[PATCH 3/3] KVM: ARM: Add support for Cortex-A7

[Jonathan Austin]

On 26/09/13 17:17, Christoffer Dall wrote:
> On Thu, Sep 26, 2013 at 04:49:28PM +0100, Jonathan Austin wrote:
>> This patch adds support for running Cortex-A7 guests on Cortex-A7 hosts.
>>
>> As Cortex-A7 is architecturally compatible with A15, this patch is largely just
>> generalising existing code. Areas where 'implementation defined' behaviour
>> is identical for A7 and A15 is moved to allow it to be used by both cores.
>>
>> The check to ensure that coprocessor register tables are sorted correctly is
>> also moved in to 'common' code to avoid each new cpu doing its own check
>> (and possibly forgetting to do so!)
>>
>> Signed-off-by: Jonathan Austin <jonathan.austin at arm.com>
>> Acked-by: Marc Zyngier <marc.zyngier at arm.com>
>
> The patch itself looks good, I'm wondering if we are creating potential
> confusion by not having a separate table for shared, but implementation
> defined, co-processors.  One option would be to have multiple levels of
> 'inheritance' of the the coprocessor table, so you could load the
> generic one, overload it with the a15 one, and then overload it with the
> a7 one.  That may be a bit over-engineerd though.
>
> Then again, if A7/A15 end up being just two cores out of many many more,
> it's a bit weird to have their register definitions in the coproc.c
> files and everyone elses in their own files, sort of pushing the problem
> under the rug.
>
> Unless of course we just agree that there are probably not going to be
> that many cores and they're all just going to look a lot like each other
> wrt. to the impdef registers anyhow, so it makes sense to provide this
> default implementation...

Certainly for now it looks this way to me... As Marc says, A12 should 
look a lot like the other cores here.

>
> If nobody else objects, I'm ok with merging this code (once I have a
> chance to test it).  We can always add more logic and move things around
> later, as there's no api breakage or anything like that.

Cool - give me a shout if you need any help with the TC2 setup for 
testing, etc. I used boot-wrapper/mon.axf for hyp booting as you'd 
expect, and board.txt to hold the A15s in reset and select A7s as the 
boot cluster.

Jonny
>
> Thanks for taking care of this!
>
> -Christoffer
>