[PATCH v2 8/9] ARM: dts: AM33XX: Add LCDC info into am335x-evm

[Joel Fernandes]

From: Benoit Parrot <bparrot at ti.com>

Add LCDC device node in DT for am33xx
Add LCDC and Panel info in DT for am335x-evm

Changes:
- remove redundant/unnecessary SoC specific setting in the board dts
- resolved conflicts on for_3.13/dts

Signed-off-by: Benoit Parrot <bparrot at ti.com>
Signed-off-by: Joel Fernandes <joelf at ti.com>
---
 arch/arm/boot/dts/am335x-evm.dts | 71 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/am33xx.dtsi    |  9 +++++
 2 files changed, 80 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 86463fa..b73f41f 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -85,6 +85,40 @@
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			800x480p62 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
 };
 
 &am33xx_pinmux {
@@ -212,6 +246,39 @@
 			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+		>;
+	};
 };
 
 &uart0 {
@@ -308,6 +375,10 @@
 	};
 };
 
+&lcdc {
+	status = "okay";
+};
+
 &elm {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d7be90a..f870d0b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -682,6 +682,15 @@
 			status = "disabled";
 		};
 
+		lcdc: lcdc at 4830e000 {
+			compatible = "ti,am33xx-tilcdc";
+			reg = <0x4830e000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <36>;
+			ti,hwmods = "lcdc";
+			status = "disabled";
+		};
+
 		tscadc: tscadc at 44e0d000 {
 			compatible = "ti,am3359-tscadc";
 			reg = <0x44e0d000 0x1000>;
-- 
1.8.1.2