[RFC PATCH 09/15] ata: ti_sata: Add Texas Instruments SATA Wrapper driver
Roger Quadros
rogerq at ti.com
Thu Sep 19 09:05:37 EDT 2013
Texas Instruments SoCs like OMAP5 and DRA7 contain a SATA wrapper
around the AHCI SATA core. This driver will manage that.
CC: Tejun Heo <tj at kernel.org>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
Documentation/devicetree/bindings/ata/ti-sata.txt | 31 ++++
drivers/ata/Kconfig | 7 +
drivers/ata/Makefile | 1 +
drivers/ata/sata_ti.c | 160 +++++++++++++++++++++
4 files changed, 199 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ata/ti-sata.txt
create mode 100644 drivers/ata/sata_ti.c
diff --git a/Documentation/devicetree/bindings/ata/ti-sata.txt b/Documentation/devicetree/bindings/ata/ti-sata.txt
new file mode 100644
index 0000000..bf0ea3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ti-sata.txt
@@ -0,0 +1,31 @@
+* Texas Instruments SATA Controller Wrapper
+
+Required properties:
+- compatible : "ti,sata"
+- ti,hwmods : "sata"
+- reg : Register mapping
+- #address-cells: <1>
+- #size-cells : <1>
+- ranges : allows valid translation between child's address space and parent's
+ address space.
+- Must contain at least one child node for the SATA controller core
+
+Example:
+
+ sata: sata at 4a141100 {
+ compatible = "ti,sata";
+ ti,hwmods = "sata";
+ reg = <0x4a141100 0x7>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ dwc-ahci at 4a140000 {
+ compatible = "snps,dwc-ahci";
+ reg = <0x4a140000 0x1100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&sata_ref_clk>;
+ clock-names = "optclk";
+ };
+ };
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a53ef27..a3de4d2 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -138,6 +138,13 @@ config SATA_SIL24
If unsure, say N.
+config SATA_TI
+ tristate "Texas Instruments SATA Wrapper driver"
+ depends on ARCH_OMAP
+ help
+ This options enables SATA Wrapper driver for Texas Instruments SoCs.
+ It is found on OMAP5 and DRA7.
+
config ATA_SFF
bool "ATA SFF support (for legacy IDE and PATA)"
default y
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 46518c6..673ba5e 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
+obj-$(CONFIG_SATA_TI) += sata_ti.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/sata_ti.c b/drivers/ata/sata_ti.c
new file mode 100644
index 0000000..0b9093d
--- /dev/null
+++ b/drivers/ata/sata_ti.c
@@ -0,0 +1,160 @@
+/**
+ * sata-ti.c - Texas Instruments Specific SATA Glue layer
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Authors: Roger Quadros <rogerq at ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+/*
+ * All these registers belong to OMAP's Wrapper around the
+ * DesignWare SATA Core.
+ */
+
+#define SATA_SYSCONFIG 0x0000
+#define SATA_CDRLOCK 0x0004
+
+struct ti_sata {
+ struct device *dev;
+ void __iomem *base;
+};
+
+static int ti_sata_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct ti_sata *sata;
+ struct resource *res;
+ void __iomem *base;
+ int ret;
+
+ if (!np) {
+ dev_err(dev, "device node not found\n");
+ return -EINVAL;
+ }
+
+ sata = devm_kzalloc(dev, sizeof(*sata), GFP_KERNEL);
+ if (!sata)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, sata);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "missing memory base resource\n");
+ return -EINVAL;
+ }
+
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ sata->dev = dev;
+ sata->base = base;
+
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "pm_runtime_get_sync failed with err %d\n",
+ ret);
+ goto runtime_disable;
+ }
+
+ ret = of_platform_populate(np, NULL, NULL, dev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to create TI SATA children\n");
+ goto runtime_put;
+ }
+
+ return 0;
+
+runtime_put:
+ pm_runtime_put_sync(dev);
+
+runtime_disable:
+ pm_runtime_disable(dev);
+
+ return ret;
+}
+
+static int ti_sata_remove_child(struct device *dev, void *c)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ platform_device_unregister(pdev);
+
+ return 0;
+}
+
+static int ti_sata_remove(struct platform_device *pdev)
+{
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ device_for_each_child(&pdev->dev, NULL, ti_sata_remove_child);
+
+ return 0;
+}
+
+static const struct of_device_id of_ti_sata_match[] = {
+ {
+ .compatible = "ti,sata"
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_ti_sata_match);
+
+#ifdef CONFIG_PM
+
+static int ti_sata_resume(struct device *dev)
+{
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops ti_sata_dev_pm_ops = {
+ .resume = ti_sata_resume,
+};
+
+#define DEV_PM_OPS (&ti_sata_dev_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver ti_sata_driver = {
+ .probe = ti_sata_probe,
+ .remove = ti_sata_remove,
+ .driver = {
+ .name = "ti-sata",
+ .of_match_table = of_ti_sata_match,
+ .pm = DEV_PM_OPS,
+ },
+};
+
+module_platform_driver(ti_sata_driver);
+
+MODULE_ALIAS("platform:ti-sata");
+MODULE_AUTHOR("Roger Quadros <rogerq at ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI SATA Glue Layer");
--
1.7.4.1
More information about the linux-arm-kernel
mailing list