[PATCH 4/4] RX-51: Add platform function and data for bq24150a charger

[Pali Rohár]

On Monday 23 September 2013 22:47:15 Sebastian Reichel wrote:
> On Mon, Sep 23, 2013 at 10:06:46PM +0200, Pali Rohár wrote:
> > On Monday 23 September 2013 22:00:09 Sebastian Reichel wrote:
> > > On Mon, Sep 23, 2013 at 09:16:18PM +0200, Pali Rohár wrote:
> > > > It is not as simple as it looks. This is reason why I
> > > > submited this patch long time after I submited bq2415x
> > > > driver.
> > > > 
> > > > Problem is that for rx51 is needed specific function
> > > > which connect to two drivers (bq2415x and isp1704) plus
> > > > it call specific rx51 board functions.
> > > > 
> > > > Something which cannot be in DT (unless DT support C/ASM
> > > > code).
> > > 
> > > mh could isp1704 driver expose the data via the regulator
> > > framework?
> > 
> > No, isp1704 is power supply driver and export data via power
> > supply (sysfs) interface. It is not regulator but charger
> > driver.
> 
> well it does not charge the battery directly, but just
> provides a power line with 5 Volt and a specified amount of
> current to the system, doesn't it?
> 

No, isp1704 driver is doing fastcharger detection (and then 
export charger type via sysfs power supply) based on musb usb 
events.

Real charging (enabling/disabling and setting properties) is done 
by bq24150a chip which has own power driver bq2415x_charger.

As already wrote this is not simple and this is reason why I sent 
board data and functions only now...

> From my POV this is a candiate for the regulator framework:
> 
> https://www.kernel.org/doc/Documentation/power/regulator/overv
> iew.txt
> 
> -- Sebastian

-- 
Pali Rohár
pali.rohar at gmail.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130924/23254e9e/attachment.sig>