[PATCH 7/7] Staging/iio/adc/touchscreen/MXS: provide devicetree adaption
Jürgen Beisert
jbe at pengutronix.de
Mon Sep 23 03:42:29 EDT 2013
Hi Jonathan,
On Saturday 21 September 2013 14:42:37 Jonathan Cameron wrote:
> The device tree list has moved, so I've changed the cc.
>
> Few comments inline. Basically I'd go for longer more
> descriptive names when the abreviation isn't a really
> well known common one.
>
> Note I'm not all that familiar with device tree conventions
> so may be barking up the wrong tree ;)
>
> > [...]
> > @@ -9,13 +10,38 @@ Optional properties:
> > - fsl,lradc-touchscreen-wires: Number of wires used to connect the
> > touchscreen to LRADC. Valid value is either 4 or 5. If this property is
> > not present, then the touchscreen is -
> > disabled.
>
> Do we want that lradc prefix on these other properties?
The question is, if we want to keep it. This is the currently used binding.
> > + disabled. 5 wires is valid for i.MX28 SoC only.
> > +- fsl,ave-ctrl: number of samples per direction to calculate an average value.
> > + Allowed value is 1 ... 31, default is 4
>
> This naming seems less than informative, what about fsl,average_num_samples
> of average_count (ave isn't all that obvious an abrevaition of average).
I used already existing names from
"Documentation/devicetree/bindings/input/touchscreen/stmpe.txt".
> > +- fsl,ave-delay: delay between consecutive samples. Allowed value is
> > + 1 ... 2047. It is used if 'fsl,ave-ctrl' > 1, counts at
> > + 2 kHz and its default is 2 (= 1 ms)
>
> fsl,average_intersample_delay (I assume any limit of device tree property
> names is longer than that?)
If the parameter description in "Documentation/devicetree/bindings" is useful,
we don't need long parameter names. If there is no useful parameter
description, we will need long names ;)
Regards,
Juergen
--
Pengutronix e.K. | Juergen Beisert |
Linux Solutions for Science and Industry | http://www.pengutronix.de/ |
More information about the linux-arm-kernel
mailing list