[RFC PATCH 15/15] arm: dts: dra7: add sata node

Roger Quadros rogerq at ti.com
Thu Sep 19 09:24:19 EDT 2013


From: Balaji T K <balajitk at ti.com>

Add support for sata controller.

[Roger Q] Clean up.

CC: Benoit Cousson <bcousson at baylibre.com>
Signed-off-by: Balaji T K <balajitk at ti.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 arch/arm/boot/dts/dra7.dtsi |   49 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 49 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce9a0f0..545545d 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -426,6 +426,55 @@
 			dma-names = "tx", "rx";
 		};
 
+		omap_control_sata: control-phy at 4a002374 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002374 0x4>;
+			reg-names = "power";
+			clocks = <&sys_clkin1>;
+			clock-names = "sysclk";
+		};
+
+		ocp2scp3: ocp2scp3 at 4a090000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp3";
+			reg = <0x4a090000 0x1f>; /* ocp2scp3 */
+			reg-names = "ocp2scp3";
+			sata_phy: sataphy at 4A096000 {
+				compatible = "ti,phy-pipe3-sata";
+				reg = <0x4A096000 0x80>, /* phy_rx */
+				      <0x4A096400 0x64>, /* phy_tx */
+				      <0x4A096800 0x40>; /* pll_ctrl */
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_sata>;
+				clocks = <&sata_ref_clk>,
+					 <&sys_clkin1>;
+				clock-names = "optclk", "sysclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		sata: sata at 4a141100 {
+			compatible = "ti,sata";
+			ti,hwmods = "sata";
+			reg = <0x4a141100 0x7>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			dwc-ahci at 4a140000 {
+				  compatible = "snps,dwc-ahci";
+				  reg = <0x4a140000 0x1100>;
+				  interrupts = <0 54 0x4>;
+				  phys = <&sata_phy>;
+				  phy-names = "sata-phy";
+				  clocks = <&sata_ref_clk>;
+				  clock-names = "optclk";
+			};
+		};
+
+
 		mcspi1: spi at 48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
-- 
1.7.4.1




More information about the linux-arm-kernel mailing list