[PATCH] ARM: at91/at91-pinctrl documentation: add missing sam9x5 compatible string

[Nicolas Ferre]

On 27/08/2013 16:57, Nicolas Ferre :
> On 27/08/2013 15:26, Boris BREZILLON :
>> Add missing "atmel,at91sam9x5-pinctrl" compatible string to the
>> documentation.
>>
>> Signed-off-by: Boris BREZILLON <b.brezillon at overkiz.com>
>
> Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

Linus, it seems that you were not in copy of the original email.

Anyway, do you want that I re-send to you or you can pick it on patchwork?

Here it is:
https://patchwork.kernel.org/patch/2850188/

>> ---
>>    .../bindings/pinctrl/atmel,at91-pinctrl.txt        |    2 +-
>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> index 648d60e..cf7c7bc 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
>> @@ -18,7 +18,7 @@ mode) this pin can work on and the 'config' configures various pad settings
>>    such as pull-up, multi drive, etc.
>>
>>    Required properties for iomux controller:
>> -- compatible: "atmel,at91rm9200-pinctrl"
>> +- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
>>    - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
>>      configured in this periph mode. All the periph and bank need to be describe.
>>
>>
>
>


-- 
Nicolas Ferre