[PATCH v5 3/4] media: s5p-tv: Fix sdo driver to work with CCF

Mateusz Krawczuk m.krawczuk at partner.samsung.com
Sat Sep 21 11:00:48 EDT 2013


Replace clk_enable by clock_enable_prepare and clk_disable with clk_disable_unprepare.
Clock prepare is required by Clock Common Framework, and old clock driver didn`t support it.
Without it Common Clock Framework prints a warning.

Signed-off-by: Mateusz Krawczuk <m.krawczuk at partner.samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 drivers/media/platform/s5p-tv/sdo_drv.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/s5p-tv/sdo_drv.c b/drivers/media/platform/s5p-tv/sdo_drv.c
index e49ac6c..17272e1 100644
--- a/drivers/media/platform/s5p-tv/sdo_drv.c
+++ b/drivers/media/platform/s5p-tv/sdo_drv.c
@@ -208,9 +208,9 @@ static int sdo_streamon(struct sdo_device *sdev)
 	clk_get_rate(sdev->fout_vpll));
 	/* enable clock in SDO */
 	sdo_write_mask(sdev, SDO_CLKCON, ~0, SDO_TVOUT_CLOCK_ON);
-	ret = clk_enable(sdev->dacphy);
+	ret = clk_prepare_enable(sdev->dacphy);
 	if (ret < 0) {
-		dev_err(sdev->dev, "clk_enable(dacphy) failed\n");
+		dev_err(sdev->dev, "clk_prepare_enable(dacphy) failed\n");
 		goto fail;
 	}
 	/* enable DAC */
@@ -229,7 +229,7 @@ static int sdo_streamoff(struct sdo_device *sdev)
 	int tries;
 
 	sdo_write_mask(sdev, SDO_DAC, 0, SDO_POWER_ON_DAC);
-	clk_disable(sdev->dacphy);
+	clk_disable_unprepare(sdev->dacphy);
 	sdo_write_mask(sdev, SDO_CLKCON, 0, SDO_TVOUT_CLOCK_ON);
 	for (tries = 100; tries; --tries) {
 		if (sdo_read(sdev, SDO_CLKCON) & SDO_TVOUT_CLOCK_READY)
@@ -273,7 +273,7 @@ static int sdo_runtime_suspend(struct device *dev)
 	dev_info(dev, "suspend\n");
 	regulator_disable(sdev->vdet);
 	regulator_disable(sdev->vdac);
-	clk_disable(sdev->sclk_dac);
+	clk_disable_unprepare(sdev->sclk_dac);
 	return 0;
 }
 
@@ -285,7 +285,7 @@ static int sdo_runtime_resume(struct device *dev)
 
 	dev_info(dev, "resume\n");
 
-	ret = clk_enable(sdev->sclk_dac);
+	ret = clk_prepare_enable(sdev->sclk_dac);
 	if (ret < 0)
 		return ret;
 
@@ -318,7 +318,7 @@ static int sdo_runtime_resume(struct device *dev)
 vdac_r_dis:
 	regulator_disable(sdev->vdac);
 dac_clk_dis:
-	clk_disable(sdev->sclk_dac);
+	clk_disable_unprepare(sdev->sclk_dac);
 	return ret;
 }
 
@@ -424,7 +424,11 @@ static int sdo_probe(struct platform_device *pdev)
 	}
 
 	/* enable gate for dac clock, because mixer uses it */
-	clk_enable(sdev->dac);
+	ret = clk_prepare_enable(sdev->dac);
+	if (ret < 0) {
+		dev_err(dev, "clk_prepare_enable(dac) failed\n");
+		goto fail_fout_vpll;
+	}
 
 	/* configure power management */
 	pm_runtime_enable(dev);
@@ -463,7 +467,7 @@ static int sdo_remove(struct platform_device *pdev)
 	struct sdo_device *sdev = sd_to_sdev(sd);
 
 	pm_runtime_disable(&pdev->dev);
-	clk_disable(sdev->dac);
+	clk_disable_unprepare(sdev->dac);
 	clk_put(sdev->fout_vpll);
 	clk_put(sdev->dacphy);
 	clk_put(sdev->dac);
-- 
1.8.1.2




More information about the linux-arm-kernel mailing list