[PATCH V5 5/9] USB: OHCI: make ohci-at91 a separate driver

Nicolas Ferre nicolas.ferre at atmel.com
Mon Sep 23 08:22:59 EDT 2013


On 21/09/2013 13:08, Manjunath Goudar :
> Separate the  TI OHCI Atmel host controller driver from ohci-hcd

Why "TI" here? ?


> host code so that it can be built as a separate driver module.
> This work is part of enabling multi-platform kernels on ARM.
>
> Signed-off-by: Manjunath Goudar <manjunath.goudar at linaro.org>
> Signed-off-by: Deepak Saxena <dsaxena at linaro.org>
> Acked-by: Alan Stern <stern at rowland.harvard.edu>

Otherwise, seems correct.

Acked-by: Nicolas Ferre <nicolas.ferre at atmel.com>

> Cc: Arnd Bergmann <arnd at arndb.de>
> Cc: Greg KH <greg at kroah.com>
> Cc: linux-usb at vger.kernel.org
>
> V3->V4:
>   - Removed extra space after "tristate".
>   - Removed extra space between function name  and '(' characters.
>   - MODULE_ALIAS line moved to last statement of ohci-at91 file.
>
> V2->V3:
>   -The ohci_restart() function is not required in  current scenario,
>    only discarding connection state of integrated transceivers is sufficient,
>    for this directly handling ohci->hc_control.
>
> V1->V2:
>   -Set non-standard fields in ohci_at91_hc_driver manually, rather than
>    relying on an expanded struct ohci_driver_overrides.
>   -Save orig_ohci_hub_control and orig_ohci_hub_status_data rather than
>    relying on ohci_hub_control and hub_status_data being exported.
>   -ohci_setup() has been removed because it is called in .reset member
>    of the ohci_hc_driver structure.
> ---
>   drivers/usb/host/Kconfig     |    8 +++
>   drivers/usb/host/Makefile    |    1 +
>   drivers/usb/host/ohci-at91.c |  156 +++++++++++++++++++-----------------------
>   drivers/usb/host/ohci-hcd.c  |   18 -----
>   4 files changed, 79 insertions(+), 104 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 00d22f5..6900b72 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -382,6 +382,14 @@ config USB_OHCI_HCD_SPEAR
>             Enables support for the on-chip OHCI controller on
>             ST SPEAr chips.
>
> +config USB_OHCI_HCD_AT91
> +        tristate "Support for Atmel on-chip OHCI USB controller"
> +        depends on USB_OHCI_HCD && ARCH_AT91
> +        default y
> +        ---help---
> +          Enables support for the on-chip OHCI controller on
> +          Atmel chips.
> +
>   config USB_OHCI_HCD_OMAP3
>   	tristate "OHCI support for OMAP3 and later chips"
>   	depends on (ARCH_OMAP3 || ARCH_OMAP4)
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 9efcb7c..0d7a81a 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -50,6 +50,7 @@ obj-$(CONFIG_USB_OHCI_EXYNOS)	+= ohci-exynos.o
>   obj-$(CONFIG_USB_OHCI_HCD_OMAP1)	+= ohci-omap.o
>   obj-$(CONFIG_USB_OHCI_HCD_OMAP3)	+= ohci-omap3.o
>   obj-$(CONFIG_USB_OHCI_HCD_SPEAR)	+= ohci-spear.o
> +obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
>
>   obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
>   obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index caa3764..476b5a5 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -13,19 +13,24 @@
>    */
>
>   #include <linux/clk.h>
> -#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
>   #include <linux/of_platform.h>
>   #include <linux/of_gpio.h>
> +#include <linux/platform_device.h>
>   #include <linux/platform_data/atmel.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/usb.h>
> +#include <linux/usb/hcd.h>
>
>   #include <mach/hardware.h>
>   #include <asm/gpio.h>
>
>   #include <mach/cpu.h>
>
> -#ifndef CONFIG_ARCH_AT91
> -#error "CONFIG_ARCH_AT91 must be defined."
> -#endif
> +
> +#include "ohci.h"
>
>   #define valid_port(index)	((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
>   #define at91_for_each_port(index)	\
> @@ -33,7 +38,17 @@
>
>   /* interface, function and usb clocks; sometimes also an AHB clock */
>   static struct clk *iclk, *fclk, *uclk, *hclk;
> +/* interface and function clocks; sometimes also an AHB clock */
> +
