[PATCH] video: mmp: drop needless devm cleanup

[Zhou Zhu]

On 09/24/2013 03:34 PM, Tomi Valkeinen wrote:
> On 23/09/13 19:19, Russell King - ARM Linux wrote:
>> On Mon, Sep 23, 2013 at 06:13:10PM +0200, Uwe Kleine-König wrote:
>>> The nice thing about devm_* is that the driver doesn't need to free the
>>> resources but the driver core takes care about that. This also
>>> simplifies the error path quite a bit and removes the wrong check for a
>>> clock pointer being NULL.
>>>
>>> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
>>> ---
>>>   drivers/video/mmp/hw/mmp_ctrl.c | 17 ++---------------
>>>   1 file changed, 2 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/drivers/video/mmp/hw/mmp_ctrl.c b/drivers/video/mmp/hw/mmp_ctrl.c
>>> index 75dca19..6ac7552 100644
>>> --- a/drivers/video/mmp/hw/mmp_ctrl.c
>>> +++ b/drivers/video/mmp/hw/mmp_ctrl.c
>>> @@ -514,7 +514,7 @@ static int mmphw_probe(struct platform_device *pdev)
>>>   	if (IS_ERR(ctrl->clk)) {
>>>   		dev_err(ctrl->dev, "unable to get clk %s\n", mi->clk_name);
>>>   		ret = -ENOENT;
>>> -		goto failed_get_clk;
>>> +		goto failed;
>>>   	}
>>>   	clk_prepare_enable(ctrl->clk);
>>>
>>> @@ -551,21 +551,8 @@ failed_path_init:
>>>   		path_deinit(path_plat);
>>>   	}
>>>
>>> -	if (ctrl->clk) {
>>> -		devm_clk_put(ctrl->dev, ctrl->clk);
>>> -		clk_disable_unprepare(ctrl->clk);
>>
>> And this patch also fixes the above: disabling/unpreparing _after_ putting
>> the thing - which was quite silly... :)
>
> Hmm, I wonder if that causes any issues... I.e. should this patch go for
> 3.12, or is 3.13 fine?
>
>   Tomi
>
It would cause oops if probe failed due to some reason - although it 
would almost never happen so we missed it.
Thank you for finding it out.

-- 
Thanks, -Zhou