[PATCH 1/2] ARM: msm: Add support for MSM8974 Dragonboard
Mark Rutland
mark.rutland at arm.com
Fri Sep 13 10:40:50 EDT 2013
On Tue, Aug 06, 2013 at 12:02:58AM +0100, Rohit Vaswani wrote:
> This patch adds basic board support for MSM8974 Dragonboard
> which belongs to the Snapdragon 800 family.
> For now, just support a basic machine with device tree.
>
> Signed-off-by: Rohit Vaswani <rvaswani at codeaurora.org>
> ---
> arch/arm/boot/dts/Makefile | 3 ++-
> arch/arm/boot/dts/msm8974-db.dts | 26 ++++++++++++++++++++++++++
> arch/arm/mach-msm/Kconfig | 21 ++++++++++++++++++---
> arch/arm/mach-msm/Makefile | 1 +
> arch/arm/mach-msm/board-dt-8974.c | 23 +++++++++++++++++++++++
> 5 files changed, 70 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/boot/dts/msm8974-db.dts
> create mode 100644 arch/arm/mach-msm/board-dt-8974.c
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 641b3c9a..62cea36 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -97,7 +97,8 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
> kirkwood-openblocks_a6.dtb
> dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
> dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
> - msm8960-cdp.dtb
> + msm8960-cdp.dtb \
> + msm8974-db.dtb
> dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
> armada-370-mirabox.dtb \
> armada-370-rd.dtb \
> diff --git a/arch/arm/boot/dts/msm8974-db.dts b/arch/arm/boot/dts/msm8974-db.dts
> new file mode 100644
> index 0000000..badfc61
> --- /dev/null
> +++ b/arch/arm/boot/dts/msm8974-db.dts
> @@ -0,0 +1,26 @@
> +/dts-v1/;
> +
> +/include/ "skeleton.dtsi"
> +
> +/ {
> + model = "Qualcomm MSM8974 Dragonboard";
> + compatible = "qcom,msm8974-db", "qcom,msm8974";
> + interrupt-parent = <&intc>;
> +
> + intc: interrupt-controller at f9000000 {
> + compatible = "qcom,msm-qgic2";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = < 0xf9000000 0x1000 >,
> + < 0xf9002000 0x1000 >;
> + };
> +
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 2 0xf08>,
> + <1 3 0xf08>,
> + <1 4 0xf08>,
> + <1 1 0xf08>;
> + clock-frequency = <19200000>;
Do you actually need this -- does your firmware and/or bootloader not
set CNTFRQ?
It's *far* preferable to set CNTFRQ. Virtualization hosts and guests
may not handle dt and may expect it to have been programmed as per the
ARM ARM.
Thanks,
Mark.
> + };
> +};
> diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
> index 614e41e..343675b 100644
> --- a/arch/arm/mach-msm/Kconfig
> +++ b/arch/arm/mach-msm/Kconfig
> @@ -1,12 +1,12 @@
> if ARCH_MSM
>
> comment "Qualcomm MSM SoC Type"
> - depends on (ARCH_MSM8X60 || ARCH_MSM8960)
> + depends on ARCH_MSM_DT
>
> choice
> prompt "Qualcomm MSM SoC Type"
> default ARCH_MSM7X00A
> - depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
> + depends on !ARCH_MSM_DT
>
> config ARCH_MSM7X00A
> bool "MSM7x00A / MSM7x01A"
> @@ -60,6 +60,19 @@ config ARCH_MSM8960
> select MSM_SCM if SMP
> select USE_OF
>
> +config ARCH_MSM8974
> + bool "MSM8974"
> + select ARM_GIC
> + select CPU_V7
> + select HAVE_ARM_ARCH_TIMER
> + select HAVE_SMP
> + select MSM_SCM if SMP
> + select USE_OF
> +
> +config ARCH_MSM_DT
> + def_bool y
> + depends on (ARCH_MSM8X60 || ARCH_MSM8960 || ARCH_MSM8974)
> +
> config MSM_HAS_DEBUG_UART_HS
> bool
>
> @@ -68,6 +81,7 @@ config MSM_SOC_REV_A
>
> config ARCH_MSM_ARM11
> bool
> +
> config ARCH_MSM_SCORPION
> bool
>
> @@ -75,6 +89,7 @@ config MSM_VIC
> bool
>
> menu "Qualcomm MSM Board Type"
> + depends on !ARCH_MSM_DT
>
> config MACH_HALIBUT
> depends on ARCH_MSM
> @@ -121,7 +136,7 @@ config MSM_SMD
> bool
>
> config MSM_GPIOMUX
> - depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
> + depends on !ARCH_MSM_DT
> bool "MSM V1 TLMM GPIOMUX architecture"
> help
> Support for MSM V1 TLMM GPIOMUX architecture.
> diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
> index d257ff4..80e3b15 100644
> --- a/arch/arm/mach-msm/Makefile
> +++ b/arch/arm/mach-msm/Makefile
> @@ -29,5 +29,6 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
> obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
> obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o
> obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o
> +obj-$(CONFIG_ARCH_MSM8974) += board-dt-8974.o
> obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
> obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
> diff --git a/arch/arm/mach-msm/board-dt-8974.c b/arch/arm/mach-msm/board-dt-8974.c
> new file mode 100644
> index 0000000..697623e
> --- /dev/null
> +++ b/arch/arm/mach-msm/board-dt-8974.c
> @@ -0,0 +1,23 @@
> +/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/of_platform.h>
> +#include <asm/mach/arch.h>
> +
> +static const char * const msm8974_dt_match[] __initconst = {
> + "qcom,msm8974-db",
> + NULL
> +};
> +
> +DT_MACHINE_START(MSM8974_DT, "Qualcomm MSM (Flattened Device Tree)")
> + .dt_compat = msm8974_dt_match,
> +MACHINE_END
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
>
>
More information about the linux-arm-kernel
mailing list