[PATCH 0/3] ARM: dts: Enable EDMA, MMC and SPI on AM33XX for v3.13

[Benoit Cousson]

Hi Joel,

Thanks for the repost.

I'll applied that one now.

Regards,
Benoit

On 10/09/2013 21:24, Joel Fernandes wrote:
> Here are last few patches required to add EDMA and MMC/SPI support for AM33xx.
>
> Now that all dependent DMA patches and fixes are in linux next or mainline, except
> for [1] which should go in for 3.12 -rc cycle, it is safe to enable MMC and SPI support
> and this patch series enables it. These are originally Matt Porter's patches with
> changes to make it work with recent kernels, addition of irq, memory resources and
> enable other extra properties.
>
> These patches should cleanly apply on master branch after Koen's patch [2] for basic
> BBB DT support is applied.
>
> MMC support is enabled for: Beaglebone, AM335x EVM and EVM-SK boards. MMC support
> for BBB is intentionally not added due to custom fixes and other patches that are
> in Koen's tree and which will be separately submitted by him.
>
> [1] http://marc.info/?l=linux-omap&m=137883926226451&w=2
> [2] http://comments.gmane.org/gmane.linux.kernel.stable/63648
>
> Matt Porter (3):
>    ARM: dts: add AM33XX EDMA support
>    ARM: dts: add AM33XX SPI DMA support
>    ARM: dts: add AM33XX MMC support and documentation
>
>   .../devicetree/bindings/mmc/ti-omap-hsmmc.txt      | 26 +++++++++-
>   arch/arm/boot/dts/am335x-bone.dts                  | 11 ++++
>   arch/arm/boot/dts/am335x-evm.dts                   |  7 +++
>   arch/arm/boot/dts/am335x-evmsk.dts                 |  7 +++
>   arch/arm/boot/dts/am33xx.dtsi                      | 60 ++++++++++++++++++++++
>   5 files changed, 110 insertions(+), 1 deletion(-)
>