[PATCH] ARM: shmobile: Add r8a7791 Koelsch DT reference support

Simon Horman horms at verge.net.au
Wed Sep 25 19:42:27 EDT 2013


On Thu, Sep 26, 2013 at 08:21:58AM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm at opensource.se>
> 
> Add DT reference support for the r8a7791 Koelsch board.
> 
> This board support file will be used together with common
> clocks in the future.
> 
> Signed-off-by: Magnus Damm <damm at opensource.se>
> ---
> 
>  Written against renesas-devel-20130925
> 
>  arch/arm/boot/dts/Makefile                       |    1 
>  arch/arm/boot/dts/r8a7791-koelsch-reference.dts  |   32 ++++++++++++++++
>  arch/arm/mach-shmobile/Kconfig                   |   11 +++++
>  arch/arm/mach-shmobile/Makefile                  |    1 
>  arch/arm/mach-shmobile/Makefile.boot             |    1 
>  arch/arm/mach-shmobile/board-koelsch-reference.c |   43 ++++++++++++++++++++++
>  6 files changed, 89 insertions(+)

Hi Magnus,

this code looks good to me.

Could you split the patch into two?

1. A board patch for the bits under mach-shmobile/ and;
2. A DT patch for the bits under dts/

Thanks

> 
> --- 0001/arch/arm/boot/dts/Makefile
> +++ work/arch/arm/boot/dts/Makefile	2013-09-26 07:45:16.000000000 +0900
> @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm
>  	r8a7779-marzen.dtb \
>  	r8a7779-marzen-reference.dtb \
>  	r8a7791-koelsch.dtb \
> +	r8a7791-koelsch-reference.dtb \
>  	r8a7790-lager.dtb \
>  	r8a7790-lager-reference.dtb \
>  	sh73a0-kzm9g.dtb \
> --- /dev/null
> +++ work/arch/arm/boot/dts/r8a7791-koelsch-reference.dts	2013-09-26 07:40:52.000000000 +0900
> @@ -0,0 +1,32 @@
> +/*
> + * Device Tree Source for the Koelsch board
> + *
> + * Copyright (C) 2013 Renesas Electronics Corporation
> + * Copyright (C) 2013 Renesas Solutions Corp.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +/dts-v1/;
> +/include/ "r8a7791.dtsi"
> +
> +/ {
> +	model = "Koelsch";
> +	compatible = "renesas,koelsch-reference", "renesas,r8a7791";
> +
> +	chosen {
> +		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
> +	};
> +
> +	memory at 40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0x80000000>;
> +	};
> +
> +	lbsc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +	};
> +};
> --- 0001/arch/arm/mach-shmobile/Kconfig
> +++ work/arch/arm/mach-shmobile/Kconfig	2013-09-26 07:38:59.000000000 +0900
> @@ -226,6 +226,17 @@ config MACH_KOELSCH
>  	depends on ARCH_R8A7791
>  	select USE_OF
>  
> +config MACH_KOELSCH_REFERENCE
> +	bool "Koelsch board - Reference Device Tree Implementation"
> +	depends on ARCH_R8A7791
> +	select USE_OF
> +	---help---
> +	   Use reference implementation of Koelsch board support
> +	   which makes use of device tree at the expense
> +	   of not supporting a number of devices.
> +
> +	   This is intended to aid developers
> +
>  config MACH_KZM9D
>  	bool "KZM9D board"
>  	depends on ARCH_EMEV2
> --- 0001/arch/arm/mach-shmobile/Makefile
> +++ work/arch/arm/mach-shmobile/Makefile	2013-09-26 07:38:15.000000000 +0900
> @@ -64,6 +64,7 @@ obj-$(CONFIG_MACH_LAGER_REFERENCE)	+= bo
>  obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
>  obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
>  obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
> +obj-$(CONFIG_MACH_KOELSCH_REFERENCE)	+= board-koelsch-reference.o
>  obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
>  obj-$(CONFIG_MACH_KZM9D_REFERENCE)	+= board-kzm9d-reference.o
>  obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
> --- 0001/arch/arm/mach-shmobile/Makefile.boot
> +++ work/arch/arm/mach-shmobile/Makefile.boot	2013-09-26 07:39:10.000000000 +0900
> @@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_R
>  loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
>  loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
>  loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
> +loadaddr-$(CONFIG_MACH_KOELSCH_REFERENCE) += 0x40008000
>  loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
>  loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
>  loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
> --- /dev/null
> +++ work/arch/arm/mach-shmobile/board-koelsch-reference.c	2013-09-26 07:41:56.000000000 +0900
> @@ -0,0 +1,43 @@
> +/*
> + * Koelsch board support - Reference DT implementation
> + *
> + * Copyright (C) 2013  Renesas Electronics Corporation
> + * Copyright (C) 2013  Renesas Solutions Corp.
> + * Copyright (C) 2013  Magnus Damm
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/of_platform.h>
> +#include <mach/r8a7791.h>
> +#include <asm/mach/arch.h>
> +
> +static void __init koelsch_add_standard_devices(void)
> +{
> +	r8a7791_clock_init();
> +	r8a7791_add_dt_devices();
> +        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +}
> +
> +static const char * const koelsch_boards_compat_dt[] __initconst = {
> +	"renesas,koelsch-reference",
> +	NULL,
> +};
> +
> +DT_MACHINE_START(KOELSCH_DT, "koelsch")
> +	.init_early	= r8a7791_init_early,
> +	.init_machine	= koelsch_add_standard_devices,
> +	.dt_compat	= koelsch_boards_compat_dt,
> +MACHINE_END
> 



More information about the linux-arm-kernel mailing list