[net-next PATCH 3/4] drivers: net: cpsw: use cpsw-phy-sel driver to configure phy mode

Mugunthan V N mugunthanvnm at ti.com
Fri Sep 20 15:20:40 EDT 2013


Phy mode can be configured via the cpsw-phy-sel driver, this patch enabled the
cpsw driver to utilise the api provided by the cpsw-phy-sel driver to configure
the phy mode.

Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
Tested-by: Daniel Mack <zonque at gmail.com>
---
 drivers/net/ethernet/ti/cpsw.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 01c42e1..5efb37b 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1021,6 +1021,10 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 		dev_info(priv->dev, "phy found : id is : 0x%x\n",
 			 slave->phy->phy_id);
 		phy_start(slave->phy);
+
+		/* Configure GMII_SEL register */
+		cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface,
+			     slave->slave_num);
 	}
 }
 
-- 
1.8.4




More information about the linux-arm-kernel mailing list