[PATCH 2/4] ARM: kirkwood: Remove unneeded PCIe clock adding

[Ezequiel Garcia]

Since the PCIe devices is properly initialized from the DT, the clocks
are now referenced in the device tree nodes, and it's not needed
to have this hack to add them explicitly.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia at free-electrons.com>
---
 arch/arm/mach-kirkwood/board-dt.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index ee6297e..1bbced8 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -44,14 +44,6 @@ static void __init kirkwood_legacy_clk_init(void)
 	clkspec.np = np;
 	clkspec.args_count = 1;
 
-	clkspec.args[0] = CGC_BIT_PEX0;
-	orion_clkdev_add("0", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
-	clkspec.args[0] = CGC_BIT_PEX1;
-	orion_clkdev_add("1", "pcie",
-			 of_clk_get_from_provider(&clkspec));
-
 	/*
 	 * The ethernet interfaces forget the MAC address assigned by
 	 * u-boot if the clocks are turned off. Until proper DT support
-- 
1.8.1.5