> +#define DRIVER_DESC "OHCI Atmel driver"
> +
> +static const char hcd_name[] = "ohci-atmel";
> +
> +static struct hc_driver __read_mostly ohci_at91_hc_driver;
>   static int clocked;
> +static int (*orig_ohci_hub_control)(struct usb_hcd  *hcd, u16 typeReq,
> +			u16 wValue, u16 wIndex, char *buf, u16 wLength);
> +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
>
>   extern int usb_disabled(void);
>
> @@ -117,6 +132,8 @@ static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
>   static int usb_hcd_at91_probe(const struct hc_driver *driver,
>   			struct platform_device *pdev)
>   {
> +	struct at91_usbh_data *board;
> +	struct ohci_hcd *ohci;
>   	int retval;
>   	struct usb_hcd *hcd = NULL;
>
> @@ -177,8 +194,10 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>   		}
>   	}
>
> +	board = hcd->self.controller->platform_data;
> +	ohci = hcd_to_ohci(hcd);
> +	ohci->num_ports = board->ports;
>   	at91_start_hc(pdev);
> -	ohci_hcd_init(hcd_to_ohci(hcd));
>
>   	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
>   	if (retval == 0)
> @@ -238,36 +257,6 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
>   }
>
>   /*-------------------------------------------------------------------------*/
> -
> -static int
> -ohci_at91_reset (struct usb_hcd *hcd)
> -{
> -	struct at91_usbh_data	*board = dev_get_platdata(hcd->self.controller);
> -	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
> -	int			ret;
> -
> -	if ((ret = ohci_init(ohci)) < 0)
> -		return ret;
> -
> -	ohci->num_ports = board->ports;
> -	return 0;
> -}
> -
> -static int
> -ohci_at91_start (struct usb_hcd *hcd)
> -{
> -	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
> -	int			ret;
> -
> -	if ((ret = ohci_run(ohci)) < 0) {
> -		dev_err(hcd->self.controller, "can't start %s\n",
> -			hcd->self.bus_name);
> -		ohci_stop(hcd);
> -		return ret;
> -	}
> -	return 0;
> -}
> -
>   static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
>   {
>   	if (!valid_port(port))
> @@ -297,8 +286,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
>    */
>   static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
>   {
> -	struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
> -	int length = ohci_hub_status_data(hcd, buf);
> +	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
> +	int length = orig_ohci_hub_status_data(hcd, buf);
>   	int port;
>
>   	at91_for_each_port(port) {
> @@ -376,7 +365,8 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>   		break;
>   	}
>
> -	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
> +	ret = orig_ohci_hub_control(hcd, typeReq, wValue, wIndex + 1,
> +				buf, wLength);
>   	if (ret)
>   		goto out;
>
> @@ -430,51 +420,6 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
>
>   /*-------------------------------------------------------------------------*/
>
> -static const struct hc_driver ohci_at91_hc_driver = {
> -	.description =		hcd_name,
> -	.product_desc =		"AT91 OHCI",
> -	.hcd_priv_size =	sizeof(struct ohci_hcd),
> -
> -	/*
> -	 * generic hardware linkage
> -	 */
> -	.irq =			ohci_irq,
> -	.flags =		HCD_USB11 | HCD_MEMORY,
> -
> -	/*
> -	 * basic lifecycle operations
> -	 */
> -	.reset =		ohci_at91_reset,
> -	.start =		ohci_at91_start,
> -	.stop =			ohci_stop,
> -	.shutdown =		ohci_shutdown,
> -
> -	/*
> -	 * managing i/o requests and associated device resources
> -	 */
> -	.urb_enqueue =		ohci_urb_enqueue,
> -	.urb_dequeue =		ohci_urb_dequeue,
> -	.endpoint_disable =	ohci_endpoint_disable,
> -
> -	/*
> -	 * scheduling support
> -	 */
> -	.get_frame_number =	ohci_get_frame,
> -
> -	/*
> -	 * root hub support
> -	 */
> -	.hub_status_data =	ohci_at91_hub_status_data,
> -	.hub_control =		ohci_at91_hub_control,
> -#ifdef CONFIG_PM
> -	.bus_suspend =		ohci_bus_suspend,
> -	.bus_resume =		ohci_bus_resume,
> -#endif
> -	.start_port_reset =	ohci_start_port_reset,
> -};
> -
> -/*-------------------------------------------------------------------------*/
> -
>   static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
