[PATCH] ARM: OMAP5/DRA7: realtime_counter: Configure CNTFRQ register

[Sricharan R]

On Wednesday 18 September 2013 07:01 PM, Santosh Shilimkar wrote:
> On Wednesday 18 September 2013 07:23 AM, Sricharan R wrote:
>> The realtime counter called master counter, produces the count
>> used by the private timer peripherals in the MPU_CLUSTER. The
>> CNTFRQ per cpu register is used to denote the frequency of the counter.
>> Currently the frequency value is passed from the
>> DT file, but this is not scalable when we have other non-DT guest
>> OS. This register must be set to the right value by the
>> host OS, as this will be propagated to the guests as well.
>>
> Its not host OS but ROM code/secure code. Host OS is not
> ideal place to set it up.
 ok, so you are suggesting to re word this right ?
>> More discussions and the reason for adding this in a non-DT
>> way can be seen from below.
>> http://www.mail-archive.com/linux-omap@vger.kernel.org/msg93832.html
>>
>> So configuring this secure register for all the cpus here.
>>
>> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
>> Cc: Nishanth Menon <nm at ti.com>
>> Cc: Rajendra Nayak <rnayak at ti.com>
>> Cc: Marc Zyngier <marc.zyngier at arm.com>
>> Cc: Mark Rutland <mark.rutland at arm.com>
>> Cc: Tony Lindgren <tony at atomide.com>
>> Signed-off-by: Sricharan R <r.sricharan at ti.com>
>> ---
>>  arch/arm/mach-omap2/omap-secure.h |    2 ++
>>  arch/arm/mach-omap2/omap-smp.c    |    9 +++++++++
>>  arch/arm/mach-omap2/timer.c       |    6 ++++++
>>  3 files changed, 17 insertions(+)
>>
>> diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
>> index a171a5a..4de9a00 100644
>> --- a/arch/arm/mach-omap2/omap-secure.h
>> +++ b/arch/arm/mach-omap2/omap-secure.h
>> @@ -51,6 +51,8 @@
>>  
>>  #define OMAP5_MON_AMBA_IF_INDEX		0x108
>>  
>> +#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX	0x109
>> +
> Nice. Looks like OMAP5 ES2.0 addition which I missed.
>
>>  /* Secure PPA(Primary Protected Application) APIs */
>>  #define OMAP4_PPA_L2_POR_INDEX		0x23
>>  #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
>> diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
>> index 98a1146..00873b4 100644
>> --- a/arch/arm/mach-omap2/omap-smp.c
>> +++ b/arch/arm/mach-omap2/omap-smp.c
>> @@ -41,6 +41,8 @@
>>  
>>  u16 pm44xx_errata;
>>  
>> +extern unsigned long arch_timer_freq;
>> +
>>  /* SCU base address */
>>  static void __iomem *scu_base;
>>  
>> @@ -66,6 +68,13 @@ static void __cpuinit omap4_secondary_init(unsigned int cpu)
>>  							4, 0, 0, 0, 0, 0);
>>  
>>  	/*
>> +	 * Configure the CNTFRQ register for the secondary cpu's which
>> +	 * indicates the frequency of the cpu local timers.
>> +	 */
>> +	if (soc_is_omap54xx() || soc_is_dra7xx())
> CNTFREQ programming was not supported on OMAP5 ES1.0 and that was one
> of the reason this parameter came into picture. So you need to skip
> the ES1.0 here. 
 We do not intend to support ES1.0 right ? . ok then id.c needs to be
 cleaned up to remove ES1.0 traces.
>> +		omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
>> +
>> +	/*
>>  	 * Synchronise with the boot thread.
>>  	 */
>>  	spin_lock(&boot_lock);
>> diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
>> index fd9238d..2c499f3 100644
>> --- a/arch/arm/mach-omap2/timer.c
>> +++ b/arch/arm/mach-omap2/timer.c
>> @@ -55,6 +55,7 @@
>>  #include "soc.h"
>>  #include "common.h"
>>  #include "powerdomain.h"
>> +#include "omap-secure.h"
>>  
>>  #define REALTIME_COUNTER_BASE				0x48243200
>>  #define INCREMENTER_NUMERATOR_OFFSET			0x10
>> @@ -65,6 +66,7 @@
>>  
>>  static struct omap_dm_timer clkev;
>>  static struct clock_event_device clockevent_gpt;
>> +unsigned long arch_timer_freq;
>>  
>>  static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
>>  {
>> @@ -546,7 +548,11 @@ static void __init realtime_counter_init(void)
>>  	reg |= den;
>>  	__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);
>>  
>> +	arch_timer_freq = (rate / den) * num;
>> +
>>  	iounmap(base);
>> +
>> +	omap_smc1(OMAP5_DRA7_MON_SET_CNTFRQ_INDEX, arch_timer_freq);
> Few problems with this approach..
>
> 1. CNTFREQ needs to be programmed on all CPUs. Even though arch-timer
> code uses boot-cpu now thats not safe for guest which can start on
> secondary CPUs. So please update this in secondary boot path as well.
The patch is doing this for secondary cpu's as well in the
call back  omap4_secondary_init.

> 2. When you power cycle CPU, you will loose the value of this register
> so you need to reprogram them on every CPU power up. Both DRA and OMAP5
> doesn't support that part yet but do remember to patch that when
> such support gets added.
 oh ok. did not realize this. Will add the change for this then.
> Can you please fix above comments and repost. I will ack that then.
>
> Regards,
> Santosh
>
Regards,
 Sricharan