[PATCH 32/38] iio: accel-core: st: Move LSM303DLH into correct group

[Lee Jones]

The LSM303DLH's WAI (WhoAmI) is 0x33, meaning it should be enabled by
Accel Sensor group one. For the device to probe without error, we'll
need to ensure it's registered with the correct WAI.

Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/iio/accel/st_accel_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index ea62291..03a2b6b 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -170,6 +170,7 @@ static const struct st_sensors st_accel_sensors[] = {
 			[2] = LSM330D_ACCEL_DEV_NAME,
 			[3] = LSM330DL_ACCEL_DEV_NAME,
 			[4] = LSM330DLC_ACCEL_DEV_NAME,
+			[5] = LSM303DLH_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
@@ -238,8 +239,7 @@ static const struct st_sensors st_accel_sensors[] = {
 		.sensors_supported = {
 			[0] = LIS331DLH_ACCEL_DEV_NAME,
 			[1] = LSM303DL_ACCEL_DEV_NAME,
-			[2] = LSM303DLH_ACCEL_DEV_NAME,
-			[3] = LSM303DLM_ACCEL_DEV_NAME,
+			[2] = LSM303DLM_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-- 
1.8.1.2