[PATCH v6 0/5] clk: clock deregistration support
Sylwester Nawrocki
sylvester.nawrocki at gmail.com
Tue Sep 24 17:38:44 EDT 2013
On 08/30/2013 04:53 PM, Sylwester Nawrocki wrote:
> This patch series implements clock deregistration in the common clock
> framework. Comparing to v5 it only includes further corrections of NULL
> clock handling.
[...]
> clk: Provide not locked variant of of_clk_get_from_provider()
> clkdev: Fix race condition in clock lookup from device tree
> clk: Add common __clk_get(), __clk_put() implementations
> clk: Assign module owner of a clock being registered
> clk: Implement clk_unregister
Hi Mike, Russell,
Would you have any further comments/suggestions on this series ?
I have inspected all callers of clk_register() and all should be fine
with regards to dereferencing dev->driver. The first argument to this
function is either NULL or clk_register() is being called in drivers'
probe() callback, which ensures dev->driver won't change due to holding
dev->mutex.
The only issue I found might be at the omap3isp driver, which provides
clock to its sub-drivers and takes reference on the sub-driver modules.
When sub-driver calls clk_get() all modules would get locked in memory,
due to circular reference. One solution to that could be to pass NULL
struct device pointer, as in the below patch.
---------8<------------------
From ca5963041aad67e31324cb5d4d5e2cfce1706d4f Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki at samsung.com>
Date: Thu, 19 Sep 2013 23:52:04 +0200
Subject: [PATCH] omap3isp: Pass NULL device pointer to clk_register()
Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
---
drivers/media/platform/omap3isp/isp.c | 15 ++++++++++-----
drivers/media/platform/omap3isp/isp.h | 1 +
2 files changed, 11 insertions(+), 5 deletions(-)
diff --git a/drivers/media/platform/omap3isp/isp.c
b/drivers/media/platform/omap3isp/isp.c
index df3a0ec..d7f3c98 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -290,9 +290,11 @@ static int isp_xclk_init(struct isp_device *isp)
struct clk_init_data init;
unsigned int i;
+ for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i)
+ isp->xclks[i] = ERR_PTR(-EINVAL);
+
for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i) {
struct isp_xclk *xclk = &isp->xclks[i];
- struct clk *clk;
xclk->isp = isp;
xclk->id = i == 0 ? ISP_XCLK_A : ISP_XCLK_B;
@@ -306,9 +308,9 @@ static int isp_xclk_init(struct isp_device *isp)
xclk->hw.init = &init;
- clk = devm_clk_register(isp->dev, &xclk->hw);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
+ xclk->clk = clk_register(NULL, &xclk->hw);
+ if (IS_ERR(xclk->clk))
+ return PTR_ERR(xclk->clk);
if (pdata->xclks[i].con_id == NULL &&
pdata->xclks[i].dev_id == NULL)
@@ -320,7 +322,7 @@ static int isp_xclk_init(struct isp_device *isp)
xclk->lookup->con_id = pdata->xclks[i].con_id;
xclk->lookup->dev_id = pdata->xclks[i].dev_id;
- xclk->lookup->clk = clk;
+ xclk->lookup->clk = xclk->clk;
clkdev_add(xclk->lookup);
}
@@ -335,6 +337,9 @@ static void isp_xclk_cleanup(struct isp_device *isp)
for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i) {
struct isp_xclk *xclk = &isp->xclks[i];
+ if (!IS_ERR(xclk->clk))
+ clk_unregister(xclk->clk);
+
if (xclk->lookup)
clkdev_drop(xclk->lookup);
}
diff --git a/drivers/media/platform/omap3isp/isp.h
b/drivers/media/platform/omap3isp/isp.h
index cd3eff4..1498f2b 100644
--- a/drivers/media/platform/omap3isp/isp.h
+++ b/drivers/media/platform/omap3isp/isp.h
@@ -135,6 +135,7 @@ struct isp_xclk {
struct isp_device *isp;
struct clk_hw hw;
struct clk_lookup *lookup;
+ struct clk *clk;
enum isp_xclk_id id;
spinlock_t lock; /* Protects enabled and divider */
--
---------8<------------------
Alternatively an additional argument could be added to the clk_register*()
functions. Something like:
---------8<------------------
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 27f8c42..ef934ac 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1837,7 +1837,8 @@ struct clk *__clk_register(struct device *dev,
struct clk_hw *hw)
}
EXPORT_SYMBOL_GPL(__clk_register);
-static int _clk_register(struct device *dev, struct clk_hw *hw, struct
clk *clk)
+static int _clk_register(struct device *dev, struct clk_hw *hw, struct
clk *clk,
+ struct module *owner)
{
int i, ret;
@@ -1877,6 +1878,8 @@ static int _clk_register(struct device *dev,
struct clk_hw *hw, struct clk *clk)
}
}
+ clk->owner = owner;
+
ret = __clk_init(dev, clk);
if (!ret)
return 0;
@@ -1892,7 +1895,7 @@ fail_name:
}
/**
- * clk_register - allocate a new clock, register it and return an
opaque cookie
+ * ___clk_register - allocate a new clock, register it and return an
opaque cookie
* @dev: device that is registering this clock
* @hw: link to hardware-specific clock data
*
@@ -1902,7 +1905,8 @@ fail_name:
* rest of the clock API. In the event of an error clk_register will
return an
* error code; drivers must test for an error code after calling
clk_register.
