[PATCH 06/11] iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor

[Lee Jones]

Due to the MACRO used, the task of reading, understanding and maintaining
the LPS331AP's channel descriptor is substantially difficult. This patch
is based on the view that it's better to have easy to read, maintainable
code than to save a few lines here and there. For that reason we're
expanding the array so initialisation is completed in full.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/iio/pressure/st_pressure_core.c | 45 +++++++++++++++++++++++++--------
 1 file changed, 34 insertions(+), 11 deletions(-)

diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index becfb25..7ba9299 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -58,16 +58,39 @@
 #define ST_PRESS_LPS331AP_OUT_XL_ADDR		0x28
 #define ST_TEMP_LPS331AP_OUT_L_ADDR		0x2b
 
-static const struct iio_chan_spec st_press_channels[] = {
-	ST_SENSORS_LSM_CHANNELS(IIO_PRESSURE,
+static const struct iio_chan_spec st_press_lsp331ap_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.channel2 = IIO_NO_MOD,
+		.address = ST_PRESS_LPS331AP_OUT_XL_ADDR,
+		.scan_index = ST_SENSORS_SCAN_X,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 24,
+			.storagebits = 24,
+			.endianness = IIO_LE,
+		},
+		.info_mask_separate =
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
-			ST_SENSORS_SCAN_X, 0, IIO_NO_MOD, 'u', IIO_LE, 24, 24,
-			ST_PRESS_LPS331AP_OUT_XL_ADDR),
-	ST_SENSORS_LSM_CHANNELS(IIO_TEMP,
-			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
-						BIT(IIO_CHAN_INFO_OFFSET),
-			-1, 0, IIO_NO_MOD, 's', IIO_LE, 16, 16,
-			ST_TEMP_LPS331AP_OUT_L_ADDR),
+		.modified = 0,
+	},
+	{
+		.type = IIO_TEMP,
+		.channel2 = IIO_NO_MOD,
+		.address = ST_TEMP_LPS331AP_OUT_L_ADDR,
+		.scan_index = -1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.modified = 0,
+	},
 	IIO_CHAN_SOFT_TIMESTAMP(1)
 };
 
@@ -77,7 +100,7 @@ static const struct st_sensors st_press_sensors[] = {
 		.sensors_supported = {
 			[0] = LPS331AP_PRESS_DEV_NAME,
 		},
-		.ch = (struct iio_chan_spec *)st_press_channels,
+		.ch = (struct iio_chan_spec *)st_press_lsp331ap_channels,
 		.odr = {
 			.addr = ST_PRESS_LPS331AP_ODR_ADDR,
 			.mask = ST_PRESS_LPS331AP_ODR_MASK,
@@ -214,7 +237,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 	pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
 	pdata->multiread_bit = pdata->sensor->multi_read_bit;
 	indio_dev->channels = pdata->sensor->ch;
-	indio_dev->num_channels = ARRAY_SIZE(st_press_channels);
+	indio_dev->num_channels = ARRAY_SIZE(st_press_lsp331ap_channels);
 
 	pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
 						&pdata->sensor->fs.fs_avl[0];
-- 
1.8.1.2