[PATCH v2 0/9] mmc: sdhci-esdhc-imx: add SD3.0 support

[Chris Ball]

Hi Shawn, Sascha,

On Fri, Sep 13 2013, Dong Aisheng wrote:
> This patch series add SD3.0 support for i.MX6Q/DL.
> Since freescale i.MX6Q/DL uSDHC clock tuning progress is a little different from
> the standard tuning process defined in host controller spec v3.0.
> So we add a hook to allow execute platform specific tuning instead of
> standard host controller tuning.
>
> The main difference are:
> 1) not only generate Buffer Read Ready interrupt when tuning is performing.
> It generates all other DATA interrupts like the normal data command.
> 2) SDHCI_CTRL_EXEC_TUNING is not automatically cleared by HW,
> instead it's controlled by SW.
> 3) SDHCI_CTRL_TUNED_CLK is not automatically set by HW,
> it's controlled by SW.
> 4) the clock delay for every tuning is set by SW.
>
> Tested on i.MX6Q Sabreauto board.

Please could someone ACK this series?  Thanks,

- Chris.
-- 
Chris Ball   <cjb at laptop.org>   <http://printf.net/>