[RFC PATCH 04/15] phy: omap-pipe3: use generic clock names
Roger Quadros
rogerq at ti.com
Thu Sep 19 09:05:32 EDT 2013
From: Kishon Vijay Abraham I <kishon at ti.com>
As this driver is no longer USB specific use generic clock names.
[Roger Q]
- Fix PLL_SD_SHIFT from 9 to 10
- As optclk and wkupclk may not be always required, don't bail out
if they aren't available.
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
drivers/phy/phy-omap-pipe3.c | 71 +++++++++++++++++++++++-------------------
1 files changed, 39 insertions(+), 32 deletions(-)
diff --git a/drivers/phy/phy-omap-pipe3.c b/drivers/phy/phy-omap-pipe3.c
index 63de0f8..807ab8a 100644
--- a/drivers/phy/phy-omap-pipe3.c
+++ b/drivers/phy/phy-omap-pipe3.c
@@ -37,15 +37,15 @@
#define PLL_CONFIGURATION4 0x00000020
#define PLL_REGM_MASK 0x001FFE00
-#define PLL_REGM_SHIFT 0x9
+#define PLL_REGM_SHIFT 9
#define PLL_REGM_F_MASK 0x0003FFFF
-#define PLL_REGM_F_SHIFT 0x0
+#define PLL_REGM_F_SHIFT 0
#define PLL_REGN_MASK 0x000001FE
-#define PLL_REGN_SHIFT 0x1
+#define PLL_REGN_SHIFT 1
#define PLL_SELFREQDCO_MASK 0x0000000E
-#define PLL_SELFREQDCO_SHIFT 0x1
+#define PLL_SELFREQDCO_SHIFT 1
#define PLL_SD_MASK 0x0003FC00
-#define PLL_SD_SHIFT 0x9
+#define PLL_SD_SHIFT 10
#define SET_PLL_GO 0x1
#define PLL_TICOPWDN 0x10000
#define PLL_LOCK 0x2
@@ -232,23 +232,21 @@ static int omap_pipe3_probe(struct platform_device *pdev)
phy->dev = &pdev->dev;
- phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
- if (IS_ERR(phy->wkupclk)) {
- dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
- return PTR_ERR(phy->wkupclk);
- }
- clk_prepare(phy->wkupclk);
+ phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
+ if (IS_ERR(phy->wkupclk))
+ dev_dbg(&pdev->dev, "unable to get wkupclk\n");
+ else
+ clk_prepare(phy->wkupclk);
- phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
- if (IS_ERR(phy->optclk)) {
- dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n");
- return PTR_ERR(phy->optclk);
- }
- clk_prepare(phy->optclk);
+ phy->optclk = devm_clk_get(phy->dev, "optclk");
+ if (IS_ERR(phy->optclk))
+ dev_dbg(&pdev->dev, "unable to get optclk\n");
+ else
+ clk_prepare(phy->optclk);
- phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin");
+ phy->sys_clk = devm_clk_get(phy->dev, "sysclk");
if (IS_ERR(phy->sys_clk)) {
- pr_err("%s: unable to get sys_clkin\n", __func__);
+ dev_err(&pdev->dev, "unable to get sysclk\n");
return -EINVAL;
}
@@ -290,8 +288,10 @@ static int omap_pipe3_remove(struct platform_device *pdev)
{
struct omap_pipe3 *phy = platform_get_drvdata(pdev);
- clk_unprepare(phy->wkupclk);
- clk_unprepare(phy->optclk);
+ if (!IS_ERR(phy->wkupclk))
+ clk_unprepare(phy->wkupclk);
+ if (!IS_ERR(phy->optclk))
+ clk_unprepare(phy->optclk);
if (!pm_runtime_suspended(&pdev->dev))
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -305,8 +305,10 @@ static int omap_pipe3_runtime_suspend(struct device *dev)
{
struct omap_pipe3 *phy = dev_get_drvdata(dev);
- clk_disable(phy->wkupclk);
- clk_disable(phy->optclk);
+ if (!IS_ERR(phy->wkupclk))
+ clk_disable(phy->wkupclk);
+ if (!IS_ERR(phy->optclk))
+ clk_disable(phy->optclk);
return 0;
}
@@ -316,22 +318,27 @@ static int omap_pipe3_runtime_resume(struct device *dev)
u32 ret = 0;
struct omap_pipe3 *phy = dev_get_drvdata(dev);
- ret = clk_enable(phy->optclk);
- if (ret) {
- dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
- goto err1;
+ if (!IS_ERR(phy->optclk)) {
+ ret = clk_enable(phy->optclk);
+ if (ret) {
+ dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
+ goto err1;
+ }
}
- ret = clk_enable(phy->wkupclk);
- if (ret) {
- dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
- goto err2;
+ if (!IS_ERR(phy->wkupclk)) {
+ ret = clk_enable(phy->wkupclk);
+ if (ret) {
+ dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+ goto err2;
+ }
}
return 0;
err2:
- clk_disable(phy->optclk);
+ if (!IS_ERR(phy->optclk))
+ clk_disable(phy->optclk);
err1:
return ret;
--
1.7.4.1
More information about the linux-arm-kernel
mailing list