[PATCH 06/11] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor

[Lee Jones]

On Wed, 04 Sep 2013, Denis CIOCCA wrote:

> > Due to the MACRO used, the task of reading, understanding and maintaining
> > the LPS331AP's channel descriptor is substantially difficult. This patch
> > is based on the view that it's better to have easy to read, maintainable
> > code than to save a few lines here and there. For that reason we're
> > expanding the array so initialisation is completed in full.
> Also for this one, the channel names are general and can be shared 
> between different sensors. For the channel definition it's not a problem 
> for me, but I think it's not necessary adds all that code...

I'm not sure what you mean by this. Would you be kind enough to
explain it in a different way please?

> > Signed-off-by: Lee Jones <lee.jones at linaro.org>
> > ---
> >   drivers/iio/pressure/st_pressure_core.c | 45 +++++++++++++++++++++++++--------
> >   1 file changed, 34 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
> > index becfb25..7ba9299 100644
> > --- a/drivers/iio/pressure/st_pressure_core.c
> > +++ b/drivers/iio/pressure/st_pressure_core.c
> > @@ -58,16 +58,39 @@
> >   #define ST_PRESS_LPS331AP_OUT_XL_ADDR		0x28
> >   #define ST_TEMP_LPS331AP_OUT_L_ADDR		0x2b
> >   
> > -static const struct iio_chan_spec st_press_channels[] = {
> > -	ST_SENSORS_LSM_CHANNELS(IIO_PRESSURE,
> > +static const struct iio_chan_spec st_press_lsp331ap_channels[] = {
> > +	{
> > +		.type = IIO_PRESSURE,
> > +		.channel2 = IIO_NO_MOD,
> > +		.address = ST_PRESS_LPS331AP_OUT_XL_ADDR,
> > +		.scan_index = ST_SENSORS_SCAN_X,
> > +		.scan_type = {
> > +			.sign = 'u',
> > +			.realbits = 24,
> > +			.storagebits = 24,
> > +			.endianness = IIO_LE,
> > +		},
> > +		.info_mask_separate =
> >   			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
> > -			ST_SENSORS_SCAN_X, 0, IIO_NO_MOD, 'u', IIO_LE, 24, 24,
> > -			ST_PRESS_LPS331AP_OUT_XL_ADDR),
> > -	ST_SENSORS_LSM_CHANNELS(IIO_TEMP,
> > -			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
> > -						BIT(IIO_CHAN_INFO_OFFSET),
> > -			-1, 0, IIO_NO_MOD, 's', IIO_LE, 16, 16,
> > -			ST_TEMP_LPS331AP_OUT_L_ADDR),
> > +		.modified = 0,
> > +	},
> > +	{
> > +		.type = IIO_TEMP,
> > +		.channel2 = IIO_NO_MOD,
> > +		.address = ST_TEMP_LPS331AP_OUT_L_ADDR,
> > +		.scan_index = -1,
> > +		.scan_type = {
> > +			.sign = 'u',
> > +			.realbits = 16,
> > +			.storagebits = 16,
> > +			.endianness = IIO_LE,
> > +		},
> > +		.info_mask_separate =
> > +			BIT(IIO_CHAN_INFO_RAW) |
> > +			BIT(IIO_CHAN_INFO_SCALE) |
> > +			BIT(IIO_CHAN_INFO_OFFSET),
> > +		.modified = 0,
> > +	},
> >   	IIO_CHAN_SOFT_TIMESTAMP(1)
> >   };
> >   
> > @@ -77,7 +100,7 @@ static const struct st_sensors st_press_sensors[] = {
> >   		.sensors_supported = {
> >   			[0] = LPS331AP_PRESS_DEV_NAME,
> >   		},
> > -		.ch = (struct iio_chan_spec *)st_press_channels,
> > +		.ch = (struct iio_chan_spec *)st_press_lsp331ap_channels,
> >   		.odr = {
> >   			.addr = ST_PRESS_LPS331AP_ODR_ADDR,
> >   			.mask = ST_PRESS_LPS331AP_ODR_MASK,
> > @@ -214,7 +237,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
> >   	pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
> >   	pdata->multiread_bit = pdata->sensor->multi_read_bit;
> >   	indio_dev->channels = pdata->sensor->ch;
> > -	indio_dev->num_channels = ARRAY_SIZE(st_press_channels);
> > +	indio_dev->num_channels = ARRAY_SIZE(st_press_lsp331ap_channels);
> >   
> >   	pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
> >   						&pdata->sensor->fs.fs_avl[0];

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog