[PATCH 27/38] iio: pressure-core: st: Give some indication if device probing was successful

[Mark Brown]

On Wed, Sep 11, 2013 at 08:29:55AM +0100, Lee Jones wrote:

> Only if you print out every regulator, clock, GPIO pin and things of
> this nature. Key hardware blocks such as; SD, Flash, USB, Eth, HDMI,
> Audio, UART, GPIO and I2C controllers and Sensors I think deserve a
> one line "I'm here and working" message.

The usual rule people apply with this stuff is if the driver has read
back information it can display from the hardware (eg, a revision) then
that's OK.  Things that are likely to crash the system if they fail tend
to also be OK (this is why the regualtor API is quite chatty for
example, a lot of the things it does can cause an immediate crash).
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130911/235abe2c/attachment.sig>