate, bool needs_vcc);
void usb_phy_gen_cleanup_phy(struct usb_phy_gen_xceiv *nop);
#endif
--
1.7.4.1
More information about the linux-arm-kernel
mailing list