[PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black

[Felipe Balbi]

Hi,

On Mon, Sep 09, 2013 at 04:26:38PM +0200, Koen Kooi wrote:
> 
> Op 9 sep. 2013, om 16:15 heeft Felipe Balbi <balbi at ti.com> het volgende geschreven:
> 
> > Hi,
> > 
> > On Mon, Sep 09, 2013 at 03:45:50PM +0200, Koen Kooi wrote:
> >> The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added,
> >> so create a common dtsi both can use.
> >> 
> >> IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver 
> >> after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead
> >> of 1.8. 
> >> 
> >> MMC support for AM335x still isn't in, so only the LDO change has been added.
> >> 
> >> Signed-off-by: Koen Kooi <koen at dominion.thruhere.net>
> >> Tested-by: Tom Rini <trini at ti.com>
> >> Tested-by: Matt Porter <matt.porter at linaro.org>
> > 
> > not entirelly related to $SUBJECT but having HDMI listed in BBB DTS will
> > prevent the use of RF cape, no ?
> 
> Complete and utter lack of software from TI for the RF cape is
> preventing the RF cape from working regardless of HDMI entries.

How would you ever use RF cape with HDMI on BBB ? It doesn't matter the
amount of code TI (or whoever else) writes down, that will never work
fine.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130909/32939fd7/attachment.sig>