>   {
>   	struct platform_device *pdev = data;
> @@ -703,7 +648,11 @@ ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
>   	 * REVISIT: some boards will be able to turn VBUS off...
>   	 */
>   	if (at91_suspend_entering_slow_clock()) {
> -		ohci_usb_reset (ohci);
> +		ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
> +		ohci->hc_control &= OHCI_CTRL_RWC;
> +		ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
> +		ohci->rh_state = OHCI_RH_HALTED;
> +
>   		/* flush the writes */
>   		(void) ohci_readl (ohci, &ohci->regs->control);
>   		at91_stop_clock();
> @@ -730,8 +679,6 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
>   #define ohci_hcd_at91_drv_resume  NULL
>   #endif
>
> -MODULE_ALIAS("platform:at91_ohci");
> -
>   static struct platform_driver ohci_hcd_at91_driver = {
>   	.probe		= ohci_hcd_at91_drv_probe,
>   	.remove		= ohci_hcd_at91_drv_remove,
> @@ -744,3 +691,40 @@ static struct platform_driver ohci_hcd_at91_driver = {
>   		.of_match_table	= of_match_ptr(at91_ohci_dt_ids),
>   	},
>   };
> +
> +static int __init ohci_at91_init(void)
> +{
> +	if (usb_disabled())
> +		return -ENODEV;
> +
> +	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
> +	ohci_init_driver(&ohci_at91_hc_driver, NULL);
> +
> +	/*
> +	 * The Atmel HW has some unusual quirks, which require Atmel-specific
> +	 * workarounds. We override certain hc_driver functions here to
> +	 * achieve that. We explicitly do not enhance ohci_driver_overrides to
> +	 * allow this more easily, since this is an unusual case, and we don't
> +	 * want to encourage others to override these functions by making it
> +	 * too easy.
> +	 */
> +
> +	orig_ohci_hub_control = ohci_at91_hc_driver.hub_control;
> +	orig_ohci_hub_status_data = ohci_at91_hc_driver.hub_status_data;
> +
> +	ohci_at91_hc_driver.hub_status_data	= ohci_at91_hub_status_data;
> +	ohci_at91_hc_driver.hub_control		= ohci_at91_hub_control;
> +
> +	return platform_driver_register(&ohci_hcd_at91_driver);
> +}
> +module_init(ohci_at91_init);
> +
> +static void __exit ohci_at91_cleanup(void)
> +{
> +	platform_driver_unregister(&ohci_hcd_at91_driver);
> +}
> +module_exit(ohci_at91_cleanup);
> +
> +MODULE_DESCRIPTION(DRIVER_DESC);
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:at91_ohci");
> diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
> index 523f58e..2fdaaf8 100644
> --- a/drivers/usb/host/ohci-hcd.c
> +++ b/drivers/usb/host/ohci-hcd.c
> @@ -1192,11 +1192,6 @@ MODULE_LICENSE ("GPL");
>   #define EP93XX_PLATFORM_DRIVER	ohci_hcd_ep93xx_driver
>   #endif
>
> -#ifdef CONFIG_ARCH_AT91
> -#include "ohci-at91.c"
> -#define AT91_PLATFORM_DRIVER	ohci_hcd_at91_driver
> -#endif
> -
>   #ifdef CONFIG_ARCH_LPC32XX
>   #include "ohci-nxp.c"
>   #define NXP_PLATFORM_DRIVER	usb_hcd_nxp_driver
> @@ -1310,12 +1305,6 @@ static int __init ohci_hcd_mod_init(void)
>   		goto error_ep93xx;
>   #endif
>
> -#ifdef AT91_PLATFORM_DRIVER
> -	retval = platform_driver_register(&AT91_PLATFORM_DRIVER);
> -	if (retval < 0)
> -		goto error_at91;
> -#endif
> -
>   #ifdef NXP_PLATFORM_DRIVER
>   	retval = platform_driver_register(&NXP_PLATFORM_DRIVER);
>   	if (retval < 0)
> @@ -1339,10 +1328,6 @@ static int __init ohci_hcd_mod_init(void)
>   	platform_driver_unregister(&NXP_PLATFORM_DRIVER);
>    error_nxp:
>   #endif
> -#ifdef AT91_PLATFORM_DRIVER
> -	platform_driver_unregister(&AT91_PLATFORM_DRIVER);
> - error_at91:
> -#endif
>   #ifdef EP93XX_PLATFORM_DRIVER
>   	platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
>    error_ep93xx:
> @@ -1394,9 +1379,6 @@ static void __exit ohci_hcd_mod_exit(void)
>   #ifdef NXP_PLATFORM_DRIVER
>   	platform_driver_unregister(&NXP_PLATFORM_DRIVER);
>   #endif
> -#ifdef AT91_PLATFORM_DRIVER
> -	platform_driver_unregister(&AT91_PLATFORM_DRIVER);
> -#endif
>   #ifdef EP93XX_PLATFORM_DRIVER
>   	platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
>   #endif
>


-- 
Nicolas Ferre



More information about the linux-arm-kernel mailing list