*/
-struct clk *clk_register(struct device *dev, struct clk_hw *hw)
+struct clk *___clk_register(struct device *dev, struct clk_hw *hw,
+ struct module *owner)
{
int ret;
struct clk *clk;
@@ -1914,7 +1918,7 @@ struct clk *clk_register(struct device *dev,
struct clk_hw *hw)
goto fail_out;
}
- ret = _clk_register(dev, hw, clk);
+ ret = _clk_register(dev, hw, clk, owner);
if (!ret)
return clk;
@@ -1922,7 +1926,7 @@ struct clk *clk_register(struct device *dev,
struct clk_hw *hw)
fail_out:
return ERR_PTR(ret);
}
-EXPORT_SYMBOL_GPL(clk_register);
+EXPORT_SYMBOL_GPL(___clk_register);
/*
* Free memory allocated for a clock.
@@ -2040,7 +2044,8 @@ static void devm_clk_release(struct device *dev,
void *res)
* automatically clk_unregister()ed on driver detach. See
clk_register() for
* more information.
*/
-struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw)
+struct clk *__devm_clk_register(struct device *dev, struct clk_hw *hw,
+ struct module *owner)
{
struct clk *clk;
int ret;
@@ -2049,7 +2054,7 @@ struct clk *devm_clk_register(struct device *dev,
struct clk_hw *hw)
if (!clk)
return ERR_PTR(-ENOMEM);
- ret = _clk_register(dev, hw, clk);
+ ret = _clk_register(dev, hw, clk, owner);
if (!ret) {
devres_add(dev, clk);
} else {
@@ -2059,7 +2064,7 @@ struct clk *devm_clk_register(struct device *dev,
struct clk_hw *hw)
return clk;
}
-EXPORT_SYMBOL_GPL(devm_clk_register);
+EXPORT_SYMBOL_GPL(__devm_clk_register);
static int devm_clk_match(struct device *dev, void *res, void *data)
{
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 13623f3..c656ebf 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -31,6 +31,7 @@
#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate
change */
struct clk_hw;
+struct module;
/**
* struct clk_ops - Callback operations for hardware clocks; these are to
@@ -436,8 +437,21 @@ struct clk *clk_register_composite(struct device
*dev, const char *name,
* rest of the clock API. In the event of an error clk_register will
return an
* error code; drivers must test for an error code after calling
clk_register.
*/
-struct clk *clk_register(struct device *dev, struct clk_hw *hw);
-struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);
+struct clk *___clk_register(struct device *dev, struct clk_hw *hw,
+ struct module *owner);
+
+static inline struct clk *clk_register(struct device *dev, struct
clk_hw *hw)
+{
+ return ___clk_register(dev, hw, THIS_MODULE);
+}
+
+struct clk *__devm_clk_register(struct device *dev, struct clk_hw *hw,
+ struct module *owner);
+static inline struct clk *devm_clk_register(struct device *dev,
+ struct clk_hw *hw)
+{
+ return __devm_clk_register(dev, hw, THIS_MODULE);
+}
void clk_unregister(struct clk *clk);
void devm_clk_unregister(struct device *dev, struct clk *clk);
---------8<------------------
Similarly it would need to be done for the remaining clk_register*()
functions,
which have much longer arguments list.
It's a bit messy, since there is already __clk_register() function with
double
underscore prefix. Perhaps that could be renamed to something else so
all the
functions taking struct module * parameter are prefixed with double
underscore.
I would squash patches 3/5 and 4/5 in the next iteration, if it is decided
to keep using dev->driver->owner.
--
Thanks,
Sylwester
More information about the linux-arm-kernel
mailing list