[PATCH] ARM: DTS: DRA7: Add TPS659038 PMIC nodes

[Keerthy]

Benoit,


On Monday 26 August 2013 11:06 AM, Keerthy wrote:
> The Patch adds nodes for TPS659038 PMIC for DRA7 boards.
>
> It is based on top of:
> http://comments.gmane.org/gmane.linux.ports.arm.omap/102459.
>
> Documentation:	Documentation/devicetree/bindings/mfd/palmas.txt
> 		Documentation/devicetree/bindings/regulator/palmas-pmic.txt		
>
> Boot Tested on DRA7 d1 Board.

Any comments on this patch?

> Signed-off-by: Keerthy <j-keerthy at ti.com>
> ---
>   arch/arm/boot/dts/dra7-evm.dts |  118 ++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 118 insertions(+)
>
> Index: linux/arch/arm/boot/dts/dra7-evm.dts
> ===================================================================
> --- linux.orig/arch/arm/boot/dts/dra7-evm.dts	2013-08-26 09:57:52.496173554 +0530
> +++ linux/arch/arm/boot/dts/dra7-evm.dts	2013-08-26 10:38:44.995414695 +0530
> @@ -93,6 +93,119 @@
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&i2c1_pins>;
>   	clock-frequency = <400000>;
> +
> +	tps659038: tps659038 at 58 {
> +		compatible = "ti,tps659038";
> +		reg = <0x58>;
> +
> +		tps659038_pmic {
> +			compatible = "ti,tps659038-pmic";
> +
> +			regulators {
> +				smps123_reg: smps123 {
> +					/* VDD_MPU */
> +						regulator-name = "smps123";
> +						regulator-min-microvolt = < 850000>;
> +						regulator-max-microvolt = <1250000>;
> +						regulator-always-on;
> +						regulator-boot-on;
> +					};
> +
> +				smps45_reg: smps45 {
> +						/* VDD_DSPEVE */
> +						regulator-name = "smps45";
> +						regulator-min-microvolt = < 850000>;
> +						regulator-max-microvolt = <1150000>;
> +						regulator-boot-on;
> +					};
> +
> +				smps6_reg: smps6 {
> +						/* VDD_GPU - over VDD_SMPS6 */
> +						regulator-name = "smps6";
> +						regulator-min-microvolt = <850000>;
> +						regulator-max-microvolt = <12500000>;
> +						regulator-boot-on;
> +					};
> +
> +				smps7_reg: smps7 {
> +						/* CORE_VDD */
> +						regulator-name = "smps7";
> +						regulator-min-microvolt = <850000>;
> +						regulator-max-microvolt = <1030000>;
> +						regulator-always-on;
> +						regulator-boot-on;
> +					};
> +
> +				smps8_reg: smps8 {
> +						/* VDD_IVAHD */
> +						regulator-name = "smps8";
> +						regulator-min-microvolt = < 850000>;
> +						regulator-max-microvolt = <1250000>;
> +						regulator-boot-on;
> +					};
> +
> +				smps9_reg: smps9 {
> +						/* VDDS1V8 */
> +						regulator-name = "smps9";
> +						regulator-min-microvolt = <1800000>;
> +						regulator-max-microvolt = <1800000>;
> +						regulator-always-on;
> +						regulator-boot-on;
> +					};
> +
> +				ldo1_reg: ldo1 {
> +						/* LDO1_OUT --> SDIO  */
> +						regulator-name = "ldo1";
> +						regulator-min-microvolt = <1800000>;
> +						regulator-max-microvolt = <3300000>;
> +						regulator-boot-on;
> +					};
> +
> +				ldo2_reg: ldo2 {
> +						/* VDD_RTCIO */
> +						/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
> +						regulator-name = "ldo2";
> +						regulator-min-microvolt = <3300000>;
> +						regulator-max-microvolt = <3300000>;
> +						regulator-boot-on;
> +					};
> +
> +				ldo3_reg: ldo3 {
> +						/* VDDA_1V8_PHY */
> +						regulator-name = "ldo3";
> +						regulator-min-microvolt = <1800000>;
> +						regulator-max-microvolt = <1800000>;
> +						regulator-boot-on;
> +					};
> +
> +				ldo9_reg: ldo9 {
> +						/* VDD_RTC */
> +						regulator-name = "ldo9";
> +						regulator-min-microvolt = <1050000>;
> +						regulator-max-microvolt = <1050000>;
> +						regulator-boot-on;
> +					};
> +
> +				ldoln_reg: ldoln {
> +						/* VDDA_1V8_PLL */
> +						regulator-name = "ldoln";
> +						regulator-min-microvolt = <1800000>;
> +						regulator-max-microvolt = <1800000>;
> +						regulator-always-on;
> +						regulator-boot-on;
> +					};
> +
> +				ldousb_reg: ldousb {
> +						/* VDDA_3V_USB: VDDA_USBHS33 */
> +						regulator-name = "ldousb";
> +						regulator-min-microvolt = <3300000>;
> +						regulator-max-microvolt = <3300000>;
> +						regulator-boot-on;
> +					};
> +
> +				};
> +			};
> +		};
>   };
>   
>   &i2c2 {

Regards,
Keerthy