[PATCH v4 4/4] ARM: dts: am335x-bone-common: add cpu0 and mmc1 triggers

[Koen Kooi]

This matches the vendor 3.8.x configuration that is shipping with the boards.

The LED layout is now:

USR0: heartbeat
USR1: mmc0 (micro-SD slot)
USR2: cpu0
USR3: mmc1 (eMMC)

The cpu0 triggers was put in between the mmc triggers to make is easier to see
where the disk activity is.

Signed-off-by: Koen Kooi <koen at dominion.thruhere.net>
---
 arch/arm/boot/dts/am335x-bone-common.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 303df81..adce9fe 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -204,12 +204,14 @@
 		led at 4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
 		led at 5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
 			default-state = "off";
 		};
 	};
-- 
1.8.2.1