[PATCH 39/51] DMA-API: others: use dma_set_coherent_mask()

Archit Taneja archit at ti.com
Thu Sep 26 06:51:36 EDT 2013


Hi,

On Friday 20 September 2013 04:41 AM, Russell King wrote:
> The correct way for a driver to specify the coherent DMA mask is
> not to directly access the field in the struct device, but to use
> dma_set_coherent_mask().  Only arch and bus code should access this
> member directly.
>
> Convert all direct write accesses to using the correct API.
>
> Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
> ---
>   drivers/ata/pata_ixp4xx_cf.c             |    5 ++++-
>   drivers/gpu/drm/exynos/exynos_drm_drv.c  |    6 +++++-
>   drivers/gpu/drm/omapdrm/omap_dmm_tiler.c |    5 +++--
>   3 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
> index 1ec53f8..ddf470c 100644
> --- a/drivers/ata/pata_ixp4xx_cf.c
> +++ b/drivers/ata/pata_ixp4xx_cf.c
> @@ -144,6 +144,7 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
>   	struct ata_host *host;
>   	struct ata_port *ap;
>   	struct ixp4xx_pata_data *data = dev_get_platdata(&pdev->dev);
> +	int ret;
>
>   	cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> @@ -157,7 +158,9 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
>   		return -ENOMEM;
>
>   	/* acquire resources and fill host */
> -	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> +	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> +	if (ret)
> +		return ret;
>
>   	data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000);
>   	data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000);
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> index bb82ef7..81192d0 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> @@ -286,7 +286,11 @@ static struct drm_driver exynos_drm_driver = {
>
>   static int exynos_drm_platform_probe(struct platform_device *pdev)
>   {
> -	pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> +	int ret;
> +
> +	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> +	if (ret)
> +		return ret;
>
>   	return drm_platform_init(&exynos_drm_driver, pdev);
>   }
> diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
> index acf6678..701c4c1 100644
> --- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
> +++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
> @@ -664,8 +664,9 @@ static int omap_dmm_probe(struct platform_device *dev)
>   	}
>
>   	/* set dma mask for device */
> -	/* NOTE: this is a workaround for the hwmod not initializing properly */
> -	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> +	ret = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
> +	if (ret)
> +		goto fail;

Tested with omapdrm on omap4 panda es board.

Thanks,
Archit




More information about the linux-arm-kernel mailing list