[PATCH 3/4] ARM: STi: Supply I2C configuration to STiH415 SoC

[Lee Jones]

On Wed, 18 Sep 2013, Maxime COQUELIN wrote:

> This patch supplies I2C configuration to STiH415 SoC.
> 
> Cc: Srinivas Kandagatla <srinivas.kandagatla at st.com>
> Signed-off-by: Maxime Coquelin <maxime.coquelin at st.com>
> ---
>  arch/arm/boot/dts/stih415-pinctrl.dtsi |   36 ++++++++++++++++++++
>  arch/arm/boot/dts/stih415.dtsi         |   57 ++++++++++++++++++++++++++++++++
>  2 files changed, 93 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
> index 1d322b2..e56449d 100644
> --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
> @@ -86,6 +86,24 @@
>  					};
>  				};
>  			};
> +
> +			sbc_i2c0 {
> +				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
> +					st,pins {
> +						sda = <&PIO4 6 ALT1 BIDIR>;
> +						scl = <&PIO4 5 ALT1 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			sbc_i2c1 {
> +				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
> +					st,pins {
> +						sda = <&PIO3 2 ALT2 BIDIR>;
> +						scl = <&PIO3 1 ALT2 BIDIR>;
> +					};
> +				};
> +			};
>  		};
>  
>  		pin-controller-front {
> @@ -143,6 +161,24 @@
>  				reg		= <0x7000 0x100>;
>  				st,bank-name	= "PIO12";
>  			};
> +
> +			i2c0 {
> +				pinctrl_i2c0_default: i2c0-default {
> +					st,pins {
> +						sda = <&PIO9 3 ALT1 BIDIR>;
> +						scl = <&PIO9 2 ALT1 BIDIR>;
> +					};
> +				};
> +			};
> +
> +			i2c1 {
> +				pinctrl_i2c1_default: i2c1-default {
> +					st,pins {
> +						sda = <&PIO12 1 ALT1 BIDIR>;
> +						scl = <&PIO12 0 ALT1 BIDIR>;
> +					};
> +				};
> +			};
>  		};
>  
>  		pin-controller-rear {
> diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
> index 74ab8de..643ae1c 100644
> --- a/arch/arm/boot/dts/stih415.dtsi
> +++ b/arch/arm/boot/dts/stih415.dtsi
> @@ -9,6 +9,7 @@
>  #include "stih41x.dtsi"
>  #include "stih415-clock.dtsi"
>  #include "stih415-pinctrl.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>  / {
>  
>  	L2: cache-controller {
> @@ -83,5 +84,61 @@
>  			pinctrl-names 	= "default";
>  			pinctrl-0	= <&pinctrl_sbc_serial1>;
>  		};
> +
> +		i2c0: i2c at fed40000{

Space before the '{'.

> +			compatible	= "st,comms-i2c";
> +			status		= "disabled";

Consider putting the node status at the bottom.

> +			reg		= <0xfed40000 0x110>;
> +			interrupts	=  <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
> +			clocks		= <&CLKS_ICN_REG_0>;
> +			clock-frequency = <400000>;
> +			pinctrl-names	= "default";
> +			pinctrl-0	= <&pinctrl_i2c0_default>;
> +			st,glitches;
> +			st,glitch-clk	= <500>;
> +			st,glitch-dat	= <500>;
> +		};
> +
> +		i2c1: i2c at fed41000{

Same here and throughout.

> +			compatible	= "st,comms-i2c";
> +			status		= "disabled";

Same here and throughout.

> +			reg		= <0xfed41000 0x110>;
> +			interrupts	=  <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>;
> +			clocks		= <&CLKS_ICN_REG_0>;
> +			clock-frequency = <400000>;
> +			pinctrl-names	= "default";
> +			pinctrl-0	= <&pinctrl_i2c1_default>;
> +			st,glitches;
> +			st,glitch-clk	= <500>;
> +			st,glitch-dat	= <500>;
> +		};
> +
> +		sbc_i2c0: i2c at fe540000{
> +			compatible	= "st,comms-i2c";
> +			status		= "disabled";
> +			reg		= <0xfe540000 0x110>;
> +			interrupts	=  <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>;
> +			clocks		= <&CLK_SYSIN>;
> +			clock-frequency = <400000>;
> +			pinctrl-names	= "default";
> +			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
> +			st,glitches;
> +			st,glitch-clk	= <500>;
> +			st,glitch-dat	= <500>;
> +		};
> +
> +		sbc_i2c1: i2c at fe541000{
> +			compatible	= "st,comms-i2c";
> +			status		= "disabled";
> +			reg		= <0xfe541000 0x110>;
> +			interrupts	=  <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>;
> +			clocks		= <&CLK_SYSIN>;
> +			clock-frequency = <400000>;
> +			pinctrl-names	= "default";
> +			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
> +			st,glitches;
> +			st,glitch-clk	= <500>;
> +			st,glitch-dat	= <500>;
> +		};
>  	};
>  };

Is this odd tabbing just the result of the patch format?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog