[PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black

[Koen Kooi]

Op 9 sep. 2013, om 16:15 heeft Felipe Balbi <balbi at ti.com> het volgende geschreven:

> Hi,
> 
> On Mon, Sep 09, 2013 at 03:45:50PM +0200, Koen Kooi wrote:
>> The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added,
>> so create a common dtsi both can use.
>> 
>> IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver 
>> after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead
>> of 1.8. 
>> 
>> MMC support for AM335x still isn't in, so only the LDO change has been added.
>> 
>> Signed-off-by: Koen Kooi <koen at dominion.thruhere.net>
>> Tested-by: Tom Rini <trini at ti.com>
>> Tested-by: Matt Porter <matt.porter at linaro.org>
> 
> not entirelly related to $SUBJECT but having HDMI listed in BBB DTS will
> prevent the use of RF cape, no ?

Complete and utter lack of software from TI for the RF cape is preventing the RF cape from working regardless of HDMI entries.