[PATCH v2 3/3] ARM: OMAP2: delete board-rm680
Aaro Koskinen
aaro.koskinen at iki.fi
Tue Sep 24 15:28:17 EDT 2013
Delete board file for Nokia RM-680/RM-696 (N950/N9). DT-based booting
should be used for further development on this HW.
Signed-off-by: Aaro Koskinen <aaro.koskinen at iki.fi>
---
arch/arm/mach-omap2/Kconfig | 7 --
arch/arm/mach-omap2/Makefile | 1 -
arch/arm/mach-omap2/board-rm680.c | 167 --------------------------------------
3 files changed, 175 deletions(-)
delete mode 100644 arch/arm/mach-omap2/board-rm680.c
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f6a1db1..6850bf9 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -310,13 +310,6 @@ config MACH_NOKIA_N8X0
select MACH_NOKIA_N810_WIMAX
select OMAP_PACKAGE_ZAC
-config MACH_NOKIA_RM680
- bool "Nokia N950 (RM-680) / N9 (RM-696) phones"
- depends on ARCH_OMAP3
- default y
- select MACH_NOKIA_RM696
- select OMAP_PACKAGE_CBB
-
config MACH_NOKIA_RX51
bool "Nokia N900 (RX-51) phone"
depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f8d4a1b..1d2917b 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
-obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
deleted file mode 100644
index 345e8c4..0000000
--- a/arch/arm/mach-omap2/board-rm680.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Board support file for Nokia N950 (RM-680) / N9 (RM-696).
- *
- * Copyright (C) 2010 Nokia
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/i2c/twl.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "mux.h"
-#include "gpmc.h"
-#include "mmc.h"
-#include "hsmmc.h"
-#include "sdram-nokia.h"
-#include "common-board-devices.h"
-#include "gpmc-onenand.h"
-
-static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/* Fixed regulator for internal eMMC */
-static struct regulator_init_data rm680_vemmc = {
- .constraints = {
- .name = "rm680_vemmc",
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS
- | REGULATOR_CHANGE_MODE,
- },
- .num_consumer_supplies = ARRAY_SIZE(rm680_vemmc_consumers),
- .consumer_supplies = rm680_vemmc_consumers,
-};
-
-static struct fixed_voltage_config rm680_vemmc_config = {
- .supply_name = "VEMMC",
- .microvolts = 2900000,
- .gpio = 157,
- .startup_delay = 150,
- .enable_high = 1,
- .init_data = &rm680_vemmc,
-};
-
-static struct platform_device rm680_vemmc_device = {
- .name = "reg-fixed-voltage",
- .dev = {
- .platform_data = &rm680_vemmc_config,
- },
-};
-
-static struct platform_device *rm680_peripherals_devices[] __initdata = {
- &rm680_vemmc_device,
-};
-
-/* TWL */
-static struct twl4030_gpio_platform_data rm680_gpio_data = {
- .pullups = BIT(0),
- .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
-};
-
-static struct twl4030_platform_data rm680_twl_data = {
- .gpio = &rm680_gpio_data,
- /* add rest of the children here */
-};
-
-static void __init rm680_i2c_init(void)
-{
- omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
- omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data);
- omap_register_i2c_bus(2, 400, NULL, 0);
- omap_register_i2c_bus(3, 400, NULL, 0);
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
- defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data[] = {
- {
- .gpio_irq = 65,
- .flags = ONENAND_SYNC_READWRITE,
- }
-};
-#endif
-
-/* eMMC */
-static struct omap2_hsmmc_info mmc[] __initdata = {
- {
- .name = "internal",
- .mmc = 2,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
- { /* Terminator */ }
-};
-
-static void __init rm680_peripherals_init(void)
-{
- platform_add_devices(rm680_peripherals_devices,
- ARRAY_SIZE(rm680_peripherals_devices));
- rm680_i2c_init();
- gpmc_onenand_init(board_onenand_data);
- omap_hsmmc_init(mmc);
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init rm680_init(void)
-{
- struct omap_sdrc_params *sdrc_params;
-
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_serial_init();
-
- sdrc_params = nokia_get_sdram_timings();
- omap_sdrc_init(sdrc_params, sdrc_params);
-
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
- rm680_peripherals_init();
-}
-
-MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3630_init_early,
- .init_irq = omap3_init_irq,
- .handle_irq = omap3_intc_handle_irq,
- .init_machine = rm680_init,
- .init_late = omap3630_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3630_init_early,
- .init_irq = omap3_init_irq,
- .handle_irq = omap3_intc_handle_irq,
- .init_machine = rm680_init,
- .init_late = omap3630_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
--
1.8.4.rc3
More information about the linux-arm-kernel
mailing list