[PATCH RESEND v5 2/2] PXA: add PWM nodes to pxa27x.dtsi

[Mike Dunn]

This patch adds PWM nodes for each of the four channels present on the
pxa270.

Signed-off-by: Mike Dunn <mikedunn at newsguy.com>
---
 arch/arm/boot/dts/pxa27x.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index d7c5d72..a705469 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -10,5 +10,29 @@
 			marvell,intc-priority;
 			marvell,intc-nr-irqs = <34>;
 		};
+
+		pwm0: pwm at 40b00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm1: pwm at 40b00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm2: pwm at 40c00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm3: pwm at 40c00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+		};
 	};
 };
-- 
1.8.1.5