[PATCH v2 0/9] wilink: add device tree support

[Pavel Machek]

Hi!

> > > This is a follow-up on a previous patch set that had a smaller
> > > audience.  This time, I added the lists and people who were involved
> > > in the review of the bindings documentation, since most of my changes
> > > in v2 are coming from discussions there.
> > >
> > > This patch series adds device tree support to the wlcore_sdio driver,
> > > which is used by WiLink6, WiLink7 and WiLink8.
> > 
> > Could you perhaps consider doing device tree conversion for wl1251
> > too? With the knowledge you have from working on this series, it would
> > be much easier for you to do it than for someone else, and I don't
> > have much hope someone will do it at all. It's WiLink series chip
> > after all. Without this pandora and N900 are going to lose wifi
> > support after the switch to dt-only kernel.
> 
> Unfortunately I don't have much time to work on wl1251.  I think it
> wouldn't be too difficult to do though, so patches are welcome. ;)
> 
> Maybe you could try to make this change and I could support you if
> needed?
> 
> 
> > I can offer you my help testing things on pandora and I'm sure someone
> > here could try it on N900.
> 
> I could try it on the N900, if it is still bootable easily with the
> mainline. ;)

3.11 should be bootable on mainline, including device tree and
video. (But excluding some other stuff, like MMC.)

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html