[PATCH 0/3 v2] clk: keystone: Add common clock drivers

[Santosh Shilimkar]

Mike,

On Thursday 29 August 2013 03:14 PM, Santosh Shilimkar wrote:
> v2:
> - Aligned the bindings as per the list discussion. Removed the additional
> 	parameters by usage of reg-names and additional compatible fields.
> - Addressed all the comments from v1 on drivers.
> - Split the series into clock drivers($subject series) and
> 	platform, dt updates. Will post that one separately.
> 
> Special thanks to Mike and Mark for the detailed review on v1.
> 
> Series is an attempt to add the clock drivers for Keystone SOCs
> based on common clock framework. A PLL drivers taking care of
> SOC PLLs and a gate control driver taking clock management for
> the IPs. The current Keystone based SOCs don' support dynamic power
> management usecases like DVFS, SOC ilde etc and hence most of the
> usage is limited to enabling clocks and finding the current clock
> rate etc.
> 
> Based on to of Mike's dt binding series [1] and tested on Keystone2
> EVM.
>
> Cc: Mike Turquette <mturquette at linaro.org>

As aligned off-list, I will revise the series to remove the
dependency with your DT bindings series which still seems to
be under discussion.

Regards,
Santosh